Jump to content

Greetings from the Bay Area!


Federico

Recommended Posts

Greetings! 

My name is Federico I am located in Santa Cruz California. I have been collecting pocket watches for a while now as well as using them daily. I find them truly marvelous. For the last 2 months I have been learning to repair/revive these old movements mainly to keep my own pocket watches working. I hope to learn plenty from the community and those willing to teach.

Currently I am working on restoring my Hamilton 912 which was one of my first pocket watches.  

Thank you for your time and I look forward to speaking and getting to know many of you.

Kind regards,

F

  • Like 1
Link to comment
Share on other sites

Hello Federico, pocket watches are well worth collecting there are so many about, you might like to post some photos of your collection so we can all see. Getting to know the names of all the parts will help you as they are the same in manual watches. There's lots of info on here that I'm sure will help you. 

Link to comment
Share on other sites

Hello Federico and welcome from me,

I spent some time in Santa Cruz when in California visiting my son.  Took Highway One from San Francisco to get back towards LA and stopped off on the way. Lovely place.

I am sure you will be at home in the forum, a wealth of knowledge here and freely given if you get into bother with a project.

Cheers,

Vic

 

Link to comment
Share on other sites

  • 10 months later...
On 2/23/2017 at 5:56 PM, Federico said:

 Attached is the watch I am using today. Jean Marcel ETA 6498. 

With a large delay, welcome here.
Lovely piece. Seems like -as your name suggests- that you have European roots or preferences even if living in the land of the Elgins, Waltham's, and (as I've recently learned) Illinois. I took the liberty of re-posting your great picture with a more conventional orientation.
I used to hang out in S.C during the weekends. Best memories are about a bikers wooden patio bar, and a slow safe riding lecture from a enraged cop on the hills.

 

35976322c013000fbaa83a341c8603bb.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
×
×
  • Create New...