Jump to content

Recommended Posts

The first blade is for sure not shapened with a hollow shape, but it has a to hardened tip with brittle metal, one can se it flaking away which isn't good.
In my book to get a really nice surface one can use both of these sharpeners with the horotech style one just must get it to fit good in the toolholder.
Swisstech makes a similar one with a bunch of inserts so you always will get the perfect result, and fast, but always with quality the price is a downside. Sharpener.thumb.jpg.7710fee293899b0365a2466524b7face.jpg

A screwdriver with a softer tip, like the one below made of berylium is almost impossible to get perfect without a good sharpening tool.

Gold_Tip.thumb.jpg.6e12fa76bdd7a0ca7ee5d83010eb1efa.jpg

And in the end it's like with racing with cars, a good car will take you a long way but it's the man behind the screwdriver that makes the difference ;)

Edited by HSL
  • Like 2
Link to post
Share on other sites
  • Replies 184
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I spent the day literally watching paint dry. I was using black lacquer to fill in the engraving on a pocket watch case to make it stand out. I will send pictures when it is finished. In the mean

This should put your mind at rest. Click on this link. http://members.iinet.net.au/~fotoplot/sdriver/sdriver.html  

Like others on here I don't restrict myself to just one set of screw drivers. I have one set ground to a thinner profile, and another set ground to a slightly fatter profile. I also have numerous scre

Posted Images

To me, the OP blade are not hollow ground.

As such he'll not need to buy an expensive tool like that at this stage of the learning process.

Regards

NAD


Sent from my moto g(6) play using Tapatalk

  • Like 1
Link to post
Share on other sites
On 5/15/2020 at 5:08 PM, nad said:

To me, the OP blade are not hollow ground.

As such he'll not need to buy an expensive tool like that at this stage of the learning process.

 

blade.jpg.21076a2e3d924b5cd2e34d78c7981da5.jpg

 

Now do you see the hollow? I didn't suggest that OP should buy the "expensive" tool But that when sharpening on a stone he would have to remove the hollow and that it would be better to use a new (cheap) blade. Please read the original post before posting negative comment.

 

 

 

Link to post
Share on other sites

My friend, I see nothing negative about my comments.

If the observation that I, and others have made, that the OP blades are not hollow ground are at odds with your view, then it doesn't make it a negative comment.

I politely request that you just agree to disagree and draw this thread to a conclusion.

Sent from my moto g(6) play using Tapatalk

Link to post
Share on other sites
On ‎5‎/‎13‎/‎2020 at 1:34 AM, Watcher said:

Your blades have been hollow ground on a tool like this.

sdt.jpg.f5d679d25c565adf29658fe60743a33c.jpg

If you use the tool illustrated by nad you will have to flatten each side of the tip. You should replace the blades or buy the hollow ground sharpener.

    good show

Link to post
Share on other sites
  • 2 months later...

The best way I found to sharpen  screwdriver tips is to use a sharpening fixture. They are relatively inexpensive and will precisely hold an angle. Watches are easy to damage due to the small size of the parts.and having the correct tools can greatly reduce the chance of damage.  Of course there is always the exceptional genius who can repair anything with a broken hacksaw blade and a potato scraper but reality favors having the correct tools. 

david 

Edited by david
removed a superfluous word
Link to post
Share on other sites
2 hours ago, david said:

The best way I found to sharpen  screwdriver tips is to use a sharpening fixture. 

I think that a rolling fixture is useful only when making the blade from a blank. Othewise two strokes per side on an aluminum oxide do for me. I let the flat guide itself  and slide in one direction only. . Of course the smaller the driver the less tactile feedback.I hqve one screwdriver holder with an embedded oxide strip and find it extremely handy. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Yes it can;  perhaps impulse jewel can't enter the fork horn, if the shock has  knocked a pallet jewel out of alighnment or bent a pivot. Remove the two black screws then the automatic device, loosen the cock screw by couple turns, raise the bridge just enough to pass the impulse jewel over the fork so to get impulse jewel inside the horn, tighten cock screw. It will run, however , might get stuck again if pallet jewels have got misaligned or a pivot has got bent.
    • A little uninspiring.  It does run though...kinda.
    • I decided to find a knew winding pinion for my Vulcain.  I see some wear on the one I have.  I have the spec sheet on the Vulcain 120 and identified the part as #1246.  I searched around and found scotchwatch.com had one.  $45.  I really want it, so I bought it.  Meanwhile, I continued my search and found a part with a different part number (410) on Northern Watch & Clock Supplies in the UK.  It was just a couple of pounds, so I bought it. Later I looked at the invoice from scotchwatch.com and see that the part I bought is 1246 (410), so I think the part has two numbers.  Well, we will see when they arrive.  On part cost 20x the other one.  I am not complaining...as I am glad that someone takes the effort to maintain an inventory for budding watchmakers like myself.  I just think it is interesting. Learning new things every day.
    • Thank you for your introduction and welcome to this friendly forum. A nice looking watch you are wearing. 
    • The hairspring is partially blocked from view by the autowinder but looks to be ok.  The balance swings with a puff in one direction but not the other.  Could it be the position for the impulse jewel and fork?
×
×
  • Create New...