Jump to content

Watch of Today


mk3

Recommended Posts

I found this Summit on ebay going for not much £ - just loved the look of it. The hands are beautifully blued. 

A clean+oil, new mainspring and strap, it's running well and looks great 

The movement is a 17J A Schild 1130, which would date it to 1955-60, but it looks more modern to me.

Anyone heard of Summit ?

 

 

20160709_172719.jpg

20160709_184810.jpg

  • Like 10
Link to comment
Share on other sites

NIce watch.

I have heard of Summit, had one go through my hands a few years ago. If I remember correctly it was a 1970's gold plated auto with an AS movement. Sadly no pics though as I was without a camera at the time.

Link to comment
Share on other sites

Quick fix on Philippines watch, got this from watchguy, finally got around to looking at it, broken winding rotor, looks like it just fell apart, think I paid more for shipping:startle: anyway checked overall movement 7s36a /cleaned brace, reblackened '60' at top with permanent marker, polished up crystal a bit and running good, like those blue dialed Seikos!DSCF0233.JPG

  • Like 3
Link to comment
Share on other sites

18 hours ago, mikepilk said:

The movement is a 17J A Schild 1130, which would date it to 1955-60, but it looks more modern to me.

Anyone heard of Summit ?

I'm also working on a Summit watch right now (ETA 1120) which stylistically looks a little older than yours. The dial certainly isn't in such great condition! But I also wondered about the make and found this discussion via Google:

http://www.sheffieldforum.co.uk/archive/index.php/t-1239861.html

Quote
04-11-2013, 19:41
Does anyone have any information on the history of Summit Watches,I understand these were made at Summit House on Nursery St and were supplied to the forces in ww2.Better still anyone got one to sell? Did anyone work there?

My first job on leaving school was as an apprentice watchmaker at Summit House on Nursery Street. Norman Churchill was the main watchmaker who taught me a lot about the trade. I can tell you that no watches were made at Summit house, however, they were assembled there because that was one of my jobs. Mr Booles was the chief buyer and was often dispatched to Switzerland to buy watch movements. These arrived in boxes of 100 or so and I had the job of fitting each one into a watch case. Sometimes solid gold, but more often cheaper metal. 

The cheaper movements were given a new name (Leda) and the more expensive ones, Summit. That was another of my jobs, removing whatever name was printed on the dial and then printing either Summit or Leda. the degree of precision was astounding really to say it was all hand done. 

I love getting some historical background to watches I'm trying to repair. Please share anything else you find!

Nick

  • Like 1
Link to comment
Share on other sites

3 hours ago, jdm said:

I don't know what's going here on with all these Seiko! It's time to end it!

28212659216_a655bc86b9_c.jpg

SARY056, a real JDM. I totally love it, pimpadelic!

 

 

 

Now that's just not fair posting things like that to upset me :D That is absolutely stunning, really like that :thumbsu:

That summit is a real gem also, unbelievably clean and sharp.

 

Mean while im faced with 3 x brand new Seiko's on my bench which have been drowned in.........WD40 :pulling-hair-out:

DSC05228.JPG

 

Why lord do people do this :(

 

  • Like 3
Link to comment
Share on other sites

4 hours ago, MrBeat said:

 

 

Now that's just not fair posting things like that to upset me :D That is absolutely stunning, really like that :thumbsu:

That summit is a real gem also, unbelievably clean and sharp.

 

Mean while im faced with 3 x brand new Seiko's on my bench which have been drowned in.........WD40 :pulling-hair-out:

DSC05228.JPG

 

Why lord do people do this :(

 

Wow that is about as bad an oil bath as I've ever seen. People that do this are able to open a watch case, but past that have absolutely no idea of what they are doing.

JC

Link to comment
Share on other sites

Sadly all three had loose case backs so i assume they were undone and then filled from back. One watch is complete and clean but with very minor dial stains ( despite cleaning ), the second requires a new balance and the third is being done today. Hopefully the third one is fine after cleaning but the amount of wd40 is getting all over everything so i have to wash all tools and trays after disassembly.

But on a upward note i should have my German chronometer finished today so i will post pictures when that's done :thumbsu:

Link to comment
Share on other sites

2 hours ago, MrBeat said:

... the amount of wd40 is getting all over everything so i have to wash all tools and trays after disassembly.

 

I'd almost think it would have been worth rinsing the whole movement (except perhaps the date rings) in naptha and letting it dry before disassembly.

Link to comment
Share on other sites

19 minutes ago, svorkoetter said:

I'd almost think it would have been worth rinsing the whole movement (except perhaps the date rings) in naptha and letting it dry before disassembly.

Actually funny you mention that coz thats what i just did...sadly noticed the balance was mangled but luckily i got more parts coming soon :)

 

On a brighter note two new watches freshly finished today. The Junghans has taken about two months to perfect but its worth it because there's no point saying chronometer on the dial if the movements not up to scratch. The Tissot was thrown away in rubbish but i wasn't put off by the damaged casing and broken movement it was worth the time and effort.

 

Junghans J82/1 Chronometer - Serviced & repaired, balance rebuilt, hands polished and re lumed, dial refinished to original spec with new lume and hand polished indices, Italian made Ostrich strap ( super soft ).

DSC05233.JPGDSC05128.JPG

 

Tissot 28.5R-21 Automatic - Serviced & Repaired ,Dial Cleaned ,Hands cleaned, Rotor restored ( Dial markers were gone/moved before i cleaned her :( )

DSC05234.JPGDSC05212.JPG

The pair ready to wear :)

DSC05231.JPG

 

I have an unusual Orient watch now commanding my attention so im back off into the fray :D

  • Like 5
Link to comment
Share on other sites

So after 6 weeks finally finished a little side project Orient which will be one of my daily wears me thinks. Can not find any original photos of what this watch looked like originally but it had an outer casing secured with massive screws ( now replaced with Swiss short screws ). Movement suffered moisture damage but each part was treated and cleaned, replaced seconds pinion.

Promise this will be last post for a while :)

 

Orient Diver - 46943 Automatic - Screwdown Crown - Casing hand polished - Case back satin finished on lathe - Glass surround damage removed on lathe , left as satin finish - New domed Japanese glass - NATO Strap

DSC05243.JPGDSC05244.JPGDSC05239.JPG

 

If anyone can find a photo of what this model was supposed to look like id be interested :thumbsu:

Anyway that's it from me for a while, time for cuppa tea :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...