Jump to content

Allow Me To Introduce Myself My Name Is

Jimbayliff

By Jimbayliff
in Introduce Yourself Here

 Share

Recommended Posts

chriseames168 WRT Addict

chriseames168

Posted
Posted

Hi not sure if any one will help as I have got a very old clock here in front of me waiting for your help,know it is for watch lover this place but do not no any one to ask,when I got the clock it did not work or chime,but now I have got it working chiming at correct hour,but I cannot get it to keep good time when I got it working It lost 1.71/2 hours a day but now I put a new spring on the pendulum and oiled the pivot holes now got it down to 25 minutes a day so then turned up the pendulum but now cannot turn the screw any more so now do not no what to do next can any one help me,thank you

Link to comment
Share on other sites
chriseames168 WRT Addict

chriseames168

Posted
Posted

Hi not sure if any one will help as I have got a very old clock here in front of me waiting for your help,know it is for watch lover this place but do not no any one to ask,when I got the clock it did not work or chime,but now I have got it working chiming at correct hour,but I cannot get it to keep good time when I got it working It lost 1.71/2 hours a day but now I put a new spring on the pendulum and oiled the pivot holes now got it down to 25 minutes a day so then turned up the pendulum but now cannot turn the screw any more so now do not no what to do next can any one help me,thank you

Link to comment
Share on other sites
atimegoneby Super WRT Addict

atimegoneby

Posted
Posted

Hi Jim, if you've replaced the suspension spring check that it's the same length as the original, if it's longer that would do it, otherwise if the pendulum rod is at the end of its adjustment it normally means that the pendulum is too heavy, try changing it for a lighter one, hope this helps, Phil.

  • Like 2
Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
Posted

,and my name is Christopher thank you.

 

Hi Christopher, I think he called you Jim as it is Jimbayliff who started this thread ;)

 

To confirm: If you are starting a new topic then it's best to use the "Start a new topic" button which shows at the top of all the forum sections. I think you mistakingly clicked "Reply to this topic" hence the confusion ;)

Link to comment
Share on other sites
atimegoneby Super WRT Addict

atimegoneby

Posted
Posted

Hi Christopher, sorry for the mix up, Smiths used several types of pendulums according to the movement used and the age of the clock but you should be able to modify the one you have, it sounds as if you need to raise the height of the bob, you could either just put some spacers under the knurled nut or cut some more thread onto the rod to give more adjustment, also make sure the clock is ''in beat'', Good luck , Phil. 

Link to comment
Share on other sites
chriseames168 WRT Addict

chriseames168

Posted
Posted

Hi Phili,I have got spacers on the bob,if I change it the clock will not keep in beat like you say,as I got now it is keeping perfect beat with no problem,it is just the time keeping as I said I have tried lighter pendalums and it will not go I have tried adjusting it to it but it just with not work,i have tried lighter pendalum,but I have noticed when it is a wormer day it does run faster.thank you again for your help,I have been on this clock for about year I can say Maybe the main spring needs a new one maybe the spring is not on hard so is is slower so needs a new one I understand this is not a safe job to

Link to comment
Share on other sites
chriseames168 WRT Addict

chriseames168

Posted
Posted

Hi again,just thought about what you said and I put two spacers on on pendalum,I tried one and it make it much better so then after reading your mail I put a spacer on the offer end to take the middle out and it has had it very mush better,it is still losing about 5mins a day,I thought about adding more spacers,to correct it more,can I ask why it is so much out,can you help on more info abou it

Link to comment
Share on other sites
atimegoneby Super WRT Addict

atimegoneby

Posted
Posted

Hi Christopher, the pendulum is probably not the original to the clock so it will be a case of adding more spacers, with trial & error you should be able to get it right, if you back off the knurled nut slightly it will give you some reserve adjustment in case you need it later on for fine tuning, hope this makes sense, Phil.

Link to comment
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Jon
      Main spring

      By Jon · Posted

      I would go for the dearer spring. You won't need to remove the spring from the carrier ring and then use a mainspring winder to get it into the barrel, for a start. Also that spring is closer to the needed dimensions, especially the length. The length plays a part in the mainsprings strength. If you double the length you will half the force (strength) of the spring and vice-versa. A spring with 20 mm less length would be about 7% shorter, so technically would be 7% more strength, but I find halving this number is closer to real-world findings, so the spring would be about 3 to 4% more strength/force. On a mainspring that ideally kicks out 300 degrees of amplitude, a 3% increase in amplitude would be 309 degrees. Increasing or decreasing the length of the mainspring will affect the power reserve to a greater or lesser degree. It depends how much shorter or longer it is.
    • Malocchio
      What tools does ebay have to offer this week.

      By Malocchio · Posted

      I recently bought this but not on ebay. I figured if I want something Japanese I better check Japanese auction sites since these don't seem to pop up on ebay. I paid 83 € plus shipping & taxes. I think it was pretty reasonable for a complete set in good condition.
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Did you take the friction pinion off the large driving wheel and grease it? Although, now that I think about it, that shouldn't have any effect on the free running of the train if the friction pinion isn't interacting withe minute wheel/setting wheel...
    • DDean
      Incabloc Lyre Spring & Low Earth Orbit

      By DDean · Posted

      I did in fact use Rodico to get the spring into general position and "hold" it there while I used a fine oiler to make subtle positional adjustments.
    • Neverenoughwatches
      Main spring

      By Neverenoughwatches · Posted

      The two measurements of particular importance wound be the height and the strength,  the length would obviously correspond with the increase/reduction of half mm of barrel diameter. There is a big difference in price considering that the more expensive one is the shortest. The longer one might be ok ? But then it is taking up more room in the barrel, might it effect the unwinding ? I wouldn't have thought so for just that small amount.  Ideally a pro might reduce the longer one to suit. But there is some information that might help, do you have the one that was fitted to measure up, though not necessarily the right one.
×
×
  • Create New...