Jump to content

Skills and knowledge for watch repair

Hamish
 Share

Recommended Posts

Hamish Member

Hamish

Posted
Posted

I started this hobby some 10 years ago and took it up to see if I could get some skills and knowledge so that I would have something worthwhile to do in retirement and also partially because I avoid the telly and need distraction from a  job that is stressfull at times. I have never had any formal training, but always liked pulling things apart and fixing them. I have restored/repaired many watches and dont charge for this as long as the watch owner promises to wear Grandads or Dads old watch every now and again. Everyone promises to do this and I do like to see folks wearing these old watches and not having them in the back of a drawer somewhere. 

OK so thats where I am coming from and as I see many new to watch repair folks here, I though a thread starter might be what skills you thought necessary for the jobs we do, how you managed to develop these skills and where you got your knowledge. I'll start it off. Some of what we are likley to say will be obvious, but it maybe of help to newer folk.

I think patience and a reasonably steady hand factors would be important. Just figuring out how to use tweezers and screwdrivers does take time, so take apart and put back together as much as you can. You will get lots of satisfaction through getting something to work and keep reasonable time. Look for old movements, say Bulova - available cheap, which are simple manual wind jobs...you will soon pick it up.

A number of devices can assist eyesight these days but if your eyes are good it really makes it easier.  I am not known for my patience, but I think I have improved this somewhat. Taking time to source the parts carefully requires this. Some projects take years to finish. You need to recognise when it is not fun any more and take a break. Don't jump to conclusions about a fault, but think things through as best as you can. Of course knowledge can be gained by things like Marks videos...I still watch these and pick up lots. I also think an open mind to repair techniques is important as well, that is, dont get locked into doing things one way as another method may actually be better with less chance of breaking something. The first skills I learnt were the manual dexterity ones. We all talk about breaking parts of the first movments we work on so develop the fine skills you need through repitition.

I know we all like pictures, so here are a couple of my workshop.

IMG_2144.JPG

IMG_2145.JPG

IMG_2146.JPG

  • Like 4
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
Posted

Great insight into your hobby, and some great advice for newbies.  I can relate to some of your findings over the years, patience is key, and as you say, a very steady hand, plus suitable eyewear magnification, lighting etc.

Thanks for the photos, I will share some photos of mine once I have completed my remodelling.

@Geo I managed to find a U.S supplier of the Alvin covering who ship direct to me ;) 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Without Our Forum

      By VWatchie · Posted

      Yes, "Sold out" is difficult to understand. There doesn't seem to be a lot going on. It's been nine months since any new video was published on the Watch Repair Channel. The Level 4 course on watchfix.com has been in progress for what feels like forever (several years!?). Maybe Mark's enterprises aren't doing well or perhaps already so profitable there's nothing much to motivate him for more material. Or, perhaps these days he's more into crochet. The real reason is probably something entirely different but it would be nice/interesting to know. I don't mean to sound gloomy or pessimistic, but I wouldn't be surprised to be met by an HTTP 404. Every day feels like a gift. Speaking of watchfix.com I've been postponing the "Level 5: Servicing Chronograph Watches" course for a very, very long time. Anyway, I just enrolled on it so it's going to be very interesting to see the videos. I must say, IMO there's nothing really that can compete with Mark's courses when it comes to presentation and video quality. It's simply world-class and makes me associate with some really expensive BBC productions.
    • nickelsilver
      Setting lever spring

      By nickelsilver · Posted

      Steel has some funny properties, or at least counterintuitive. The modulus of elasticity is effectively (not exactly, but close enough) the same for steel that is annealed and hardened. What changes is the point of plastic deformation* . If the movement of your spring doesn't pass that, it should work fine. It looks a little thick, I would thin it a bit maybe from the main body out about halfway, maybe 10-20% thinner (not in thickness, along its form). But if it works it works!   *So- if you have two bars of the same steel, one annealed, one at 600 Vickers (general hardness watch arbors might be), clamp them to a table so the same length is hanging out, and put a weight on the ends, they will bend the same amount. But if you continue to add weight, then remove it, at a point the annealed bar won't return to its original straightness. That's the point of plastic deformation. But up to that point, as springs, they are the same. However- their wear characteristics will be very very different. And getting the hardened bar past its point of plastic deformation takes a lot more effort.
    • swiss2k
      Omega cal. 565 - low amplitude

      By swiss2k · Posted

      @JohnR725 now that you've mentioned it. This is actually the second aftermarket spring (same place and brand) I ordered as the first one broke. The eye on which the arbor pulls on, broke off on the first spring after the first wind, and also it was a bit to large for the arbor. Looked like on one the second picture in the 2nd group. The second one was exactly the same, I had to bend it a bit, to give it a more prominent curve to the end of the spring so that the arbor catches the eye.  Also I believe both were 5-10mm shorter. Not that I writing that, I feel a bit dumb, as the spring might actually been the problem all along, although its advertised as a substitute to the original...     
    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      The CS70 is the only one they show as annealed.  A further search on ebay, I found CS75 and CS100 annealed carbon steel strips  e.g. https://www.ebay.co.uk/itm/314072784422
    • Hawaiikook808
      Balance spring fell out of regulator pin.

      By Hawaiikook808 · Posted

      Aloha and thanks for catching all these small but important details, John.  I'm going to give it a shot. The good news is I have a parts movement here with a perfect complete balance.  I will place them side by side for visual reference when doing what you outlined.  It's been a while were I've had a hobby in which I joined a forum.  I forgot just how helpful everyone can be. Mahalo. Frank.
×
×
  • Create New...