Jump to content

Watch of Today


mk3

Recommended Posts

Not to be confused with "Match of the Day!"

 

So hi, I'm new here and noticed that there is not a watch of the day thread, so I figured that I would start one.

 

I'm sure that many of you wear different watches that have just been worked on, acquired or whatever. I tend to wear a watch on my left wrist for a while, whereas I find myself more frequently wearing a watch on the right too that I am testing or just because it appeals to me that day. How many of you do similar and how about posting pictures of the watch of the day, week or whatever?

 

I will start it off with todays pick which is a very humble and slightly the worse for wear 1970's LCD Texas Instruments Quartz watch with super high quality plastic bezel, OK not so high a quality but still a fun simple watch with Time in hours and mins, push for seconds and date.

 

Best Wishes

 

 

 

 

  • Like 2
Link to comment
Share on other sites

A remote link to the likes of Photobucket would be one way.

You should be able to select a photo from your computer using the "Choose file" button. Then press the "Attach this file" button and a bar will appear indicating that the file is ready to be inserted. Finally press the "Add to post" button to insert the image into the post.

The image will be dropped where the cursor is in the text, so first ensure you place the cursor where you want the image to show.

post-124-0-55730400-1444121456_thumb.png

Remember to check the preview to make sure it is the way you want it before posting as there is a time limit place on editing.

Link to comment
Share on other sites

Yes I figured it out thanks as the attach option was hidden in the "More Options" section. I'm not used to this particular forum software but will soon get used to it.

 

I'm interested in more or less all kinds of watches, mostly mechanical analog watches but the 1970's LED and LCD watches are kind of fun too which was why I chose to wear that one yesterday. I was never a fan of them at the time but have grown to like them more over the years. You don't see many of them around anymore, especially on someone's wrist! and so it seemed appropriate to wear it.

 

As it is now a new day, a new watch was called for and the pick of te day is a slightly tidier retro Jules Jurgenson Quartz watch.

 

 

post-1462-0-32296100-1444122785_thumb.jp

  • Like 4
Link to comment
Share on other sites

As a side note this topic HERE states there is a 2mb upload limit on attachments, the original I attempted to upload was 2.5mb or so and would have been the reason it didn't attach. When I click to attach it states max file upload size is 200mb which disagrees with what it is actually set at and in fact the screenshot posted above shows a 1gb upload limit which again seems to be at odds with actuality. Maybe someone got kilobytes and megabytes mixed up in the site upload settings options in the admin panel?

 

I was unable to point this out in the linked thread above as the topic is locked. :(

Link to comment
Share on other sites

So today I opted for a salvage job, I've had a 1971 Mohamed Ali Depraz watch kicking around for ages that was missing the dial when I got it so I have just fitted a generic dial and re-cased it. It might now be a Frankenwatch but better than just sat in a plastic storage box awaiting a part that I am probably not going to come across anyway, I think I much prefer the generic dial to the original anyway and at least it is now wearable.

 

post-1462-0-88913300-1444209910.jpg

 

Above is what it would have looked like when it started life in 1971 and further below is what it looks like now.

 

post-1462-0-40216700-1444209922_thumb.jp

 

post-1462-0-65833200-1444209935_thumb.jp

  • Like 1
Link to comment
Share on other sites

Wore the Shturmanskie today - a Poljot chronograph that I've owned since it was new. It's showing some wear now, mainly the missing chrono reset stud and not much chrome left on the crown. If anybody can suggest a source for Poljot parts, I'd be grateful! I think Mark recently posted a teardown of this movement.

 

Gryf

 

0PLgBqW.jpg

  • Like 3
Link to comment
Share on other sites

So a new day is upon us and today is the day for something a little different. Today I chose a Dynasty Jump hour watch, I think these are possibly the manual forerunner to quartz digital watches.

 

 

 

 

post-1462-0-39095800-1444279968_thumb.jp

  • Like 4
Link to comment
Share on other sites

Hi Gryf - it might be worth looking at eBay watch sellers in places like the Ukraine and Bulgaria. Some of these people sell what may or may not be "franken" watches, but it's posible they are more likely to have access to Poljot parts because of that.

 

Worth a look, perhaps.

 

Cheers,

 

Will

Link to comment
Share on other sites

There are some NOS pushers on ebay from Bulgaria for $14.99 + $4.99 shipping to the USA.

 

Search for NOS two 2 Pushers POLJOT 3133 SHTURMANSKIE, Okean Chronograph 1-MWf

 

Hope that helps.

Link to comment
Share on other sites

mk3 - thanks again for the eBay reference! Thanks to Buy It Now, I should have a couple of pushers winging my way from Bulgaria shortly.

 

Today's pic is my Slava with day/date calendar. This watch, plus the Sekonda pictured above, were ordered from Ukraine via this vendor on Etsy. He has some interesting stuff, if you're into Russian watches, and his prices are pretty reasonable.

 

Gryf

 

DSC_1994_zps08mksqhr.jpg

Edited by Gryf
  • Like 1
Link to comment
Share on other sites

@Gryf - You are welcome, I sent you a PM with the link for a NOS crown for your watch which is $7 + $4.99 shipping from Bulgaria, maybe even from the same seller. Not sure what the protocol is on posting non-permanent links. That should give you what you need to address the issues with your watch that you wanted to take care of. I hope this helps.

Link to comment
Share on other sites

Happy Friday....!

 

Wearing my Ruhla UMF ...or is it UMF Ruhla? or even VEB Uhren und Maschinenfabrik Ruhla..

 

Anyway a nice honest little watch but will probably swap out with something a bit more robust for the weekend.

 

Anilv

 

 

post-211-0-35192200-1444356265_thumb.jpg

post-211-0-30946800-1444356279_thumb.jpg

post-211-0-57187100-1444356289_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Hi Mk3,  I am going back to yesterday! Love your Jump Hour Watch, really nice example. After a recent trip to New York, I have in my head a little watch project for a "New York Watch" for myself, which I might base on a jump hour

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw Darwin’s theory of evolution has not been proven to be absolutely.  😀 
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
    • Hi.  I would like to take issue here regarding battery driven , watches, clocks,etc. I will and do repair these clocks in fact I have sever al in my collection as well as the regular mechanical ones. I have one on my mantle piece over 60 years old tha belonged to my wife’s Aunt,  long gone Iam afraid and it has been cleaned etc and never missed a beat and is accurate. Every one has their preduices as regards Electrical /electronic Horology but I regard it as part of the progress time line of the art of Horology and to be treated as such. Like Darwin’s theory of evolution it evolved.  Two cavemen knocking rocks together and a shard broke off , looking at it he worked out if it was stuck on the end of a stick he would have a spear. Likewise his pal seeing what he was up to picked up a piece  and did the same, now that’s evolution. Some clockmaker decided to build a clock that ran with a battery and no spring to wind up and break, progress and both the mechanical and battery driven clocks evolved, the battery ones got better to the point that if it broke you changed the complete unit. Likewise watches did the same but both can be repaired by people who approach Horology with an open mind without preduice.  We all have our likes and dislikes bu I for one would never dismiss any technology because I don’t like it.   The mobile phone is a good example of modern technology at work as is the automotive industry. There buttons and switches in my car I don’t use because to me they are not nesessary but I still drive the car.
    • I haven't gone through all the reading of what it might be or not. The first thing I would do if nothing obvious stands out is replace the mainspring, you have to start at the source of the power. Nine times out of ten that is the problem.  
    • Haha. You're just in a wicked mood today John 😅
×
×
  • Create New...