Jump to content

Recommended Posts

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing like the clock. :DI haven't had a T V in my home for about 12  to 15 years.

Link to comment
Share on other sites

LOL! Nice one - I spotted this too!

I can only think that the 'runner' on the production team had been told to get a couple of watch case openers and the director liked the look of the sturdy and butch looking bench mounted snap-on case opener rather than the flimsy jaxa style that had been obtained - to heck with accuracy!

What was potentially interesting though is that they managed to track down the identify of the victim because he had had his inexpensive watch serviced twice and the servicing watchmaker had scratched the dates and his name on the inside of the case. Is this common practice on a service?

Link to comment
Share on other sites

8 hours ago, oldhippy said:

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing like the clock. :DI haven't had a T V in my home for about 12  to 15 years.

Recommend You to watch "The time machine" 1960 :) Lots of nice clocks in that movie. 

Link to comment
Share on other sites

  • 3 weeks later...
On 1/6/2017 at 10:39 AM, WatchMaker said:

LOL! Nice one - I spotted this too!

I can only think that the 'runner' on the production team had been told to get a couple of watch case openers and the director liked the look of the sturdy and butch looking bench mounted snap-on case opener rather than the flimsy jaxa style that had been obtained - to heck with accuracy!

What was potentially interesting though is that they managed to track down the identify of the victim because he had had his inexpensive watch serviced twice and the servicing watchmaker had scratched the dates and his name on the inside of the case. Is this common practice on a service?

My father was a watchmaker for 60 years and when he did a major overhaul on a watch, he would, in tiny print, scratch his initials and a ticket number inside the case.  He recorded the ticket number in a book and included all the information regarding the watch (make, model, material etc), it's owner, what service was performed on it and what he charged.  I have those books. As a matter of fact, I have recorded some of the information in them.  That was one of the jobs I would do when I worked for him in my younger days.   He used different tickets if he just changed a crystal or stem and crown or something minor.  The information from those tickets was recorded in  different books (with less information) and the ticket number was not scratched into the watch case for those.  Of course, most of the watches he worked on were not luxury watches.  A big percent of them were railroad watches.  He was a railroad watch inspector for Southern Pacific and Missouri Pacific railroads for many years. 

  • Like 2
Link to comment
Share on other sites

  • 1 year later...

oldhippy

  • Distinguished Member
  •  
  • oldhippy
  • Moderators
  • staff.png.59af14134b770bab5bad649b5c90ee
  • 1,141
  • 3,532 posts
  • LocationMid - Devon
  •                                  

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing  like the clock. :DI haven't had a T V in my home for about 12  to 15 yea

I'll 'ditto' that last comment above about giving up the tv.

I did that a few years ago.

It's nothing more than a constant repeat of things that you've already seen  before.

Why do people find it necessary to watch the same films and programmes over and over and over again?

And, of course, you have to pay the BBC (Biased Broadcasting Company) an

outlandish fee to do so, so that they can waste millions of your  pounds, giving it to the same  ubiquitous celebrities.

 

Link to comment
Share on other sites

  •  

oldhippy

  • Distinguished Member
  •  
  • oldhippy
  • Moderators
  • staff.png.59af14134b770bab5bad649b5c90ee
  • 1,141
  • 3,532 posts
  • LocationMid - Devon
  •                                  

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing  like the clock. :DI haven't had a T V in my home for about 12  to 15 yea

I'll 'ditto' that last comment above about giving up the tv.

I did that a few years ago.

It's nothing more than a constant repeat of things that you've already seen  before.

Why do people find it necessary to watch the same films and programmes over and over and over again?

And, of course, you have to pay the BBC (Biased Broadcasting Company) an

outlandish fee to do so, so that they can waste millions of your  pounds, giving it to the same  ubiquitous celebrities.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Not SS but very slight wear on the underside edges have a little brass showing under magnification. New crystal arrived £3 with tax. Nice champaign dial color.
    • I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf While parts are drying I'm on the hunt for a replacement crystal. I can measure the opening and get a generic one, but it'd be nice to find out what the original looked like first. Of course, case code 3093 does not appear in any of my reference materials. JulesBorel lists a C3093 case code, and shows Bulova part # 1222-5. Does anyone have information on this guy? I found a thread here talking about how the -5 is the height of the crystal, but that's as far as I've gotten. I also found one site that claims to have it in stock, but before I risk my $20 I'd like to confirm it's the right part.  
    • Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
    • Hi Vandan. Hi from a fellow newbie! Marshall has got a lot to answer for hasn't he! 😄. I also got hooked to this hobby after watching his videos.  Good luck with your journey to service your Grandfather's watch.   Nick 
×
×
  • Create New...