Jump to content

Recommended Posts

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing like the clock. :DI haven't had a T V in my home for about 12  to 15 years.

Link to comment
Share on other sites

LOL! Nice one - I spotted this too!

I can only think that the 'runner' on the production team had been told to get a couple of watch case openers and the director liked the look of the sturdy and butch looking bench mounted snap-on case opener rather than the flimsy jaxa style that had been obtained - to heck with accuracy!

What was potentially interesting though is that they managed to track down the identify of the victim because he had had his inexpensive watch serviced twice and the servicing watchmaker had scratched the dates and his name on the inside of the case. Is this common practice on a service?

Link to comment
Share on other sites

8 hours ago, oldhippy said:

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing like the clock. :DI haven't had a T V in my home for about 12  to 15 years.

Recommend You to watch "The time machine" 1960 :) Lots of nice clocks in that movie. 

Link to comment
Share on other sites

  • 3 weeks later...
On 1/6/2017 at 10:39 AM, WatchMaker said:

LOL! Nice one - I spotted this too!

I can only think that the 'runner' on the production team had been told to get a couple of watch case openers and the director liked the look of the sturdy and butch looking bench mounted snap-on case opener rather than the flimsy jaxa style that had been obtained - to heck with accuracy!

What was potentially interesting though is that they managed to track down the identify of the victim because he had had his inexpensive watch serviced twice and the servicing watchmaker had scratched the dates and his name on the inside of the case. Is this common practice on a service?

My father was a watchmaker for 60 years and when he did a major overhaul on a watch, he would, in tiny print, scratch his initials and a ticket number inside the case.  He recorded the ticket number in a book and included all the information regarding the watch (make, model, material etc), it's owner, what service was performed on it and what he charged.  I have those books. As a matter of fact, I have recorded some of the information in them.  That was one of the jobs I would do when I worked for him in my younger days.   He used different tickets if he just changed a crystal or stem and crown or something minor.  The information from those tickets was recorded in  different books (with less information) and the ticket number was not scratched into the watch case for those.  Of course, most of the watches he worked on were not luxury watches.  A big percent of them were railroad watches.  He was a railroad watch inspector for Southern Pacific and Missouri Pacific railroads for many years. 

  • Like 2
Link to comment
Share on other sites

  • 1 year later...

oldhippy

  • Distinguished Member
  •  
  • oldhippy
  • Moderators
  • staff.png.59af14134b770bab5bad649b5c90ee
  • 1,141
  • 3,532 posts
  • LocationMid - Devon
  •                                  

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing  like the clock. :DI haven't had a T V in my home for about 12  to 15 yea

I'll 'ditto' that last comment above about giving up the tv.

I did that a few years ago.

It's nothing more than a constant repeat of things that you've already seen  before.

Why do people find it necessary to watch the same films and programmes over and over and over again?

And, of course, you have to pay the BBC (Biased Broadcasting Company) an

outlandish fee to do so, so that they can waste millions of your  pounds, giving it to the same  ubiquitous celebrities.

 

Link to comment
Share on other sites

  •  

oldhippy

  • Distinguished Member
  •  
  • oldhippy
  • Moderators
  • staff.png.59af14134b770bab5bad649b5c90ee
  • 1,141
  • 3,532 posts
  • LocationMid - Devon
  •                                  

That's T V for you. One of the things I used to do was look at the clocks to see if they were working, I also found many times a clock would be in a seen and would chime or strike but the sound it would give out was nothing  like the clock. :DI haven't had a T V in my home for about 12  to 15 yea

I'll 'ditto' that last comment above about giving up the tv.

I did that a few years ago.

It's nothing more than a constant repeat of things that you've already seen  before.

Why do people find it necessary to watch the same films and programmes over and over and over again?

And, of course, you have to pay the BBC (Biased Broadcasting Company) an

outlandish fee to do so, so that they can waste millions of your  pounds, giving it to the same  ubiquitous celebrities.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Happy to have helped, great way to start the day with a win! 🥳
    • Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
    • Hi! I am in the process of restoring a rado captain cook mkII. I want to remove the rotor, but I am not sure how to and need some help. As you can hopefully see on the photo there are 2 screws. The left one has two positions, the right one looks like a regular screw. I have tried turning the right one, but it does not give even after using more force than I would expect. Anyone know the function of the left screw with the two positions and how to remove the rotor? Thanks!!
×
×
  • Create New...