Jump to content

Watch of Today


mk3

Recommended Posts

Sometimes you are the windshield! I have been anticipating this lot coming in. No pictures of the movement, but the dial looked good. When it arrived, it was better that I could have imagined! Only missing the seconds  hand, winding stem and crown. But everything else original. I opened the back and was not disappointed...ETA 1256. According the Ranftt, first ETA automatic (Etarotor). As I gazed in wide wonder, I used a piece of pegwood to move the rotor from covering the balance. It was beating and strong!! It stopped shortly after but got it to go again.  Hopefully a servicing will be all this needs...1160576936_DSCN51602.thumb.JPG.b0460f4cae5a1d72c7c35def37b93242.JPG432054143_DSCN51582.thumb.JPG.c9e9a92c90b0bcb9987ac767031adcc5.JPG

  • Like 5
  • Thanks 1
Link to comment
Share on other sites

2 hours ago, Razz said:

Sometimes you are the windshield! I have been anticipating this lot coming in. No pictures of the movement, but the dial looked good. When it arrived, it was better that I could have imagined! Only missing the seconds  hand, winding stem and crown. But everything else original. I opened the back and was not disappointed...ETA 1256. According the Ranftt, first ETA automatic (Etarotor). As I gazed in wide wonder, I used a piece of pegwood to move the rotor from covering the balance. It was beating and strong!! It stopped shortly after but got it to go again.  Hopefully a servicing will be all this needs...1160576936_DSCN51602.thumb.JPG.b0460f4cae5a1d72c7c35def37b93242.JPG432054143_DSCN51582.thumb.JPG.c9e9a92c90b0bcb9987ac767031adcc5.JPG

Very nice inside.  Grenchen 🤔, origin of the Kurth brothers  . KF , KFG , Certina and the rarest Dirty Dozen the Grana. 

Link to comment
Share on other sites

1 hour ago, Neverenoughwatches said:

Very nice inside.  Grenchen 🤔, origin of the Kurth brothers  . KF , KFG , Certina and the rarest Dirty Dozen the Grana. 

A bit of history as well, when they stamp the now common knowledge of removing the 3 A screws to remove the automatic module, before they called it a module!!

Link to comment
Share on other sites

  • 2 weeks later...

I just finished another Seiko 6309 diver over the weekend and finished it off last night, see before and after shots 🙂

Front:

773349845_6309diverfront.thumb.jpeg.1239bc053101540cf015f0781bad30a5.jpeg

Tape was the only thing holding it together, here is the back of the case:

1992775041_6309diverback.thumb.jpeg.5bb312b93602d66fba2c459c7aaa44f3.jpeg

And here is the view when I opened the case 😱:

841366122_6309diverinside.thumb.jpeg.b5d9206275a74ee4da2bc19fc5d19786.jpeg

And when I got the movement out:

1459763183_6309divermvmt.thumb.jpeg.f2e714f93a4ee25dad38fadbf6b0294d.jpeg

The hands were completely fused to the cannon pinion and the dial paint eaten through to bare metal 😭

1788773536_6309diverDialandhands.thumb.jpeg.43ef6d81f8b7391359bc4ab70386ed88.jpeg

After cleaning in my 'home-brew' 566 and rinse solutions (please see my other thread, HERE) and then polishing the glass and case, then replacing the dial and hands with aftermarket replacements and a new cannon pinion from a donor watch along with a new bezel (because I had a spare so why not), here is the final result:

2029643848_Finished6309diver.thumb.jpeg.ef3c0c4eb01e3097e4196a039478a06c.jpeg698524899_6309diverfront2.thumb.jpeg.9b0884040dcee79ca313c4be2a471e7e.jpeg

Very pleased with the result

Edited by Waggy
  • Like 9
  • Thanks 2
Link to comment
Share on other sites

Just spotted an issue with this watch - looks like the day (not date which is working fine) is not jumping correctly and ends up misaligned after midnight - on manual change there is no 'snap' into place of the day either, so I assume it is misaligned of the spring is not engaging correctly on the day disc??? So near and yet so far 🤪

