Jump to content
  • Similar Content

    • By PaulnKC
      All,
      I am very nearsighted (between -6 and -7 in both eyes). With astigmatism. Now, in my late 50's I also have significant nearsightedness.
      I thought a flip up visor - which I could wear with my glasses would be best. I purchased an OptiVisor with a flip-down loupe. But not happy at all with the visual quality.
      I know you get what you pay for in optics. What is the best type of device for someone with old-bad eyes.
      I have never used a regular loupe - but thinking that may be the way to go. Any of you guys (or gals) have a reccomendation?
      -Paul
    • By rduckwor
      If this is inappropriate, please delete the post.
       
      I have an acquaintance who is closing his shop due to health after 43 years.  He has a large quantity of parts, stems, crowns, crystals and all the paraphernalia one would accumulate after a long period in the business.  He needs to liquidate his shop.  This isn't a "Hey do you have a __ for a __." kind of post.  We're talking serious stuff here.  Mass quantities.   If you need parts, equipment, etc. for your practice, please let me know.  I will pass along his email contact  to you.  Obviously, this is useful primarily only to those in the U.S. due to shipping costs.  But he has a huge amount of useful goods and is 100 miles South of Atlanta.  PM me if you need something.
       
      Thanks,

      RMD
    • By BrianG1
      Hi, I have a few bits and pieces, and clocks. And I am very interested in horology tips, conunundrms etc.
    • By marcoskaiser
      Would it be interesting for this forum to set up a list where we could exchange things like parts and tools?  I happen to have duplicate tools from my lot purchases, and feel that those could be better used. No money involved. Would that be feasible?
    • By Lenj
      Hi,
      Has anyone got one of these lathes?? if so are they any good for repairing pivots etc..I know they would not be any use for heavy work, but thought I would ask first..
      Have a good weekend all..
      Thanks Len


  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Hello - I have Tag Heuer F1 Chronograph ca1212-ro, which I've had for many, many years.  Recently I noticed a pusher "cap" had come off and was lost, I have sourced an new pusher, and have removed the movement but am at a loss for how to remove the pusher from the case???  The new pusher is not threaded so I'm assuming the old one is not either - assuming the pusher I was sold is correct.  Are the pushers a o-ring press fit, are they "glued" in, how are they removed and reinstalled?  Any help is greatly appreciated!  Thanks - Nick
    • It would just be a video of me poking and prodding for hours I'm afraid. But the basic procedure for me is, move the index right next to the stud holder, and rotate stud so that the hairspring at this point is centered in the index. Then I move the index little by little away from the stud. If at any point as I'm advancing the index I see the hairspring start to deviate from the center of the pins I back the index up and either tighten or widen the curve, checking the curvature by moving the index over the problem spot after every manipulation. I keep doing this until I get to the dog leg and now I have a perfectly formed end curve. Next is to just fiddle with the two bends at the dog leg to get the collet to center on the jewel. Also check constantly that the collet isn't sticking to the cock by tapping on the cock whenever you are checking your work to make sure the hairspring is in its fully relaxed state. I don't have any special techniques really. It's basically just time and patience. Feel free to ask though if you want me to be a little more specific about anything.
    • Now that this project has been completed, I hope that some of you might be inspired to pick up a scroll saw and try out this craft. Its not hard, just tedious and repetitive but you can make some beautiful pieces of art and there are all kinds of patterns out there for everything one could imagine. This clock is not difficult at all, there are clocks that take guys months or even years to make. Cherry tree toys has the most awesome patterns I've come across and Berry basket has some simple yet beautiful stuff, in fact this clock is from a pattern by Cherry tree toys. https://cherrytreetoys.com/scroll-saw-patterns/ https://www.berrybasket.com/
    • I second this approach.  I'll just add heat can also be used to break down the superglue.
    • I find Seiko HS manipulation to be very difficult. When you have a chance, why not posting a video to show your technique to others. 
×
×
  • Create New...