Jump to content

Watch of Today


mk3

Recommended Posts

I love the Dynasty jump hour watch too, it is in quite nice condition considering the age and keeps good time still. These sometimes pop up on ebay as spares or repairs but are often pretty badly beaten up though.

 

I would be interested to see your project when completed or as progress is made. :)

Link to comment
Share on other sites

That's a nice Timex, I nearly wore a Timex today as a matter of fact but plumped for the Omega instead mostly because I have worn that Timex more recently than the Omega. I will probably wear it tomorrow. I seem to have accumulated quite a few Timex models from the 60's, 70's and the 80's. I like Timex watches, the first watch I ever owned as a child was a kids Timex.

 

I have a few Timex watches that work but I need to find crowns and stems for them because they are missing, but once I can locate some I will be able to wear the things. :)

Link to comment
Share on other sites

Another Slava today, but this one has some sentimental value. I bought it new in 1985 while my wife and I were in Poland for two weeks on a choir tour. I picked it up at a jewelers in Poznan for the equivalent of about $16 US. It's always run very nicely, and is pretty accurate. It's hard to tell from the photo, but the hands are a dark gunmetal blue, and the second hand is red.

 

Gryf

 

20151009_082133_zpss4zdvtwy.jpg

Edited by Gryf
Link to comment
Share on other sites

I can see that the second hand is red but would have assumed the others were black but on closer inspection I can just make out that they are blued. Nice watch, blued hands always look nice on white dials.

Link to comment
Share on other sites

Right, the colors on the hands are rather subtle, and only show when the light hits them just right. I just took a pic of the movement of that watch, and am waiting for it to email from my phone. For some reason that takes a Very Long Time.  :-\

 

Gryf

Link to comment
Share on other sites

Sometimes email providers can be slow when exchanging mail or literally in the case of Yahoo, they defer it the first time to make sure it is a real SMTP server that they are accepting mail from rather than an infected computer from a botnet. I just use my own email setup instead because it is faster for me. You could maybe use dropbox or one of the other image hosting sites where yor phone uploads new pictures after you take them and you can either grab them from there or share and link to them. I use dropbox for my phone but there are also other providers that offer a similar free service.

Link to comment
Share on other sites

@Gryf - I got curious about your double barrel question and took a look on google for more info, it seems like a few Slava models have these double barrels. Do a search of google images for "slava double barrels" and quite a few will come up including disassembly instructions.

 

@Geo - I like your Alpina President. :)  1950's?

 

Today I went with a nice looking gold tone Timex, I will have to post a picture of that a little bit later as I am not at my desktop computer currently. I have a Bradley Time - Walt Disney Productions Mickey Mouse watch in pieces at the moment, if I have that back together before tomorrow, it may be my watch of the day. I like Mickey Mouse watches and have a few of them mostly because they are just fun to wear. I also like advertising watches and found a Seiko yesterday with a Pepsi logo as well as a Coca Cola digital watch while sorting through some stuff. I couldn't find a picture on google of any remotely like it so maybe they aren't that common. Does anyone else like advertising watches?

Link to comment
Share on other sites

@Geo - It is always a shame when a pretty movement is hidden isn't it.

 

I have an early 1940's  Elgin A-11 military watch opened up on my desk with a gold toned 539 movement in it, the movement was actually more aesthetically pleasing than I imagined, I hadn't seen pictures of the movement beforehand so was expecting a very generic movement like a Timex, surprisingly it was better than anticipated. The band may even be original but not sure, someone has at some stage replaced the original springbars with sewing pins and bent them over. It looks exactly like THIS picture I found whilst searching for some more information about them. From what I have read so far, it seems that the gold toned movement and that case are the scarcer variant of this watch but would love to get a second opinion on that.

 

Anyway, as promised, here is the Timex.

post-1462-0-31773500-1444471952_thumb.jp

  • Like 1
Link to comment
Share on other sites

@mk3 -

You mentioned your Bradley Time Mickey Mouse watch... I received my first watch when I was in elementary school; I was fascinated by watches even then, and I remember that it was a Bradley. That would have been in the mid-1960s. Wish I still had it.

Gryf

Link to comment
Share on other sites

The Bradley is attached below although it still needs some cosmetic work but it is now happily ticking away and thus far seems to be keeping good time. Maybe you can find the same model Bradley you had for sale somewhere and refurbish it as a project?

