Jump to content

Watch of Today


mk3

Recommended Posts

Office bound today so the Lemania gets an outing.

post-73-0-96631000-1446628808_thumb.jpg

Probably my best car boot score to date at just £7.50.

Filthy dirty and not running but all it needed was a COA, a light polish, and a replacement crystal and strap.

  • Like 5
Link to comment
Share on other sites

I'm really quite enjoying this thread. Partly because of all the fantastic watches that other people are posting, but also because I am really looking at my own collection and rediscovering neglected pieces. Today's offering is a case in point; my Mondia Sea Scout.

post-73-0-18738100-1446725555_thumb.jpg

I mentioned this one in an earlier post as the watch that first got me interested in the Mondia brand. It was my 16th birthday present from my parents and my first proper watch so has a lot of sentimental value.

Needs a service and a new crystal but otherwise a great little watch.

  • Like 1
Link to comment
Share on other sites

Tough choice GuiBer, they're all rather splendid. I think I'd have to toss a coin between the one on the left and the one on the right.

Today I have gone for the Huntana.

post-73-0-18235600-1446818680_thumb.jpg

I just love the dial on this one. It has a UT6325 inside and is the loudest watch I have ever come across.

Link to comment
Share on other sites

That's a much better pic GuiBer and it is indeed a handsome watch, but I still think I prefer the dial design on the other two.

 

As for the Huntana this is the first and only example that I have found but it represents what to me is a rich source of damned good watches on the cheap; namely the little guys that were plentiful in the pre-quartz era but were too small to survive the onslaught of the electronic age. There were many such brands out there who assembled quality movements from the likes of ETA, A Schild, Unitas, etc into decent quality stock cases and just added their own branded dials. Because they are brands that no one has heard of they tend to go for peanuts, so you can get a hell of a lot of watch for your money.

Link to comment
Share on other sites

In fact I also prefer the more "classic" design of the other two, (which differ only in the colour of the hour and minute hands).

 

Furthermore the Citizen/Noblia doesn´t belong to me anymore, I sold it to a Noblia collector. (The photos were taken some days ago!)

 

Thanks for your information about Huntana and other interesting brands that doesn't exist anymore, which is really a pitty!

Link to comment
Share on other sites

Blue Dial Rolex Date model for me today, been sick for a few days with some virus thing that has been going around and have had this on for a few days now. I do like this watch, it matches its grey dial sister posted earlier in the thread.

post-1462-0-84367500-1447103890_thumb.jp

Edited by mk3
  • Like 1
Link to comment
Share on other sites

I was away from work the last couple of days with a cold, but there was a bright spot on Monday; I got a package in the mail from Komsomolsk, Ukraine, containing this little item:

 

IMG_0152_zpsqvyvq5fa.jpg

 

It's a "Signal", which was apparently a Poljot under the skin. The markings on the dial indicate that it was made by the First Moscow Watch Factory in Kirov. I'm not sure of the date, but the vendor estimates sometime in the 1950s.

 

Speaking of dial markings, note the "15, 30, 45" between the hour indices. These are intended as a reference when setting the alarm via the upper crown and the hand pointed at 4:00 in the photo. It has two separate mainsprings, one for the movement and another for the alarm. With the alarm spring wound, it sounds at the specified time, sounding like the watch is blowing a tiny razzberry at you.

 

As for the movement, here's a photo taken by the vendor:

 

Signal_movement_zpsfyxt35hd.jpg

 

As you can see, the alarm works have their own bridge at the lower right. At bottom, you can just make out the star wheel that actuates a little hammer that taps the inside of the case. It whizzes pretty rapidly, and when fully wound, the alarm sounds for only a few seconds. To reset the alarm for next time, you just rewind its spring.

 

I really like this one! The case is about medium size, smaller than my other watches, so it almost looks delicate. But I find it very interesting, and I look forward to wearing it regularly.

 

Cheers,

 

Gryf

  • Like 2
Link to comment
Share on other sites

An odd feature of the Signal that I've noticed is that it has lume dots at 12, 3, 6, and 9, but no lume on the hands or anywhere else. As far as I know, these are the original hands. The same vendor had postings for two other Signals nearly identical to mine, and the hands were the same on all of them, with no lume. Go figure...

 

@mk3 - That's a very handsome Armitron! I like the combination of brushed stainless and polished gold.

 

Gryf

Link to comment
Share on other sites

Today's watch of the day is a D Series Rolex Submariner 50th Anniversary Edition watch with green bezel. Bought new in 2005 and worn once or maybe twice but as I brought it out in response to another thread I'm going to wear this watch today.

 

 

post-1462-0-05746800-1447620183_thumb.jp

post-1462-0-07095100-1447620199_thumb.jp

post-1462-0-01217900-1447620217_thumb.jp

post-1462-0-92097000-1447620224_thumb.jp

post-1462-0-38726000-1447620238_thumb.jp

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So here is the new base, I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded. The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool. Note, I think you may need to print supports for the new internal shelf created? Modular Movement Holder v2.pdf Modular Movement Holder v2.pdf
    • Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking. 
    • Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • Good job, that band matches the watch perfectly.
×
×
  • Create New...