Jump to content

Watch of Today


mk3

Recommended Posts

A relic of the Jewel Wars, this 35mm 1950s Mount Royal with an 80 jewels (kind of) Felsa 4002, 21 of which are broadly functional and 59 which, er, aren’t. I’ve no idea how many of these watches survive today or, indeed, were ever made but it “coulda been a contender” until the likes of Waltham, Orient, and Titoni climbed into the ring with their 100 (and more) jewelled efforts.

Of the two recorded makers of a Mount Royal brand, Choisi seems to be the most likely candidate for today’s curiosity, it being a product of the original company founded in 1929 before its demise, date unknown. The company name was seemingly reactivated in 2013 by a Singapore-owned  enterprise which, from what I can see, is largely producing retro-style watches along with homages based on the old company’s vintage models. 

Regards.

Mount Royal RLT.JPG

Mount Royal 80j Felsa 4002.JPG

Mount Royal jewels layout.jpg

  • Like 2
Link to comment
Share on other sites

I see it says "T Swiss - LIC ATO"

The ATO patented movement is about as simple as these things get. At its most basic, it only uses one transistor. This may not make for the most stable oscillator, design but in this use case, they are actually relatively good, since they rely on a fairly conventional mechanical balance to control the oscillator frequency, rather than an R/C circuit, which would typically be less stable over the working temperature range.

 

ATOschematic.gif

(schematic shamelessly stolen from https://www.bmumford.com/tmp/ATOschematic.gif )

This AC125 germanium transistor version is probably the most simplified schematic, but often in reality there are current limiting resistors and other little tweaks.

Since they have no mechanical switched contacts, they don't suffer from burn through or oxidation failures of the contact.

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

37.5mm Swiss-made Stuag, wears very flat and runs on a 17j ETA 900. Probably late ‘40s.

Attributed to one of the few female (is that term still allowed these days?) -led watch manufacturers, Mlle Mireille Grebler (later Mme Mireille Franz-Grebler) who also came to control Cauny, before that particular brand became Spanish owned sometime in the 1970s.

Regards.

Stuag 2018.JPG

Stuag ETA 900 2018.JPG

  • Like 2
Link to comment
Share on other sites

Yesterday's eBay deliveries.

A nice pin pallet that's the cleanest I've ever seen, came with the pallet fork loose, refitted and ticking away, will get a service and back onto eBay at some point.

Then an 'interesting' Seiko franken.

Lovely clean 7019A movement, (which was the reason for the purchase) bonus of new strap, practise dial to strip and make a dial from and hands.

2019-06-23 11.55.38.jpg

2019-06-23 11.55.54.jpg

2019-06-23 11.56.10.jpg

  • Like 1
Link to comment
Share on other sites

My second of this VEC brand and driven by a 15j Cupillard 233, the other one running on a 17J Lorsa P72. Brand name registered in 1932 by SR Ltd Etablissements of Marseilles, the city from where I bought this one, so no doubting its French Connection.

I’ll get my coat.

VEC 2 after.JPG

VEC 2 mvmt after.JPG

Link to comment
Share on other sites

Fero ??? Have just bought this because I like the face ! Never heard of this watch and it is a none runner. Any information would be much appreciated. Cost £28.54 Inc postage so wasn't too painful. Not sure if it's franken or worth its price? 

s-l1600 (4).jpg

s-l1600 (5).jpg

  • Like 1
Link to comment
Share on other sites

18 hours ago, AndyHull said:

Sure.

The Rodeo is here ->

RIMG0499.JPG

 

The "Li Jac" is here ->

 

RIMG0230.JPG

Both have remarkably similar movements. The "Li jac" is a simpler un-jeweled version, the "Rodeo" is jeweled.

 

 

Blimey, I see what you mean.

What you've got there would appear to be two French-made Framelac pin-levers, a movement maker about which very little seems to be recorded. I've attached an image from the Uhrforum.de of the jewelled-lever FR 304 for comparison of the bridge configuration (similar) and the shape of the balance cock (identical). 

Framlec FR 304 mvmt.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes, it looks like GT Revue 30. Doctor, You can not replace escape wheel by the dimensions You listed. One needs to know much more things like number of leaves of the pinion and it's diameter, the position in high of the table and the pinion, the hight between the pivots, the exact pivots diameter... And then, even if suitable wheel is found, one will need to know how to adjust the pallets position correctly. Restoring antique movements is something different than replacing parts. In older movements parts are not interchangeable, this means spare parts do not exist. Here the case is different, but still escapement adjustment will be needed if a wheel from a donor is found. So may be it will be easier to restore the donor for You...Restoring antique movements usually means making of the parts needed and this requires knowlage and working on lathes skill. In this case repivoting of the wheel is the natural solution, but there is a long way that one must walk untill getting ready for such work.
    • I was looking at Essence of Renata, a chemical used a lot for cleaning hairsprings: "Specially prepared solution for degreasing watch and instrument components. Indispensable for degreasing hairsprings." Looking at the MSDS you can see this is just pure n-Heptane, so could be an option for those who don't want to use the chlorocarbons or hexane?     HF6013 - Horological Essence COSHH Safety Data Sheet Horological Essence_0.pdf
    • Welcome from a fellow Seiko enthusiast, there are lots of us on this forum.
    • Nickelsilver is right, movement diameter and keyless works ‘fingerprint’ are important for identifying movements. That said, this appears to be a 7 jewel version of the a Revue 30 movement.  A quick search with google turns up parts movements, and individual parts should be quite easy to come by.  Hope that helps, Mark
×
×
  • Create New...