Will open the watch up and try to fix it... stay tuned 🙂

 

  • Like 1
Link to comment
Share on other sites

Another Croton automatic ETA 1256 in beautiful shape. Runs well added a temporary strap and pegged most of the DNA off the case. Crystal has a Crack but that is not the original one as this movement was only produced for 5 years ('50 to '54). The dial is pretty awesome. I like the tick marks between the minute makers. 5 minutes on the timegrapher got it close, but this will be a future project to see what kind of amplitude we can reach, clean the case and replace the crystal. 1839002004_DSCN51742.thumb.JPG.4f1bf85eb1b3cf474e5da7f4fb4083af.JPG1885584713_DSCN51752.thumb.JPG.2aa3ad927006e06dff3e3810f2b6994a.JPG1269456823_DSCN51762.thumb.JPG.6e133911eab518afba01789b480f8190.JPG1420435892_20230412_1526262.thumb.jpg.976ce860b186ccc16ab72ed821e444e6.jpg

  • Like 4
Link to comment
Share on other sites

On 4/12/2023 at 10:39 AM, Waggy said:

Just spotted an issue with this watch - looks like the day (not date which is working fine) is not jumping correctly and ends up misaligned after midnight - on manual change there is no 'snap' into place of the day either, so I assume it is misaligned of the spring is not engaging correctly on the day disc??? So near and yet so far 🤪

Will open the watch up and try to fix it... stay tuned 🙂

 

Fixed 😃

  • Like 3
Link to comment
Share on other sites

Just picked up this very cool Oberon jump hour from a seller in Bulgaria. It sets, but doesn't run or wind. Looks like a 21-jewel pin pallet movement from the eBay pictures. It just arrived at my work so I haven't opened it yet.

Pictured here with one of my favorite daily wears.

20230417_113334.thumb.jpg.58bcfcbad3975067e4d98fdab6e900f0.jpg20230417_113344.thumb.jpg.ac6ed6925f1ca543b66dd42def8b1356.jpg

  • Like 7
Link to comment
Share on other sites

1 hour ago, ManSkirtBrew said:

Just picked up this very cool Oberon jump hour from a seller in Bulgaria. It sets, but doesn't run or wind. Looks like a 21-jewel pin pallet movement from the eBay pictures. It just arrived at my work so I haven't opened it yet.

Pictured here with one of my favorite daily wears.

20230417_113334.thumb.jpg.58bcfcbad3975067e4d98fdab6e900f0.jpg20230417_113344.thumb.jpg.ac6ed6925f1ca543b66dd42def8b1356.jpg

It will be interesting to see. 

  • Like 1
Link to comment
Share on other sites

Picked up this Croton Tropartic with the blue dial yesterday. I posted it in the blue dial thread. Since then I took it out of the case and examined more closely. I now think that the gold flecking on the blue linen dial is original...it does not affect the white of the minutes/seconds markers, which actually are on top of some of the gold. Anyway several more pictures in various lighting trying to show the nice contrast between the red seconds hand and the blue dial. I dont think this had been opened in quite a while as the case back was really tightened down and gasket was hardened but easy to chip out compared to the goo of the crown gasket. Definately will be getting a new crystal.266127288_DSCN51902.thumb.JPG.4312363dccd5e9fca567c614da226fe0.JPG556269226_DSCN51892.thumb.JPG.cdd5b9c363ed5ce5cfc991ac4bb21d0e.JPG293132246_DSCN51912.thumb.JPG.b45503baef1675f29540ec17b7fc77ec.JPG1452315321_DSCN51922.thumb.JPG.097ca5a1ccd0494d79e7bc07b7b08ae9.JPG1791939702_DSCN51932.thumb.JPG.e0ba64bfac53dc7cdecfdaacf361439f.JPG279440484_DSCN51942.thumb.JPG.b0fece47e079a7a63d737cdb68085c88.JPG299396288_20230423_1540352.thumb.jpg.84b7f8da0eb4b82d10bd8baf7123db57.jpg

