Jump to content

Showing off the workbench I just made

NickP

By NickP
in Tools & Equipment

 Share

Recommended Posts

NickP Member

NickP

Posted
Posted (edited)

Like a proud father, I feel the urge to show off my latest creation.

We recently moved to a new house which finally gave me the space to have an office/workshop. I have been working on a tiny little homemade bench the past few years and have been dreaming of a proper bench. Sadly the ready made ones I wanted are way out of my league.

My design goals were:

  1. Affordable
  2. versatile
  3. Free standing (i rent the house and cant drill bolts into the walls)
  4. Sturdy

I got the original inspiration from Dan Spitz. http://danspitz.com/for-sale/  

His concept is to make stunning workbench tops. You then supply the legs. However at £2,000 for the top, there was that budget thing again. I did however steal his idea (I don't actually know if he or someone else came up with it) of the routed groove along the edge. It has already proved to be a godsend in terms of catching small screws, and the odd tool. I decided to add a perspex screen on the back and down one side as I am notoriously rubbish at not flicking click springs etc across the room.

So, the basics.

Worktop: 40mm solid Beech kitchen work surface from Ebay 2000mm x 620mm - £85

Legs: Steel workbench legs from Machine Mart about £40 including shipping

Bench support: 2 L shaped steel struts from an old Victorian bed. £5.00 from a salvage yard, cleaned up with an angle grinder then polished.

Struts: 30mm square steel tubing from steel merchant £20.00

Danish oil for bare wood: £5.00 (four coats on either side)

£20 for bolts and screws.

So I made the whole thing for well under £200.

The top is extremely heavy and I haven't totally managed to eradicate minimal side movement and ideally I would bolt it to the wall but as I said I can't. Still it isn't going anywhere and I love it.

Of course you don't have to make it 2m long but I wanted somewhere for my lathe. I am building a perspex divider to protect the workbench from cuttings from the lathe.

Anyway, I hope it might give some of you some ideas.

IMG_8103.JPG

IMG_8109.JPG

IMG_8108.JPG

IMG_8106.JPG

IMG_8107.JPG

 

Edited by NickP
  • Like 9
Link to comment
Share on other sites
chrisdt WRT Addict

chrisdt

Posted
Posted

Hi Nick

That looks really nice.... Natural light helps too. I see you have carpet...Hope youve got a big magnet....My daughter has left home (ah sad) but the upside is Ive moved my watchmaking gear in. Ive just finished my new bench too. it was an old pine desk purchased at auction for very little money. How can they justify £2000 for a top without legs? Here is a pic of mine.

Chris

 

IMG_20170213_203759_01.jpg

  • Like 1
Link to comment
Share on other sites
NickP Member

NickP

Posted
  • Author
Posted

Hi Chris,

That looks great. :)

I like the lighting you use. Yes carpet is a big issue. I do have a good magnet actually, but I was taught quite a clever technique of putting a stocking over a dyson hand held vacuum. Works pretty well too.

I need more drawer space too, which you seem to have plenty of.

  • Like 1
Link to comment
Share on other sites
chrisdt WRT Addict

chrisdt

Posted
Posted

Hi Nick

You did mention side movement on your bench. When I built a workbench out of angle iron for my outside workshop I had the same problem. You need a couple of 'diagonals' perhaps at the back between the leg uprights and the top base. This would stop it trying to diamond out so to speak. 1/2 inch angle or box section would be ok and would eliminate the side movement you mention. Anyway you probably know all this.

Chris

 

Link to comment
Share on other sites
NickP Member

NickP

Posted
  • Author
Posted
8 minutes ago, chrisdt said:

Hi Nick

You did mention side movement on your bench. When I built a workbench out of angle iron for my outside workshop I had the same problem. You need a couple of 'diagonals' perhaps at the back between the leg uprights and the top base. This would stop it trying to diamond out so to speak. 1/2 inch angle or box section would be ok and would eliminate the side movement you mention. Anyway you probably know all this.

Chris

 

Thanks Chris,

So far it is very light, but need to see what happens when I start using the lathe. I shall certainly consider diagonals if I get a problem. Thanks again

Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

That's a very nice bench indeed. You could stop any lateral movement with as @chrisdt says a full diagonal across the back but also a couple of knee braces would work one in either corner at the top about halfway down the leg at 45 degrees that should stop any movement.

 

  • Like 1
Link to comment
Share on other sites
  • 3 weeks later...
NickP Member

NickP

Posted
  • Author
Posted
4 hours ago, WileyDave said:

Very nice bench NickP AND room has a view! you could probably find some drawers that would fit between crossmembers and top. I especially like the clear Lucite wrap around parts catcher! :)

Dave

Thanks for the kind words Dave. The parts catcher is essential for me. I have a bad habit of flicking things across the room :)

as for the drawers I am constantly on the lookout for how I can do that. I totally agree with you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Malocchio
      Is this pallet fork over-locking?

      By Malocchio · Posted

      The entry jewel's not as bad but seems still too much lock. I do epilame the escape wheel and pallet jewels, then run dry for about 15 minutes, then put 9415 in exit jewel very little at a time and check with backlight how the oil's distributed.  Another question is about capped escape wheels. Should I somehow wear the epilame off the pivots before installing the wheel? I normally let the escape wheel run dry for that said 15 minutes when there's no cap jewel.
    • Malocchio
      Bezels - What am I doing wrong?

      By Malocchio · Posted

      Sometimes there's a certain place under the bezel where the case knife is supposed to be placed. In this borrowed pic there's a small crack at 3 o'clock. 
    • Waggy
      Bezels - What am I doing wrong?

      By Waggy · Posted

      Hi my fellow forum addicts, I'm writing this as I seem to have a hole in my knowledge (probably one of many!) I seem to have a horrible time removing bezels from watches. I am talking about the rotating type on sports/diving watches. I see many videos where the guy on screen barely inserts the case knife under the bezel and with no effort it pops off easily, then at the end it clicks back into place by hand with no effort. I am sure that part of this is due to skillful video editing, but I seem to wrestle with them, I have tried case knives and  even when using the tool below, I tighten it up in several positions and nothing happens. On a many occasions I have even warped the bezel in my attempts to remove it. Similarly, I have issues replacing bezels after cleaning etc. and often they have to be replaced using a press tool and inevitably are far too tight and will not rotate or loose to the point where they fall off or loose their click (perhaps due to micro warping when I tried to remove??). It is now to the point where I am actually avoiding watches with bezels as my success rate with them is terrible......please help!! In short I am asking: What am I doing wrong? What is the best method for removing bezels - how do you do it? What is the best method for replacing bezels - how do you do it? Any tips or tricks? Thanks  
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Amplitude still seems low, but I'm going to let it run in a bit and revisit. Meanwhile, got the first layer of the calendar works together and made sure the date ring snaps to both in quickset and regular setting. The mechanism is pretty cool, so I took a video.  
    • AliCat
      Hello!

      By AliCat · Posted

      This is the part that need replaced if anyone can point me in the right direction. 
×
×
  • Create New...