Jump to content
Geo

No sales forum rule.

Recommended Posts

A number of other watch sites have adopted a minimum post rule before a member can participate in the associated sales forums. It's usually a minimum of 50 posts. I used to wonder at the logic of such a requirement and originally assumed that it was for the protection of the members from predators just wanting a quick sale. I'm not so certain any longer. After mostly lurking on another board for several years and observing the watches being offered for sale by some totally unscrupulous members, perhaps that rule is in place to protect the new members from the old ones. At any rate, I'm totally appreciative of the lack of a sales forum on this site. Bravo!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Hi guys, I have a problem setting the time with this watch. The first time around, the minute hand goes around ok, the second time it stops at around 10 to and wont go backwards or forwards. It just sticks there. If I push the crown back in the watch works fine and when the minute hand gets past this point, I can then pull out the crown and move the hands again.  Can anyone shed some light on this?
    • If you are in no hurry I could stripp one keyless down and make a small tutorial of it.  I seldom use the Moebius 8000 anymore but put it on at request   If one would buy some luricants and don't bother  about the mainspring it would be a setup like this.. Fine oil Moebius 9010 - On the escapement parts (It's here you can use Moebius 8000) Thick oil Moebius HP-1300 On the most other parts which needs to be lubricated  Grease Moebius 9504 Like on the winding pinion and so on.. Special for pallet stones Moebius 9415.  
    • Okay, I made a bit of time to get this project moving forward, it may take me a year at this rate. I had to get another cylinder as the original had all the pins bent. As you would expect nothing fits, therefore I had to bush the new cylinder to fit the shaft. I also had time to polish the fly and rebush it. A note, I added a photo of getting it level for those new to clock repair (horizontal and vertical) as these are long pins and if off a bit forget about them working smoothly. 
    • Thank you for your introduction and welcome to this friendly forum.
    • A faceted crystal has ..faces but not a lip. Seiko did not use glue often, and the crystal will not leave by pushing with a thumb. Fortunately, Seiko helps watch repairers by classifying and documenting the case construction, here we have an "A" as stamped on the case back. Attached the guide. A good discussion is at https://www.plus9time.com/seiko-case-back-information BTW, I recommend the OP to use the "Watch Repairs Help & Advice" section when it's repair question like this. One advantage is that there answers can be rated and marked as resolving.   1982.03 Seiko Case Servicing Guide.pdf
×
×
  • Create New...