Jump to content

Elma Watch Cleaning Machine


Recommended Posts

2 hours ago, Mark said:

That one doesn't have the transducer - but very true what you said.

I had two varimatics with the ultrasonic units but I prefer my elma super elite - it's manual but never have a problem with it, plus I get to keep the watch in the jars for much longer should I want to.

Sorry, I thought all the "vari matic" ones had ultrasonic and the none ultrasonic ones were called "watch matic" or something else.

I looked at buying one a couple of weeks ago and rang this company below about getting the ultrasonics repaired, he has a fully updated refurbished one for sale at £2200, he quoted me the £1600 to refurb one.

http://www.delphelectronics.co.uk/pre-owned-machines.htm

Link to comment
Share on other sites

3 hours ago, Tiktok said:

Sorry, I thought all the "vari matic" ones had ultrasonic and the none ultrasonic ones were called "watch matic" or something else.

I looked at buying one a couple of weeks ago and rang this company below about getting the ultrasonics repaired, he has a fully updated refurbished one for sale at £2200, he quoted me the £1600 to refurb one.

http://www.delphelectronics.co.uk/pre-owned-machines.htm

That's Graham Baxter - he's a very good chap. His workshop is just down the road from me.

The L&R shown in the OP definitely does not have a transducer (Big metal cylinder where the basket will be attached). But it can be converted to ultrasonic with the addition of a unit which sits under the main machine, and the transducer which is fitted to the head.

  • Like 1
Link to comment
Share on other sites

1 hour ago, Mark said:

That's Graham Baxter - he's a very good chap. His workshop is just down the road from me.

The L&R shown in the OP definitely does not have a transducer (Big metal cylinder where the basket will be attached). But it can be converted to ultrasonic with the addition of a unit which sits under the main machine, and the transducer which is fitted to the head.

That's right Mark.

Link to comment
Share on other sites

5 hours ago, Mark said:

That's Graham Baxter - he's a very good chap. His workshop is just down the road from me.

The L&R shown in the OP definitely does not have a transducer (Big metal cylinder where the basket will be attached). But it can be converted to ultrasonic with the addition of a unit which sits under the main machine, and the transducer which is fitted to the head.

Yeah, that's him Grayham Baxter, he really knows his stuff, I was talking to him for ages on the phone. He was really helpful.

 

 

Link to comment
Share on other sites

  • 8 months later...

That was my point the R90 is now obsolete and was been replaced by the "Elmasolve RM" which retails at £3k +.

You have got to do lots and lots of repairs to get any sort of return for that sort of outlay.  If you can find a pre-owned one and source replacement parts then it might be a viable option. However if my info is correct they are also not as efficient as the the old L & R machines. 

 

 

 

Link to comment
Share on other sites

  • 1 month later...
On 28/1/2017 at 10:04 PM, Peterburke340 said:

 

I know they don't come up very often but am looking to buy an Elma RM90 watch cleaning machine if anyone has one or knows of one for sale. I am uk based.

Thanks

Sent from my iPhone using Tapatalk

 

Elma RM90 is on my wish list as well. Some of these machines have problems with the wire to the motor. You may be lucky and find one and maybe you can fix it ... It's such a machine with this mistake im looking for!

RM 90 19$ repair >>>

More about this problem >>>

I've occasionally seen this elma at online auctions, I have seen them there at very fair price


An old auction >>>

Another old auction >>>

 

I hope you get one some day... good luck

 

 

Link to comment
Share on other sites

20 minutes ago, teegee said:

Interesting machine!

L&R vari-matics seem impossible to obtain these days, unless you don't mind paying USD 2k..

Expensive yes but one hell of a cleaning machine and all automatic, you can set the timing for each jar for how long you want it to be in the cleaning jar and for both rinse jars and heater and spin off. There is even a part which enables you to clean many watches at the same time. I used a few machines in my days and this one is certainly the tops.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...