Jump to content

Rolex Real or Fake


Recommended Posts

Man if that was an Omega Constellation I would chime right in...:)

The bezel colour and finish look to be very poor quality...almost garish for a Rolex. But then I have only ever seen pictures of a Rolex and never had one in hand... also on the underside of the top link of the bracelet the finish looks very rough and course. Need a better front shot to asses the dial better...Also  the finish on the bracelet is again very course, although the bracelet could have been changed. It almost looks like the lume pip for the bezel is not centered on the triangle?? perhaps the angle of the shot...or not...

Something about that bezel...is the center tine of the Rolex crown in line with the 12 marker triangle?

I say fake, but only going by a poor picture and no experience and the fact that there are more fake Omega's and Rolex's than there are the real thing.

Of course opening her up will tell the tale :)

Ron

  • Like 1
Link to comment
Share on other sites

Hmm lets see, well there's just nothing  right  about it what so ever, it's a complete turd. Bezel from a GMT incorrect, date window magnification way off, hour markers wrong, dial wrong, I think your having a laugh :D 

  • Like 2
Link to comment
Share on other sites

I think I do have the answer. The strap is a Walmart special :) The Rolex strap is missing a connecting link ( to be purchased). This watch was picked up in Egypt by a pilot friend of mine. The average Joe would do not know it is a fake. It actually has the weight and feel of an original.18b953786973214334969e1b1233bec6.jpg


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

In an effort to combat fakes, more than a few years back Rolex started putting engraved "Rolex" inside the dial, around the rim above the dial, one quick way to tell... even then the fakers quickly came up with that same look. Dials, hands, crystals and even weight are a quick way to tell, if it doesn't look or feel right, probably isn't, also Rolex has their own brand/blend of stainless steel,(not like 316L) I read somewhere, that won't discolor when polished, usually the stem will break on copies if unscrewed or the date wheel will break, not worth much effort for parts, IMHO.

20 hours ago, wls1971 said:

it's a complete turd.

Agreed, there are better fakes, Complete turd!:biggrin:

  • Like 1
Link to comment
Share on other sites

In an effort to combat fakes, more than a few years back Rolex started putting engraved "Rolex" inside the dial, around the rim above the dial, one quick way to tell... even then the fakers quickly came up with that same look. Dials, hands, crystals and even weight are a quick way to tell, if it doesn't look or feel right, probably isn't, also Rolex has their own brand/blend of stainless steel,(not like 316L) I read somewhere, that won't discolor when polished, usually the stem will break on copies if unscrewed or the date wheel will break, not worth much effort for parts, IMHO.

Agreed, there are better fakes, Complete turd!:biggrin:


I'm glad I did not buy it :). It was a gift for fixing his other fake.3a9e964fdf6814dab0ae6674baedaaa6.jpg


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I personally have not got any problems with fakes/copies providing they are sold as such. It's when they are sold as genuine that is the real issue for me. As far as repairing I avoid and refuse to touch them. What worries me is after the repair and it is then sold as genuine am I then party to the fraud ?

  • Like 3
Link to comment
Share on other sites

I personally have not got any problems with fakes/copies providing they are sold as such. It's when they are sold as genuine that is the real issue for me. As far as repairing I avoid and refuse to touch them. What worries me is after the repair and it is then sold as genuine am I then party to the fraud ?


My main concern with a service of this watch is that, if I pooch a part i would not know how to get a replacement as I really can't identify the movement.

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ok thanks Ross, I will give that a try!😁
    • Welcome my friend. 
    • Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
×
×
  • Create New...