Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By PaulnKC
      All,
      I am very nearsighted (between -6 and -7 in both eyes). With astigmatism. Now, in my late 50's I also have significant nearsightedness.
      I thought a flip up visor - which I could wear with my glasses would be best. I purchased an OptiVisor with a flip-down loupe. But not happy at all with the visual quality.
      I know you get what you pay for in optics. What is the best type of device for someone with old-bad eyes.
      I have never used a regular loupe - but thinking that may be the way to go. Any of you guys (or gals) have a reccomendation?
      -Paul
    • By rduckwor
      If this is inappropriate, please delete the post.
       
      I have an acquaintance who is closing his shop due to health after 43 years.  He has a large quantity of parts, stems, crowns, crystals and all the paraphernalia one would accumulate after a long period in the business.  He needs to liquidate his shop.  This isn't a "Hey do you have a __ for a __." kind of post.  We're talking serious stuff here.  Mass quantities.   If you need parts, equipment, etc. for your practice, please let me know.  I will pass along his email contact  to you.  Obviously, this is useful primarily only to those in the U.S. due to shipping costs.  But he has a huge amount of useful goods and is 100 miles South of Atlanta.  PM me if you need something.
       
      Thanks,

      RMD
    • By BrianG1
      Hi, I have a few bits and pieces, and clocks. And I am very interested in horology tips, conunundrms etc.
    • By marcoskaiser
      Would it be interesting for this forum to set up a list where we could exchange things like parts and tools?  I happen to have duplicate tools from my lot purchases, and feel that those could be better used. No money involved. Would that be feasible?
    • By Lenj
      Hi,
      Has anyone got one of these lathes?? if so are they any good for repairing pivots etc..I know they would not be any use for heavy work, but thought I would ask first..
      Have a good weekend all..
      Thanks Len


  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • hello to all, Does anyone know when lesson 4 will be open for enrollment? I cant find any info on the WR website about it.
    • Actually that is not true. If the slot is wider there will be no full contact between driver blade and screw, but there will be two shorter points of contact, since these are parallel to the axis of the blade they  not tend to lift the tool, which is good. In addition there will be some friction between the tip of the blade, and the bottom of the slot. As a result, he screw will be driven properly. Compare to a wedge shaped (aka flared) driver. In theory there are always two thin strips of contact, which are as wide as the blade. The down side is that the blade tends to cam out because there the surface asre not paralled are inclined, and there is no friction contact to the bottom. Parallel tip drivers are also somehow common in general mechanic, from small to big sizes. These are usually considered better, and are more expensive.  In the comments of this article https://www.cnccookbook.com/8-brands-to-consider-for-the-worlds-best-screwdriver you can read about paralled, plus JIS and Pozi cross types, which are unknown to many.
    • Send it to replateit.com in Canada. Wonderful work. They know omega. Theyve done dozens for me so far.
    • Glad to be here....
    • Suggest that you post in the correct forum which is "watch repair help" or perhaps "chat about watches", because not everyone reads all sections. You can also ask moderator to move you post.
×
×
  • Create New...