Jump to content

Watch of Today


mk3

Recommended Posts

43 minutes ago, KelSolaar said:

Hey, snap! Mines actually a tsar. I'm a sucker for jubes, so I put it on this Strapcode Angus Jubilee:

 

P_20181210_133002_1_1_1.jpg

P_20181210_132843_1_1.jpg

P_20181210_132850_1_1_1.jpg

I like Jubilee bracelets also . It the one you have the larger link then another model ? 

I think it's strap code that has the option of  for 2 link sizes . Not pos if it is them .

 

I had about 2 different  Dive bracelets  on mine before the Marathon one I have on it came up in an auction I won . It came with both the Great Seal of the United States , and the Canadian Maple leaf deployment clasps .

They can get pricy for some reason . 

Link to comment
Share on other sites

32 minutes ago, ricardopalamino said:

I like Jubilee bracelets also . It the one you have the larger link then another model ? 

I think it's strap code that has the option of  for 2 link sizes . Not pos if it is them .

 

I had about 2 different  Dive bracelets  on mine before the Marathon one I have on it came up in an auction I won . It came with both the Great Seal of the United States , and the Canadian Maple leaf deployment clasps .

They can get pricy for some reason . 

Yes, I think the Angus is the newer and larger of the 2 styles of jubilee that strapcode sell. Thought it best to go for that due to the height of the marathon watch. 

Good find to get them from an auction. The marathon straps are quite nice. I have a neutral one (no seal or maple leaf).

Link to comment
Share on other sites

Today It´s time to present some Swedish coolness, Lagonda. This brand was a mail order watch from the late 40's and onward to an for me unknown date. It was an OEM watch made for a mail order company in Gothenburg.
They came with a wide range of movement's from Felsa, AS, ST, ETA and many others and up to a whooping 41 jewels (no idea where the amount of jewels would go). 
This watch is a Lagonda Amiral Sport, naval and sports what a great combo ! (Amiral = swedish for Admiral).
Powered with an AS/ST 1950/51 it's hammering away with a beat of 21600 A/h against your wrist.

A great fun for a great price..

Lagonda.jpg

  • Like 5
Link to comment
Share on other sites

Lagonda .. nice watch and a nice car ..


A mellow yellow golden boy, Tissot Stylist from the mid 70's. Perfect for a Wednesday as this when it's dark in the morning going to work and dark in the evening 
coming from work...
This one is powered by a Tissot 2541. Tick rate is around 21600 A/h. 

Tissot.jpg

  • Like 2
Link to comment
Share on other sites

Maybe this is more to everyone's taste.

AsPurchased2.thumb.jpg.ed38ab597936b28059c109888fd65637.jpg

It doesn't really count as my watch of the day though since it is still in transit, and in need of some TLC before I can wear it.

On the plus side its not every day you get a watch named after you. Queue the 'I didn't know your name was "The Hatton"' .. quips.

It easily blew my 404 budget I must confess.

  • Like 4
Link to comment
Share on other sites

Andrew & Co.. looks the previous owner used slightly too small dies in the glass press, it will turn into a real gem in your hands.
I'm eager to see the movement in that one.( Hopefully maybe  Amida cal 515 or 535 which i never seen before..)
 

Link to comment
Share on other sites

Cortibert Spirofix. Sometimes you just don't have any intentions to buy any new watches, but then all of a sudden your curiosity hits like a 5 pound meat club.
The inner voice says "Spirofix wounder what kind of movement a watch called like that uses" and boom the poltergeist in your laptop has ordered it and it is on it's way.
When it arrives I silence my inner voices with the argument that I have to practice to make perfect....
Inside it one can find a Corbert Cal.677 cough fin at 18000A/h.
I haven't cleaned the dial and exterior yet (bought it two years ago) but it is in the plans, like with cars my philosophy is "Check the engine first !" if it don't run it's done.

Cortebert1.jpg

Cortebert2.jpg

Edited by HSL
  • Like 2
Link to comment
Share on other sites

On 12/13/2018 at 6:03 AM, HSL said:

....  if it don't run it's done.

 

If it don't run, its more fun. I at least like to get to the point where I put it in the "for spare parts" pile, so figuring out why "it don't run" keeps me amused for a while. I do have a couple of "well it kinda runs.. sort of.." watches that I will eventually figure out when I get more time to tinker with them, they are in the "on its final warning before it goes for spare parts" pile. 

Link to comment
Share on other sites

Here comes a surprise  IWC Shaffhausen Watch Co.. Flatline Quartz.. Have I gone over to the dark side..
No curiosity killed the cat but not me, something with the high end quarts still resembles an mechanical movement, it just

misses an escapement and balance otherwise you find a 7 juvel train bridge and a nice movement work.
The powerhouse is an IWC C.2250 with the stamp of V8 promising an roar when applied on the wrist.
I have seen the V8 sign is associated with Tissot but it pops up on al the modern quarts movements and mechanical movements I have looked at lately, what does it stand for? 

IWC_Flatline.jpg

Quarts.jpg

  • Like 2
Link to comment
Share on other sites

Back to a mechanical watch .. maybe not the most exiting since it´s not really vintage.. A Fortis Flieger 24h.
This is powered by a modest ETA 2893--2 stomping at 28800A/h . Well in about 40 years from now it's a real vintage watch.

Fortis_Face.jpg

Fortis_Back.jpg

Link to comment
Share on other sites

3 hours ago, MattWatch said:

Watch for me today is this lovely vintage Oris that I gave a little going over last night. Slightly on the smaller side for my personal taste but a nice old watch nonetheless.

I like this....has a beautiful look reminiscent of Omega constellation from the 50's.

 

J

Link to comment
Share on other sites

CYMA Navy Star with an Automatic Movement Cal.824.00 ticking away at 21600 A/h. The good thing with airing your movements once now and then is you get to know when it's time for a service.
This little rascal has an action on the day setting which I don't like so I will not push it to much before servicing it.

CYMA1.jpg

CYMA2.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So here is the new base (v 2.1), I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked/felt a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded.   The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool.   Note, I think you may need to print supports for the new internal shelf created? Modular Movement Holder.pdf  
    • Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking.  Watch this video. It think it'll give you an idea of the task ahead. From your 1st photo, I think you have a etachron type stud. Let me see if I can find a video on how to remove it from the arm.
    • Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • Good job, that band matches the watch perfectly.
×
×
  • Create New...