Jump to content

Looks like this watch will be my first vitim....


Recommended Posts

Don't think of it as victim, rather a patient that needs a doctor's touch. B)  I could see in the pic that your primary winding wheel screw has been used a bit more than normal. (often an indication it had been over torqued at some point in time) Probably wouldn't hurt to capture each step of disassembly with photos, in case you are called away from your "victim". Good luck and if you get stuck with something, just ask, someone should be able to help.

  • Like 2
Link to comment
Share on other sites

Molnija 3602? An improved SSSR variant of a 15 jewel Cortebert 616. Good choice, I think. Solid movements, affordable and still plentiful. Quite a few sites and videos about them too, Molnija is quite popular.

Another bonus is that one can imagine working on a vintage Rolex movement in a Panerai while rebuilding it, as mentioned Corteberts were used by them... :)

  • Like 1
Link to comment
Share on other sites

Good Luck ... I am new too... What I did my first time was take just a few components off and put it back together , then the next attempt go a little deeper and put it back. It was a good exercise and built a little confidence also gets you familiar with where things go.

Also as WileyDave suggested taking photos of each step is invaluable. 

 

Using method I described above I was able to fix a broken watch ( it was just the mainspring) my first time out. Must have been beginners luck, because it seems the more I know the more problems I am starting to have. LOL 

 

Regards 

Anthony

  • Like 1
Link to comment
Share on other sites

8 hours ago, WileyDave said:

Don't think of it as victim, rather a patient that needs a doctor's touch. B)  I could see in the pic that your primary winding wheel screw has been used a bit more than normal. (often an indication it had been over torqued at some point in time) Probably wouldn't hurt to capture each step of disassembly with photos, in case you are called away from your "victim". Good luck and if you get stuck with something, just ask, someone should be able to help.

I saw that screw you are talking about, it doesnt look to bad in the other photos.

image.png

Link to comment
Share on other sites

13 hours ago, CapMoy said:

Hey Douglas1701

Good luck !...

I'm going to do the same to this elgin and see how it goes...I will try to do the same way adioro110 did on his .

Regards...

 

image.jpeg

Good deal...hope it works out good...gonna be a little while before i get started. Still waiting on stuff to arrive. Im sure this one will look brand new when you get finished with it. 

Doug

Link to comment
Share on other sites

It is in not working condition seller said balance is not good but I will try to take all apart clean it and see how it goes ...I do not know , if possible , how to fix it .

I will take this as a practice before servicing my working Rockford watch...

Moises

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
6 hours ago, Endeavor said:

Perhaps this may be of any use? http://linuxfocus.org/~guido/molnija-pocket-watch/

I just serviced one, very nice and easy to work on; great "starter";

58a55df9f357d_Molnija3602.thumb.jpg.a0869b734df1cecc24872a9bace2b546.jpg

Thanks for the post. I actually found that site a few weeks back. The one i ordered was runing a bit fast, so i adjusted the speed very slightly and I put to test with a digital stop watch to see of it was keeping time pretty good...tested it for 30 minutes and it kept up second by second untill i stopped the test. I jave check it for two days now and it remains insync with my ipad....not to bad for $45.

thanks again,

doug

Link to comment
Share on other sites

That's a good price !! I guess you have seen on that website that a nearly similar, or similar, movement was used by Rolex. Can't be that bad.

The one I just serviced was very nicely polished on the back (even with blued screws), but crudely finished underneath. Money had to be saved somewhere.

Chances are yours has a good finish all around. That you received a next to "freebee" is even better as a starter. Take your time, and the first watches will be under your belt ;) 

  • Like 1
Link to comment
Share on other sites

Here is a pic of the one I ordered. There is a spot at the 10:00 o'clock position...looks like some hot gold solder or something similar dripped onto the plastic dial. Im going out on a limb here...and correct me if im wrong..but from what i have read about American railroad watch accuracy, this watch keeps better time. So far its at about 2 seconds per day which from what i understand is pretty dang good. 

image.jpeg

image.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...