Jump to content

New case for AS1674


Recommended Posts

ebay purchase movement, which is OK, except the second hand post was missing. Probably why sold as spares or repair. Also have found one of the dial screws is missing  

 

 

1IMG_3725small.jpg1IMG_3723 small.jpg

 

 

Fortunately tracked the movement down on www.ranftt.de and then on www.oldswisswatches.com, and tracked the movement down as an AS1674 and luckily found the part on ebay (the part cost more than the movement!!)

 

 

1IMG_3729 small.jpg

 

Case will be 3 pieces: case back with movement holder, case body with lugs, and bezel. Raw materials;

 

 

 

1IMG_3793material.JPG

 

Case back with movement holder in brass. 2 pieces of 3mm brass sheet to get the thickness

 

 

1IMG_3621 case back.jpg

Case body will be steel tube, with brass lugs silver soldered on. Plan  to blue the case body to see how it looks against the brass. Bezel will be polished mild steel

 

1 case body.jpg

 

The picture just shows the second hand post in in place and movement seems to be working fine (not cleaned)

 

1IMG_3760 small.jpg

 

Left to do is bezel, dial, dial markings, hands, glass and crown - fingers crossed!!

 

 

 

  • Like 5
Link to comment
Share on other sites

You have the patience of a saint and the hands of a master craftsman.

I'm not easily impressed, but this is so far over the top, that bluing just "pops" off the brass, solid movement as well.

You should (and will) be proud of your work and skills, Top Drawer!

Dave

Link to comment
Share on other sites

Hi Watchtime, yes it is heating polished steel. It is not permanent so not really suitable for a watch case, but this is playing. Towards the end of the project I will spray with laquer to see how that improves the durability, and also it will help seal the brass

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

A bit more progress. Should be able to get a few more hours this weekend to get the hands finished

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.jpg.12ad89ef476997504136db5c63157214.jpg5.jpg.7bdebe9057f9ea8c62406da79ab6659a.jpg6.5.jpg.259e4a2ed5b9c1a751f1bdfdf5478ceb.jpg6.jpg.d38a6caa7f8e98edf9a3c0b11235d2eb.jpg8.jpg.ca48e3b39c88336225d595bfe92daaa8.jpg10.jpg.58c417152d7df692a938f07ddf64ecad.jpg11.thumb.jpg.09ef39b1cf586bc7a7e10235b0d9386b.jpg12.jpg.6d5ded08369709c9ffc752cfcd39ef04.jpg13.jpg.7c9f9b0dc6742e4c2f3e721cffa816a5.jpg14.jpg.0da13de9b54ad798e58067c6dd7e1a14.jpg15.jpg.7b53a6b3db5bdaece39ce74ad58b8a0f.jpg8886.jpg.c2f55ddaf5bf630a6e6ffaf5cb32b473.jpg8887.jpg.4da33b160b49c031443e298070648c25.jpg8888.jpg.0c64fe9bcc7e5f53b4d12d771c1dafc8.jpg9911.jpg.ec8e24a83608cd282278202c0408dfaa.jpg111111.thumb.jpg.627f242cd525da2be01460c4fda64ddc.jpg

Edited by Michael
pictures all loaded twice
  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

This project has got to the stage where I am getting glad it is over. Anyway, crown made, parts sprayed with clear laquer, acrylic fitted and strap fitted. A few other problems I had to deal with to get the watch keeping regular time. The watch now keeps good time and I will regularly wear it and see what snags come up (which I am sure they will !!)

58b206963b926_IMG_4020small.jpg.f744403d830fd2035b0988bb7a4aaba7.jpg58b2069b9905a_IMG_4018small.jpg.d0fad549491cfe23090a85c74ddc2ef1.jpgIMG_4031small.jpg.d0dd210d8424722acd8e23d8536750ac.jpg58b206a1bf156_IMG_4016small.jpg.0f37936852587460cba28e7468c1d1de.jpg

  • Like 7
Link to comment
Share on other sites

  • 2 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • glad it worked out, those ESA movements are obsolete but new old stock is still out there, now that you know the make/model you could also do a cross reference to see if something more current would line up with the dial feet and hands...for future use if needed 👍
    • I wish they would have done so in this case. The whole story went like this: I sent my speedmaster to an omega service center about 10 years ago (at that point of time I haven't even started watchmaking). After the watch came back to me it had only about 6 months wristtime until january 2024 (not fair for this nice watch but the other pieces of my collection want wristtime too 🙂). So my conclusion is that the barrel was already faulty when it came back from service, can't imagine that amount of wear in 6 months wristtime. In january 2024 the performance on the wrist was quite bad, so I decided to have a look by myself. I have to admit that I didn't check the barrel close enough as I thought it must be ok, couldn't have issues after official omega service. That was a mistake, I will learn from that. Follow the golden rule: Nothing is certain except death and taxes.
    • I am same as you oldhippy I won’t touch anything with a battery, I keep getting requests to but I just say I only do mechanical clocks, there are quite a few errors & omissions with the repair guide have a look at this. https://mb.nawcc.org/wiki/Encyclopedia-Subjects/Torsion-Clocks/Book:Horolovar-400-Day-Clock-Repair-Guide-10th-Edition-Errors-and-Updates
    • Nice experiment. As it will be no problem, please put a twice less mass (half of the two penies) and read the amplitude, will be interesting. I mean to determine what is the relation torque/amplitude.
    • parts touching that aren't supposed to touch definitely would cause an issue. there not supposed to be touching there supposed to be independent which means that @VWatchie is correct that the ratchet wheel has no effect on performance. so if the ratchet wheel in your particular case is touching that is definitely going to be an issue and needs to be addressed. did you know that the Swatch group service centers do not change mainsprings? Swatch group service centers have an infinite supply of spare parts so they just change the mainspring barrel the whole thing. Plus anything else the watchmaker doesn't like just gets replaced like anything related to the escapement they just replace the components because they can.
×
×
  • Create New...