Edited by Razz
Typos
  • Like 6
Link to comment
Share on other sites

This Croton Aquadatic has an ETA 1258 that was only manufactured from '53 to '55. Paired with a Speidel with a patent date of 1952, I think the wavy lines of the links and curve of the spring bar covers are a perfect match. The case back screws and the profile of this watch are beautiful! Has a case back gasket of an unusual shape with holes for the screws, tough to get a replacement I would think. Looks good on a Hamilton alligator grain over calf as well, but somehow I like the flex bracelet a tad more at the moment. The dial has a few spots but over has a nice patina as well.

343548138_DSCN51972.thumb.JPG.d95cfb08d6b908b69408a474e29da4e9.JPG767518363_DSCN51992.thumb.JPG.f3880276d6321c2053c3752fd2c21b9b.JPG1315641029_DSCN52042.thumb.JPG.d667cbc6818a2c4a207aaf7e55425973.JPG1088574809_DSCN52052.thumb.JPG.9d67564e33e8c7ba22d0e57dcc99146a.JPG413907409_DSCN52002.thumb.JPG.c3d1e1c5bf5d3446b02b67e0b4b779a9.JPG1270934572_DSCN52012.thumb.JPG.4a6afee46180b42d28c0154459ed2d58.JPG204449699_20230427_2207012.thumb.jpg.4304e63ff90353bc4218e4365ce52e9f.jpg1395260636_20230427_2216172.thumb.jpg.f17bfa593bc7d8364d3042b799bb4ecf.jpg1828307551_DSCN52022.thumb.JPG.8944e8a7f1cb0cb0dcc71bdc404086f8.JPG998665354_DSCN52032.thumb.JPG.7f3fd30ecd4177e7c86274a8ad7ac009.JPG

  • Like 4
Link to comment
Share on other sites

Here is my watch of today - I made it myself from all new parts, I think I may switch out the hands to ones with white lume as the plain silver doesn't show up very well at night (see below and tell me what you think), ie the black polish on the hands is black most of the time (see minute hand below) unless it catches the light and turns white (see hour hand in picture below) which is the only time you can see it on the busy backdrop of the dark skeleton movement. 

660666424_Wag1.thumb.jpeg.94ceca5a0d754127a4c7fd5eb6213cb7.jpeg

 

It's a Seiko NH72A skeleton movement and an 'Ali Express special' strap/case, here are the hands I am thinking of switching to with white lume and red seconds hand.....opinions:

 

image.png.657a722c74f6e769b302c462575eb94a.png

  • Like 2
Link to comment
Share on other sites

...are you bored of my Crickets yet? 😅 One more today. This one was in rough shape with many missing parts. I bought a donor and debated about which watch should be the runner but here it is. Maybe not my best work but when I snapped it closed the beat was less than 1.5, a few seconds fast DU/DD and for an unadjusted cal 120 the positions were all pretty close though the nine o'clock is a bit heavy. It just didn't seem worthwhile to wrestle with it. I also discovered the alarm is much louder than usual. Perhaps something to do with the friction fit membrane gong plate instead of the typical case screw/gong plate set up. Haven't seen that before...

IMG_1513.jpeg

IMG_1502.jpeg

Edited by rehajm
  • Like 3
Link to comment
Share on other sites

My first wrist check here. Thanks for having me. I was wearing two watches today to go meet another collector. We had a fun time talking watches. Don’t mind the time on the Elgin. I didn’t set it. 
IMG_5849.thumb.jpeg.9aad872ee626a19704cdf691c07b440d.jpegIMG_5852.thumb.jpeg.c497caadb52da1a9a1474aef296604d2.jpeg

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...