Jump to content

Repair of Vostok watches


SteveP

Recommended Posts

Hi everyone! I have recently acquired a couple of Vostoks which are giving me trouble. I know very little about watch repair, but am told that these ex-military pieces are pretty robust and easily fixable. Any advice appreciated!

1) a Komandirskie (apparently late 70s or early 80s). Worked like a dream when it arrived, then stopped. I took it in for repair, and was told that the mainspring has snapped. The watch has been sent away, but I'm now told that the repairer cannot get the necessary parts. 

2) An Amphibia (same era).  Again, worked when it arrived, but has stopped in the past 24 hours. It winds, but there is no response from the watch. Having spent £65 on it £40 getting a strap cut and fitted, I'm loathe to bin it, but am getting rather embarrassed taking my crazy Soviet watches into the repairers....

what I'd really like is a recommendation of someone who knows these watches and is happy to work on them for a decent price. Either a company or a hobbyist, I don't care. I know that lots of people seem to work on them, so hopefully I will be in luck.....

many thanks,

steve.

Link to comment
Share on other sites

  • 3 months later...

Hi,

The "stopping" is something I've noticed on a couple of my Vostoks. I've purchased a lot of NOS of late 90s Vostoks.

The solution I've found is to open up the back, release all the tension from the mainspring, then run the hands back and forth a  few times, this has temporarily solved my issues. While Vostoks do have a bullet-proof reputation, I'm betting, in your case (and mine)  that the watches are in desperate need of a service/oiling. Something I'm learning how to do.

In your case, if you're attached to the watch, either find a donor movement to take the mainspring out of, or swap the entire movement out.

If you are up to working on the, this Youtube video explains how to service a Vostok 2414a movement :

 

Best of luck!

Link to comment
Share on other sites

  • 2 years later...

Watches of this vintage  could be of either  2209 or 2409 variety. The 24 series is still being  produced  and new parts are still available  from meranom  in Russia. The  22 series is archaic  .parts must be cannibalized  from  other  movements. These can be purchased  by the bushel online. CHEAP.

Edited by yankeedog
  • Like 1
Link to comment
Share on other sites



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw Darwin’s theory of evolution has not been proven to be absolutely.  😀 
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
    • Hi.  I would like to take issue here regarding battery driven , watches, clocks,etc. I will and do repair these clocks in fact I have sever al in my collection as well as the regular mechanical ones. I have one on my mantle piece over 60 years old tha belonged to my wife’s Aunt,  long gone Iam afraid and it has been cleaned etc and never missed a beat and is accurate. Every one has their preduices as regards Electrical /electronic Horology but I regard it as part of the progress time line of the art of Horology and to be treated as such. Like Darwin’s theory of evolution it evolved.  Two cavemen knocking rocks together and a shard broke off , looking at it he worked out if it was stuck on the end of a stick he would have a spear. Likewise his pal seeing what he was up to picked up a piece  and did the same, now that’s evolution. Some clockmaker decided to build a clock that ran with a battery and no spring to wind up and break, progress and both the mechanical and battery driven clocks evolved, the battery ones got better to the point that if it broke you changed the complete unit. Likewise watches did the same but both can be repaired by people who approach Horology with an open mind without preduice.  We all have our likes and dislikes bu I for one would never dismiss any technology because I don’t like it.   The mobile phone is a good example of modern technology at work as is the automotive industry. There buttons and switches in my car I don’t use because to me they are not nesessary but I still drive the car.
    • I haven't gone through all the reading of what it might be or not. The first thing I would do if nothing obvious stands out is replace the mainspring, you have to start at the source of the power. Nine times out of ten that is the problem.  
    • Haha. You're just in a wicked mood today John 😅
×
×
  • Create New...