 

My first ever watch as a boy was a Timex which is probably why I have a bit of a soft spot for them even now.

post-1462-0-18606800-1444476216_thumb.jp

Edited by mk3
  • Like 2
Link to comment
Share on other sites

I have another 6000 almost identical with grey dial only a slightly earlier model, the outer part of the dial on the earlier model is not as shiny as the WH112-K1, the wife took a liking to it and wears it so I wont ever see that again. The one in the picture has a deployment strap and the one my wife borrowed from me has a regular Tag buckle strap. I do also have yet another 6000 series with a white dial on a stainless steel Tag bracelet, pic attached.

 

Yours has a really nice dial, I should pick up one of those at some stage, I also want to add an automatic as well at some later stage.

post-1462-0-66708600-1444557367_thumb.jp

  • Like 1
Link to comment
Share on other sites

I found a picture of the older one which is just a WH112 I believe. I recently fitted a new battery to it, waterproofed, cleaned and repolished it. I have another couple of Tags but offhand I cannot remember which models they are and they don't see much wear.

post-1462-0-13202500-1444560130_thumb.jp

  • Like 1
Link to comment
Share on other sites

My push was when I sent a Rolex Date with a 3135 movement in to be serviced and it came back with fingerprints on the hands, dial, inside the crystal, the watch wasn't waterproofed properly, the stem would come out, the watch stopped intermittently while on the watch winder before I got it wet whilst swimming or in the hot tub and when I had to open it immediately to dry it I found that the back was only finger tight and noticed black marks on the rotor and figured that the badly splayed gasket that was fitted had been catching on the rotor like a brake, I was right about that. In essence, the watch had no issues before being sent for a service except for a barely noticeable chip in the crystal which they were asked to replace and didn't. I expected my watch to come back looking like new, instead I was horrified that it came back in that state. They also made a total mess of the case polishing, needless to say that I was not pleased and I got my money back and personally took it into the authorized Rolex dealership to be serviced properly.

 

The idiots who messed it up were a largish jewelry chain in our area that are based in Boston, MA. Unfortunately my wife took this in for a service for me as I was busy, I had asked her to take it to the authorized Rolex dealership in town, she thought I meant a jewelry shop in the mall that sell used Rolex watches and look like a Rolex dealer because they have more Rolex ad signs than the real dealer. When I called to complain they insisted their watchmakers were ALL Rolex trained, to which I asked "trained on what, those $5 fakes from China?" What I do know for sure is that at least one of them had no clue what they were doing. Lesson learned.

Link to comment
Share on other sites

When it came back from the Rolex authorized dealer it was great, just like night and day, just a shame it never got there in the first place. I really love the Date model, in fact maybe I will grab one off the watch winder and wear it tomorrow.

Link to comment
Share on other sites

I was going to wear a Date but at the last minute I changed my mind and grabbed this Datejust with computer dial from the watch winder instead mostly because I haven't worn it in a while and it was closer to hand, this one has the solid instead of the hollow center links and the Rolex logo laser etched on the crystal in the 6 o`clock position. The bracelet also has a concealed clasp. I believe I bought this watch new sometime in either 2005 or 2006.

 

I love the weight of this watch, the weight of it always feels reassuring that you are actually wearing a watch. 

 

 

post-1462-0-43807700-1444629359_thumb.jp

post-1462-0-40007900-1444629372_thumb.jp

post-1462-0-02921000-1444629381_thumb.jp

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • Never and others. Yes like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • Hi all, total newbie to watchmaking and I've had a bit of a mishap. Just completing level 2 and was doing ok, but I was just on the last part of the reassembly of my ST3620 when the balance end stone shot across the room, just as I was trying to see if I had put the correct amount of oil between it and the balance end, aarrrgh! Been on my hands and knees combing the carpet for 20mins looking for it but to no avail. Does anybody know where I can get a replacement from and what to look for please?? Thanks.
    • Get someone local to tig it ,very easy fix and should only take a few minutes so probably wouldn’t cost much ,or failing that get it very clean and silver solder it. Dell
    • Hi, The winding pin is not split, well that's how it was when I obtained the watch. The movement is front-loaded and here's a picture of where the case screws are fitted. The face picture is before I dismantled it. Quick update.  I've always had a nylon ring sitting in the parts try that I wasn't sure where it went and left it to the last thing as I know it must be part of the case assembly. Anyway, looking at the picture in my last post you can see, just under the winding stem, a white-looking object, this is the nylon ring 🤭 So, I had to remove the dial again and replace the ring. Once this was all back together I placed the movement in the case and realized my initial problem maybe is not a problem as it looks like I can screw the movement back in the case and then place the hands as the dial is nearly flush with the outside of the case anyway so I'll be able to check for alignment. if all is good then just fit the crystal and bezel 🤔 I can't think of any issues with this approach but please comment if you think I've not thought of something. Another lesson learned as well. Take more pictures not just of the movement parts and location 😅
×
×
  • Create New...