Jump to content

Recommended Posts

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing like the clock. :DI haven't had a T V in my home for about 12  to 15 years.

Link to comment
Share on other sites

LOL! Nice one - I spotted this too!

I can only think that the 'runner' on the production team had been told to get a couple of watch case openers and the director liked the look of the sturdy and butch looking bench mounted snap-on case opener rather than the flimsy jaxa style that had been obtained - to heck with accuracy!

What was potentially interesting though is that they managed to track down the identify of the victim because he had had his inexpensive watch serviced twice and the servicing watchmaker had scratched the dates and his name on the inside of the case. Is this common practice on a service?

Link to comment
Share on other sites

8 hours ago, oldhippy said:

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing like the clock. :DI haven't had a T V in my home for about 12  to 15 years.

Recommend You to watch "The time machine" 1960 :) Lots of nice clocks in that movie. 

Link to comment
Share on other sites

  • 3 weeks later...
On 1/6/2017 at 10:39 AM, WatchMaker said:

LOL! Nice one - I spotted this too!

I can only think that the 'runner' on the production team had been told to get a couple of watch case openers and the director liked the look of the sturdy and butch looking bench mounted snap-on case opener rather than the flimsy jaxa style that had been obtained - to heck with accuracy!

What was potentially interesting though is that they managed to track down the identify of the victim because he had had his inexpensive watch serviced twice and the servicing watchmaker had scratched the dates and his name on the inside of the case. Is this common practice on a service?

My father was a watchmaker for 60 years and when he did a major overhaul on a watch, he would, in tiny print, scratch his initials and a ticket number inside the case.  He recorded the ticket number in a book and included all the information regarding the watch (make, model, material etc), it's owner, what service was performed on it and what he charged.  I have those books. As a matter of fact, I have recorded some of the information in them.  That was one of the jobs I would do when I worked for him in my younger days.   He used different tickets if he just changed a crystal or stem and crown or something minor.  The information from those tickets was recorded in  different books (with less information) and the ticket number was not scratched into the watch case for those.  Of course, most of the watches he worked on were not luxury watches.  A big percent of them were railroad watches.  He was a railroad watch inspector for Southern Pacific and Missouri Pacific railroads for many years. 

  • Like 2
Link to comment
Share on other sites

  • 1 year later...

oldhippy

  • Distinguished Member
  •  
  • oldhippy
  • Moderators
  • staff.png.59af14134b770bab5bad649b5c90ee
  • 1,141
  • 3,532 posts
  • LocationMid - Devon
  •                                  

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing  like the clock. :DI haven't had a T V in my home for about 12  to 15 yea

I'll 'ditto' that last comment above about giving up the tv.

I did that a few years ago.

It's nothing more than a constant repeat of things that you've already seen  before.

Why do people find it necessary to watch the same films and programmes over and over and over again?

And, of course, you have to pay the BBC (Biased Broadcasting Company) an

outlandish fee to do so, so that they can waste millions of your  pounds, giving it to the same  ubiquitous celebrities.

 

Link to comment
Share on other sites

  •  

oldhippy

  • Distinguished Member
  •  
  • oldhippy
  • Moderators
  • staff.png.59af14134b770bab5bad649b5c90ee
  • 1,141
  • 3,532 posts
  • LocationMid - Devon
  •                                  

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing  like the clock. :DI haven't had a T V in my home for about 12  to 15 yea

I'll 'ditto' that last comment above about giving up the tv.

I did that a few years ago.

It's nothing more than a constant repeat of things that you've already seen  before.

Why do people find it necessary to watch the same films and programmes over and over and over again?

And, of course, you have to pay the BBC (Biased Broadcasting Company) an

outlandish fee to do so, so that they can waste millions of your  pounds, giving it to the same  ubiquitous celebrities.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀       
    • Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
    • I did not. I thought about it, but I had cleaned it in my ultrasonic, and the tech sheet shows lubricating it in place already assembled, so I figured discretion was the better part of valor. Although since I have to depth the jewels anyway, maybe I pull the pinion off to rule it out 100% as part of the problem. Do you know if there's a safe way to do it? I don't want to use a puller because it would push down on the plane of the wheel, and that seems like a Bad Idea. I thought about using a roller table remover, but I don't think I have a hole stake pointy enough to push it down.
    • Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
×
×
  • Create New...