Jump to content

Waterproof or not ?

atimegoneby
 Share

Recommended Posts

atimegoneby Super WRT Addict

atimegoneby

Posted
Posted

I've just had one of those pop up ads appear on my screen for a Seiko 5 green dial model snk805k2 special price £55.99, on Amazon

reading through the garb it says waterproof to 30 metres/98.7 feet then goes on to say not suitable for swimming, snorkelling, water related work, etc ???

just wondered which is right  :huh:

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted

Waterproof is an interesting term and I was under the impression it was largely abolished replaced with Water Resistant. But googling I see that is still being used? The reason why it was supposed to be abolished is waterproof implies an absolute which is basically almost impossible.

So a couple links Casio has a nice chart showing the varying degrees of water resistance. Another link explaining some of the standards.

Then there's another problem with water resistant watches not often mentioned. Specifically time and temperature changes especially if you can repeat this on a continuous basis. So if you can heat the watch up like hot shower for instance hot tub the air inside will expand a very small amount. The watches designed for external pressure not necessarily internal pressure. Problem with temperature change is the air will expand in the watch when it's warm attempt to return to its normal volume when it cools down with time that repeated pressure vacuum even it's a very tiny amount will slowly pull water past the gaskets.

http://www.casio-intl.com/asia/en/wat/water_resistance/

https://en.wikipedia.org/wiki/Water_Resistant_mark

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Incabloc Lyre Spring & Low Earth Orbit

      By Neverenoughwatches · Posted

      Instead of using tweezers, put a piece of rodico onto a toothpick or pegwood. Then set your spring to the rodico, this way the spring is not under any tension when floating it back into the bloc. As you bump into the bloc when trying to find the entrance the rodico will give but still holds onto the spring ie. You wont have the rigidity of tweezers.
    • Neverenoughwatches
      What are these Seitz B-Jewels?

      By Neverenoughwatches · Posted

      If frank says these bombè jewels are for balances and similar pivots then they are used cupped side facing the pivot and then capped i assume. In Nicklesilver's reply i guess that cup can also be reversed and used as an oil reservoir leaving the shoulder riding on a less frictioned domed surface. 🤷‍♂️ Hence the use of them on wheels closer to the escapement that have less torque requiring efforts to reduce friction and are also uncapped.
    • Neverenoughwatches
      Commando special

      By Neverenoughwatches · Posted

      Looks that way, if it had any amount of significant jewel count it would say so on the dial.    Looks that way, if it had any amount of significant jewel count it would say so on the dial.  Same answer as Mike regarding the dial, its often just a slapped on name of a retailer but i thought you were way above this understanding Pete ?
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Light naptha is what you need to be looking for. The carbon to hydrogen ratio is high with heavy naptha, it doesn't evaporate as well as light naptha and is prone to leaving more residue. Try tom's suggestion of the mirror test.
    • Neverenoughwatches
      I'm going to be setting up a decent little workshop here at home.

      By Neverenoughwatches · Posted

      Its a big item Michael and a lot that could go wrong with the process of getting it to its new location. I once helped install one of these units into a conservatory that i had built. It was big and bloody heavy and took six of us to get it in safely. If you have sliding doors and you need to remove the whole frame then that may or may not go well. But i would advise getting a professional in if you have little knowledge on the installation of them. The glazing of the doors could well be 6mm laminated glass which again will be heavy very heavy if the glazing units are big. The glass would also need to be set up and packed correctly to open the doors properly more so if they are unframed and the sliders are upvc. Seems a shame but if no one is biting and that may be due to having no warranty i guess the only takers might be someone that installs them for a living and knows how to repair. If its fibreglass just be careful, i sometimes have to cut fibreglass baths out and they are nasty to work with . Thick gloves are definitely recommended,  not fun picking out fibreglass spells two days later that have started to go septic. Good luck with it all matey.
×
×
  • Create New...