Jump to content

Watch of Today


mk3

Recommended Posts

A relic of the Jewel Wars, this 35mm 1950s Mount Royal with an 80 jewels (kind of) Felsa 4002, 21 of which are broadly functional and 59 which, er, aren’t. I’ve no idea how many of these watches survive today or, indeed, were ever made but it “coulda been a contender” until the likes of Waltham, Orient, and Titoni climbed into the ring with their 100 (and more) jewelled efforts.

Of the two recorded makers of a Mount Royal brand, Choisi seems to be the most likely candidate for today’s curiosity, it being a product of the original company founded in 1929 before its demise, date unknown. The company name was seemingly reactivated in 2013 by a Singapore-owned  enterprise which, from what I can see, is largely producing retro-style watches along with homages based on the old company’s vintage models. 

Regards.

Mount Royal RLT.JPG

Mount Royal 80j Felsa 4002.JPG

Mount Royal jewels layout.jpg

  • Like 2
Link to comment
Share on other sites

I see it says "T Swiss - LIC ATO"

The ATO patented movement is about as simple as these things get. At its most basic, it only uses one transistor. This may not make for the most stable oscillator, design but in this use case, they are actually relatively good, since they rely on a fairly conventional mechanical balance to control the oscillator frequency, rather than an R/C circuit, which would typically be less stable over the working temperature range.

 

ATOschematic.gif

(schematic shamelessly stolen from https://www.bmumford.com/tmp/ATOschematic.gif )

This AC125 germanium transistor version is probably the most simplified schematic, but often in reality there are current limiting resistors and other little tweaks.

Since they have no mechanical switched contacts, they don't suffer from burn through or oxidation failures of the contact.

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

37.5mm Swiss-made Stuag, wears very flat and runs on a 17j ETA 900. Probably late ‘40s.

Attributed to one of the few female (is that term still allowed these days?) -led watch manufacturers, Mlle Mireille Grebler (later Mme Mireille Franz-Grebler) who also came to control Cauny, before that particular brand became Spanish owned sometime in the 1970s.

Regards.

Stuag 2018.JPG

Stuag ETA 900 2018.JPG

  • Like 2
Link to comment
Share on other sites

Yesterday's eBay deliveries.

A nice pin pallet that's the cleanest I've ever seen, came with the pallet fork loose, refitted and ticking away, will get a service and back onto eBay at some point.

Then an 'interesting' Seiko franken.

Lovely clean 7019A movement, (which was the reason for the purchase) bonus of new strap, practise dial to strip and make a dial from and hands.

2019-06-23 11.55.38.jpg

2019-06-23 11.55.54.jpg

2019-06-23 11.56.10.jpg

  • Like 1
Link to comment
Share on other sites

My second of this VEC brand and driven by a 15j Cupillard 233, the other one running on a 17J Lorsa P72. Brand name registered in 1932 by SR Ltd Etablissements of Marseilles, the city from where I bought this one, so no doubting its French Connection.

I’ll get my coat.

VEC 2 after.JPG

VEC 2 mvmt after.JPG

Link to comment
Share on other sites

Fero ??? Have just bought this because I like the face ! Never heard of this watch and it is a none runner. Any information would be much appreciated. Cost £28.54 Inc postage so wasn't too painful. Not sure if it's franken or worth its price? 

s-l1600 (4).jpg

s-l1600 (5).jpg

  • Like 1
Link to comment
Share on other sites

18 hours ago, AndyHull said:

Sure.

The Rodeo is here ->

RIMG0499.JPG

 

The "Li Jac" is here ->

 

RIMG0230.JPG

Both have remarkably similar movements. The "Li jac" is a simpler un-jeweled version, the "Rodeo" is jeweled.

 

 

Blimey, I see what you mean.

What you've got there would appear to be two French-made Framelac pin-levers, a movement maker about which very little seems to be recorded. I've attached an image from the Uhrforum.de of the jewelled-lever FR 304 for comparison of the bridge configuration (similar) and the shape of the balance cock (identical). 

Framlec FR 304 mvmt.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • As an experiment i was thinking of not hardening it to see how it fairs. Now that i have a complete template i could knock up another in half the time if this loses its elasticity. I might play about with a few pieces today to test their bending and spring properties. This was cs 100 the supplier quoted in annealed state, it was nice to work with files so I'm taking it thats its state. What you are looking seems like it would need annealing to work it. This is why i went for this stuff that cuts out that process, it was so easy to work.
    • Showing state of hairspring on receipt, backplate & 'dished' wheel. 
    • I would harden and temper (to a light blue). It's so easy to do and only takes a couple of minutes. A search on ebay UK for "spring steel strip cs" finds plenty available in small quantites and thicknesses from 0.1mm up.  But the question is ( @nickelsilver) which "CS" number is best for watch parts ?  Also, from one of the ads : "CARBON SPRING STEEL. SIZE IS METRIC 15.00mm X 0.10mm X 304 MM  CS100 FINISH BRIGHT . HARDENED AND TEMPERD TO 480-530VPN" I've no idea about 480-530VPN. Does that mean it needs annealing before working?       Have you seen this video, he shows how to determine where the indents go ?  
    • Here is the insert ring for rectangular or elliptical movements: Note that the length is the side with the stem cut out on the spreadsheet (in the picture below this is 15.15: Here is the fake pdf file, again you need to convert to .zip after download to access the FreeCAD and 3mf files. Rectangular insert disc.pdf    
    • as you took the mainspring out what did it look like? It's amazing how much amplitude you can get if the mainspring actually has the proper shape. last week I was doing a 12 size Hamilton and was very much surprised with the beautiful back curvature the mainspring had. Then the watch had a really nice amplitude the group would be so proud it was 350 until I dropped the lift angle down to 38 that drop the amplitude quite a bit below 300. then with the beautiful back curve it still had really nice amplitude the next day. I really wish all my mainspring's look like this as the watch had beautiful amplitude the next day. So many of the aftermarket pocketwatch Springs I see now do not have anything resembling a back curve may be a slight curve and that's about all. They still work but they just don't work as nice as a properly made spring. then Omega as all sorts of nifty technical documentation unfortunately every single corner is watermarked with where it came from who downloaded it etc. very paranoid company. On the other hand I will snip out images like from the document on recycling a mainspring barrel. for instance here's the section on what your mainspring should look like. water damaged a lot of times means rust was there rust on this watch?
×
×
  • Create New...