Jump to content

Showing off the workbench I just made


NickP

Recommended Posts

Like a proud father, I feel the urge to show off my latest creation.

We recently moved to a new house which finally gave me the space to have an office/workshop. I have been working on a tiny little homemade bench the past few years and have been dreaming of a proper bench. Sadly the ready made ones I wanted are way out of my league.

My design goals were:

  1. Affordable
  2. versatile
  3. Free standing (i rent the house and cant drill bolts into the walls)
  4. Sturdy

I got the original inspiration from Dan Spitz. http://danspitz.com/for-sale/  

His concept is to make stunning workbench tops. You then supply the legs. However at £2,000 for the top, there was that budget thing again. I did however steal his idea (I don't actually know if he or someone else came up with it) of the routed groove along the edge. It has already proved to be a godsend in terms of catching small screws, and the odd tool. I decided to add a perspex screen on the back and down one side as I am notoriously rubbish at not flicking click springs etc across the room.

So, the basics.

Worktop: 40mm solid Beech kitchen work surface from Ebay 2000mm x 620mm - £85

Legs: Steel workbench legs from Machine Mart about £40 including shipping

Bench support: 2 L shaped steel struts from an old Victorian bed. £5.00 from a salvage yard, cleaned up with an angle grinder then polished.

Struts: 30mm square steel tubing from steel merchant £20.00

Danish oil for bare wood: £5.00 (four coats on either side)

£20 for bolts and screws.

So I made the whole thing for well under £200.

The top is extremely heavy and I haven't totally managed to eradicate minimal side movement and ideally I would bolt it to the wall but as I said I can't. Still it isn't going anywhere and I love it.

Of course you don't have to make it 2m long but I wanted somewhere for my lathe. I am building a perspex divider to protect the workbench from cuttings from the lathe.

Anyway, I hope it might give some of you some ideas.

IMG_8103.JPG

IMG_8109.JPG

IMG_8108.JPG

IMG_8106.JPG

IMG_8107.JPG

 

Edited by NickP
  • Like 9
Link to comment
Share on other sites

Hi Nick

That looks really nice.... Natural light helps too. I see you have carpet...Hope youve got a big magnet....My daughter has left home (ah sad) but the upside is Ive moved my watchmaking gear in. Ive just finished my new bench too. it was an old pine desk purchased at auction for very little money. How can they justify £2000 for a top without legs? Here is a pic of mine.

Chris

 

IMG_20170213_203759_01.jpg

  • Like 1
Link to comment
Share on other sites

Hi Chris,

That looks great. :)

I like the lighting you use. Yes carpet is a big issue. I do have a good magnet actually, but I was taught quite a clever technique of putting a stocking over a dyson hand held vacuum. Works pretty well too.

I need more drawer space too, which you seem to have plenty of.

  • Like 1
Link to comment
Share on other sites

Hi Nick

You did mention side movement on your bench. When I built a workbench out of angle iron for my outside workshop I had the same problem. You need a couple of 'diagonals' perhaps at the back between the leg uprights and the top base. This would stop it trying to diamond out so to speak. 1/2 inch angle or box section would be ok and would eliminate the side movement you mention. Anyway you probably know all this.

Chris

 

Link to comment
Share on other sites

8 minutes ago, chrisdt said:

Hi Nick

You did mention side movement on your bench. When I built a workbench out of angle iron for my outside workshop I had the same problem. You need a couple of 'diagonals' perhaps at the back between the leg uprights and the top base. This would stop it trying to diamond out so to speak. 1/2 inch angle or box section would be ok and would eliminate the side movement you mention. Anyway you probably know all this.

Chris

 

Thanks Chris,

So far it is very light, but need to see what happens when I start using the lathe. I shall certainly consider diagonals if I get a problem. Thanks again

Link to comment
Share on other sites

That's a very nice bench indeed. You could stop any lateral movement with as @chrisdt says a full diagonal across the back but also a couple of knee braces would work one in either corner at the top about halfway down the leg at 45 degrees that should stop any movement.

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
4 hours ago, WileyDave said:

Very nice bench NickP AND room has a view! you could probably find some drawers that would fit between crossmembers and top. I especially like the clear Lucite wrap around parts catcher! :)

Dave

Thanks for the kind words Dave. The parts catcher is essential for me. I have a bad habit of flicking things across the room :)

as for the drawers I am constantly on the lookout for how I can do that. I totally agree with you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...