Jump to content

My friend ebay again


oldhippy

Recommended Posts

Well my guess is that dial is not original to the movement, I think the original would have been a moon phase dial and those parts have been removed from the movement. the case just does not sit right with me the pagoda top looks to be a later fabrication.

Link to comment
Share on other sites

hmm lets try again, so its a longcase movement from a much earlier period so would have been in a case of much grander proportions than it currently resides, the movement is mid 1700's to 1800 its a total and utter marriage of bits bought at auction sometime in the last year in the hope of fooling someone in parting with 749 quid

Link to comment
Share on other sites

19 minutes ago, wls1971 said:

hmm lets try again, so its a longcase movement from a much earlier period so would have been in a case of much grander proportions than it currently resides, the movement is mid 1700's to 1800 its a total and utter marriage of bits bought at auction sometime in the last year in the hope of fooling someone in parting with 749 quid

It does say in the description clocks like this are  '' hard to find ''  :biggrin:

I've just had another look, looks like a date wheel drive facing through the front of the movement  

Link to comment
Share on other sites

You are all correct in what you say. This is what is known as a marriage, the two main parts a case and movement put together to look as one, but with this one there’s more. When I said you need to know about longcase clocks, I was hoping someone would mention the false plate, that is the plate between the dial and the movement. Brass dials never had false plates only painted dials or what we call white dial clocks, if you look you can see top right it doesn’t even fit, there is no pillar to pin into it. The movement and false plate are as one and the seat board, but it’s been altered, the dial would have been a painted dial 12 inch, it is a late movement, you can tell it is late by the style of the pillars in the movement. The dial is from another clock, the spandrels on this dial have no significance at all, with antique brass dials, you can date the dial by the type of spandrel, this dial is I expect from the original movement as it fits well in the hood, so the dial and case fit each other. The hands are of a style from the 1750 to 1800 but these are more modern.  I’ve just looked at ebay and the sale has ended with no buyers.

If this had been a genuine antique Grandmother clock the price would have been in its thousands because they are as rear as rocking horse s**t.

Thanks to all that took part.

  • Like 1
Link to comment
Share on other sites

I hope that the knowledge that I pass on helps those on here that are interested in clocks. By turning it into a sort of game, makes learning fun. As you can see there is devil of a lot to learn when it comes to Longcase clocks, I have only scratched the service.

  • Like 1
Link to comment
Share on other sites

I haven't worked on any longcase
Clocks yet. But everything about this clock seems wrong the case looks newer and the movement something out of Frankenstein. It looks like parts don't belong. The case looks like the door won't close because it's too long up top. I can't wait to see what it is. I didn't see the pendulum. If it was as old as they say, the pendulum would be amazing and I would rip the door off to see it.

Sent from my XT1254 using Tapatalk

Link to comment
Share on other sites

The pendulum wasn't shown, that its self can give help with dating. The case is a style called Pagoda and yes it does look strange, certainly not my favorite design. If you have gone through my findings you can read why the parts don't belong. I expect one day you will work on a Longcase Clock, my self I have worked on hundreds from 30hour, 8day month duration and musical from all different periods.   

Link to comment
Share on other sites

That is awesome. I love clocks and the different stories the tell. I will keep looking for a long case to work on. I love the amount of knowledge you have with clocks. I love the eBay questions. Keep up the good work.

When I posted on this thread none of the other comments showed up, till I posted. I was a little too late. Ha ha.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • These are all American movements (with the exception of the "Rubis"), and are all almost certainly "negative set" which means the stem is part of the case. So it's normal that they are all missing- they are with their cases. You will need male square bench keys to wind/disarm them. Vintagewatchstraps has a great writeup on the different systems. But basically, any American "x" size movement will fit any case for that size, possibly with some adjusting of the stem position. With Swiss movements, there is some interchangeability between calibers, usually within the same maker's range, but not really overall- there are thousands of different stems out there.
    • Hi, I'm very new to watchmaking and this is my first time posting here.  I've bought a lot of 10 vintage pocket watches size 0s from e-bay and just got them today.  Most of the balance wheels sprung quite freely and thus seemed like a worthy endeavor as a first batch for exploration.  I've just realized that none of them have any winding stems. Is there any way I could source appropriate winding stems for the movements? There seems to be assortments of various stems selling in bulk on aliexpress, but would any of them fit?  I've read on other threads that some people lathe their own stems (which is waaaay out of my current skill set, which is pretty much nil). Others say that you 'just have to try a few and see if they fit'. I would much appreciate any advice for this matter. Thanks!
    • Nice work.  In the last year, I have been servicing Accutron 218s.  I have the official Accutron hoder that provides electrical contact to the movement.  It is a pretty clever design.  There is a cut in the ring of the holder (shaped like a "C").  When in relaxed state, the holder is slightly smaller than the watch movement.  You spread the cut slightly and drop the movement in and release.  Very clean.  I have made 3D versions of this setup.  Have not explored using it generally for other movements.
    • Double Oooooo   Removal tool? Dreamed of one of these. However, Kalle on Chronoglide showed everyone my system with the pegwood. Worked a treat. Felt so chuffed to be mentioned. https://www.youtube.com/watch?v=tTFrXjiyGKc 46:40 for the wheel removal. Mentions me at 50:00 and does the removal with the pegwood. Felt like my 15 minutes of fame.  
    • Sirius. Thank you for helping others with that information. This is why this forum is so good.
×
×
  • Create New...