Jump to content

Watch of Today


mk3

Recommended Posts

Avia Matic - FHF 905 with an interesting patina and a strange reflection from the magnifier  I was taking the picture with, just in case you thought I had turned into some weird cyborg with LEDs under my skin.

RIMG0175.JPG

Edited by AndyHull
  • Like 5
Link to comment
Share on other sites

  • 2 weeks later...

RIMG0580.thumb.JPG.6fab52262251b2db0db7122845f47a69.JPG

The Elektronika 5 / Электроника 5 USSR era LCD quartz made it to the bench today.


It was pretty scruffy inside, and had two grubby and one missing contacts on the module.

RIMG0576.thumb.JPG.e5bc685476e580aae813aeadb8d32dcb.JPG

I fabricate the missing contact from a flattened piece of copper wire, tinned with solder, and soldered it in place on the module, and cleaned up the rest as best I could.

Once re-assembled it seems to work fine, though I have yet to figure out how to set the month. The time and day number are obvious, but there must be a trick to setting the month.

RIMG0586.thumb.JPG.f008644caf66b6f549ff21c5068c503e.JPG

I also got the backlight working, and it looks to be about as efficient as the one on an original Casio F-91W

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I'm sporting a  clean and simple design 404 club Timex Automatic today.

RIMG0721.thumb.JPG.7827d7a920fdb8b765c123bd904b91fc.JPG

Probably early to mid eighties, it scrubbed up almost completely blemish free, and is sporting a brand new (well new old stock) similarly simple plain black Apollo leather band. 

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

RIMG0885.thumb.JPG.e64c62c76c7e77104ab7ee3803549069.JPG

Today I decided to give my 1969 Timex Marlin an airing.

To put this in context, on July 21st that year,  Neil Armstrong took his first historic steps on the surface of the moon. Apparently he wasn't actually wearing his Omega Speedmaster at that point as he had left it in the lunar module.

image.thumb.png.0c2c0cdb522fe683c0fb3ea270926cac.png

 

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Bulova Seaking Automatic from 1975 I believe. Just restored and serviced this for my next door neighbour. It's 'on test' for the next day. He told me he got it for his tenth wedding anniversary and has been in a drawer for 25 years or so. Going to give it back to him tomorrow evening. I hope he will be pleased to wear it again. 

IMG_20210922_212024810~2.jpg

  • Like 7
Link to comment
Share on other sites

  • 3 weeks later...

I haven't done one of these for a while.....

20211012_121523.thumb.jpg.70431bb4f7586a5c1e9d648cd2792d98.jpg

My latest acquisition with a Record 107 movement, and on my first attempt at making a strap (no apologies for the dodgy stitching).

Came in as a non-runner, turned out to be a broken M/S so easily sorted. I was tempted to have a go at re-plating the case but I think it carries off the brassing rather well.

  • Like 7
Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...
8 hours ago, GomBoo said:

One of two two Native American Watch Cuffs I have in the collection...😘

0064C476-AAB6-41CD-84D9-EBF5863BD507_1_105_c.jpeg

 

B1E60A7D-FA89-4189-BE7B-D6898BE98D4E_1_201_a.jpeg

These are well crafted...ahere

 

11 hours ago, GomBoo said:

Zuni Apache Crown Dancer...With an Indiglo attached.😏5BBE1E0F-397B-4357-A53C-66B48D6A6F73_1_201_a.thumb.jpeg.28a6686c2f13db9044b59a1e764add88.jpeg

F4B8B3C2-9D6E-40B9-BED9-085C32F3D4CF_1_201_a.jpeg

The craftsmanship is exceptional.

J

  • Like 1
Link to comment
Share on other sites

The above is an Ithaca Peak Turquoise Watch Cuff by Navajo silversmith Jerry Roan from Alltribes in Arizona. 

The other is also from Alltribes.  Vintage Zuni Apache Crown Dancer watch Cuff by Panteah 

If interested call & ask for Marilyn.

They have both vintage & new items.

 Roan was Vintage, Panteah is newer.

Edited by GomBoo
Link to comment
Share on other sites

There is a lot of skill in silversmithing. My dad did a little bit when I was younger, and I can tell that there a w whole heap of artistry and work in those watch cuffs. Very impressive. 

It may seem like a strange question, but is the silver mined locally. I ask, because I've recently been binge watching a bunch of mine exploration videos, including some silver mines in the Arizona area and the southern USA.


https://www.youtube.com/channel/UCU7kKUhwDj8jTbJHI8GL21A
https://www.youtube.com/channel/UCdg1JMTJWcmQI17SOylAxIg/featured

https://www.youtube.com/c/GhostTownLiving/featured

It was a pretty tough life as a miner back in the day. Actually come to think on it, it still is a pretty tough life.
 

Edited by AndyHull
Link to comment
Share on other sites

Most all of my Vintage items are made with coin silver. The Native Americans had little choice where it came from and used it right from the beginning of trading with the 'newcomers'.

The Jewelry is beautiful, craftsmanship outstanding and Alltribes is owned and operated by the original inhabitants of our great Country...my way of saying 'we should have dome better'.

 

 

1847979532_ScreenShot2021-12-20at7_19_48PM.thumb.png.af8438de62ac38a1cf0e7144bb7d127f.png

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think if you want to play Billy big b.ollocks then you have to have something up your sleeve, anyone that knows how to fight, plays dirty. Lets face it a lot of folk that voted for Brexit just rolled uk their sleeves to say up yours EU hoping for good changes. We have idiots for leaders and probably none of them clever enough to clean the shitty stick they were given. I didnt vote, what will be will be.
    • I voted leave too, my reasoning was the the EU is undemocratic, no elected officials. I don't regret it but I  am sad that both sides acted like petulant toddlers.  Shameful.  I'm not on other forums but if I was and left this site, would you shun me? Of course not, we aren't petulant toddlers.  
    • This is a type of tool that may be suitable to remove the bezel - though note that I'm pretty sure the watch should be face down - not face up, as in some of the photos of these tools on amazon & ebay! If you try one one of those, put the movement screws back in first to avoid accidents. https://www.amazon.co.uk/Removal-Professional-Remover-Watchmaker-Diameter/dp/B09XCH4QVN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A296NCMMFVXSDN&th=1  
    • Hi, I’m constantly asking my wife to help me with removing the stem in order to complete casing. To expand, this is not a challenge for me when the setting lever is secured by a screw (older calibers). However when the setting lever is attached to a spring loaded setting lever axel, like on more modern calibers, I simply don’t see how to apply enough pressure on the button to get the stem out short of putting the movement face down with the dial and hands attached, which I’m loath to do in order to avoid damaging the dial/hands? what technique should I be using? thanks  
    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
×
×
  • Create New...