Jump to content

Watch of Today


mk3

Recommended Posts

16 hours ago, SeikoWatch said:

Nice Westclox but i'm not sure if this watch is made or powered by Seiko . Anyway , i've never known or heard it .

Westclox is an American  budget  brand. They once made their own movements  ,but later purchased them from outside vendors. Among  them Seiko and Jeambrun .Image search the westclox A 201 movement. You will find a seiko 66 variant produced for sale to non seiko assemblers. 

Edited by yankeedog
Link to comment
Share on other sites

26 minutes ago, yankeedog said:

Westclox is an American  budget  brand. They once made their own movements  ,but later purchased them from outside vendors. Among  them Seiko and Jeambrun .Image search the westclox A 201 movement. You will find a seiko 66 variant produced for sale to non seiko assemblers. 

Thanks for the info. I assumed that most Westclox were simple and slightly crude pin levers. I'll keep an eye out for jeweled versions.

Link to comment
Share on other sites

RIMG0395.thumb.JPG.e183e53d4e183384fd70a128c68c5a5f.JPG

The HMT Rajat has come with us to the land of its birth.

GI_14.jpg

If you are ever in the south of India, you might want to make a trip to the HMT museum.

https://www.thehindu.com/society/janata-watches-and-braille-timepieces-a-visit-to-hmts-new-museum-in-bengaluru/article29109045.ece

If I had known about it last year when I was down there, I would have gone.

http://www.hmtmuseum.in/

Edited by AndyHull
  • Like 3
Link to comment
Share on other sites

Just finished the overhaul of my Rego Chronostop pin pallet.  It has a single jewel, Lapanouse movement.  Had to fit a new crystal as the replacement that was on it didn't clear the second hand and was stalling the movement. The dial is perfect for a watch this old.  It is officially the LOUDEST ticking watch I own! :wacko: I kept the old ratty leather band,  it kinda adds to the charm.  I kind of feel like those old Remington shaver commercials,  where Victor Kiam liked the their razors so much that he bought the company.... well,  I just bought another one of these on eBay.:D

20200117_082541.jpg

  • Like 2
Link to comment
Share on other sites

1 hour ago, AndyHull said:

RIMG0395.thumb.JPG.e183e53d4e183384fd70a128c68c5a5f.JPG

The HMT Rajat has come with us to the land of its birth.

GI_14.jpg

If you are ever in the south of India, you might want to make a trip to the HMT museum.

https://www.thehindu.com/society/janata-watches-and-braille-timepieces-a-visit-to-hmts-new-museum-in-bengaluru/article29109045.ece

If I had known about it last year when I was down there, I would have gone.

http://www.hmtmuseum.in/

Can you purchase watches on site? 

Link to comment
Share on other sites

40 minutes ago, FLwatchguy73 said:

Can you purchase watches on site? 

I believe so. According to what I read on line, you can. You can also still purchase some models through their web site.


https://www.hmtwatches.in/

If I get a chance, I'm going to see if any of the local shops here in Dehradun still have any new old stock, but I some how doubt it.

https://www.hmtwatches.in/9/products/eco-friend-automatic.htm

The stock changes from time to time, so keep checking the site if there is something in particular you are looking for.

Link to comment
Share on other sites

I figure today I'd wear my newly acquired Vintage Timex Viscount from 1958. All it needed mechanically was to refit the auto wind mechanism that had become detached from the movement.  It's keeping fantastic time for a 62 year old "disposable" watch. I still need to polish the scratches out of the crystal and replace the ugly expansion bracelet.15794466035116614614607435832057.thumb.jpg.b8c4dbab0b6786a7157793cb166ecdef.jpg

20200119_003204.thumb.jpg.f3897fd9d5912fef375b3d972f95ce1f.jpg

  • Like 3
Link to comment
Share on other sites

2 hours ago, yankeedog said:

I take it the sub dials are for show.

They actually work. But not like a traditional chronograph.  The upper sub displays minutes, 45 in total. The bottom dial displays hours up to 6 total. When you pull out the crown to set the time, the sub dial hands move in unison with the main hands. The two pushers stop and start the seconds hand,  while the rest of the movement continues to run.  Im attaching a video illustrating that. 

  • Like 2
Link to comment
Share on other sites

23 hours ago, Graziano said:

It's dark over here

Nice and sunny here.

RIMG0410.thumb.JPG.0b98ae4ef6c95e489c22a3b2d18bd596.JPG

The grapefruit and lemons are loving it. This is just a little one, some of the one high up in the tree are easily three times this size. 

The USSR era Sekonda (and the USSR era chap wearing it) are also enjoying the sunshine. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well I put the spa on Gumtree (selling service) to try and sell it as it only needs a recirc pump to get it going. However, it weighs circa 250kg, so there's 4 fairly strong guys, and I would have to remove the sliding door in the room completely to be able to get it out, as well as clearing out a multitude of potted plants and the Alfresco outdoor setting to be able to get it out. Then move nearly everything in the back of the garage to be able to push it through to the front of the house. I would also need to hire furniture skates to be able to shift it around as carrying it is out of the question. Then someone would need a trailer to get it to their place as you won't get it on the back of a ute. So, the only answer is, out with the reciprocating saw and cut it all up into manageable pieces. Crying shame as it is in really good nick. I was only asking $1,500 and only got two bites, but it would only take something to go wrong with removing the sliding door etc that everything I make on the sale could go out the door on repairs etc. It would have been nice to be able to turn it into tools etc, but que sera sera. I don't know about the rest of the world, but there just seems to be very little interest from people wanting to buy things secondhand.  
    • I would like to see the movement. The watch is the movement. Anyone can print a name on a dial and sell it as "the maker".
    • Thanks for your answers! There seems to be a contradiction between these two answers, so perhaps I need to clarify. The flat and convex jewels look identical on the side facing away from the pivot shoulder. That is, there is an oil reservoir. I don't know if that changes anything but I thought it was safest to clarify since I didn't include a picture of the jewels from the opposite side.
    • unfortunately paying attention to details bumps up the cost. Which is why they shortchange on manufacturing steps if they can.
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  When it comes to tools buy the best you can afford a good set of watch makers screwdrivers if you look after them will last you a life time. I recommend Dumont tweezers Number 3 and number 5 for fine work, you can build up from there. You will need different strength eye glasses. Some now like to work using a microscope. Pliers the box jointed ones are best they don't go out of line.     
×
×
  • Create New...