Jump to content

Introduction

stoli67

By stoli67
in Introduce Yourself Here

 Share

Recommended Posts

stoli67 Member

stoli67

Posted
Posted

Hello all,

 

My name is Andrew and I am from Sydney.  I have recently started disassembling a couple of watches and have found it quite relaxing.  I thought that I had better register here as I had a few questions.

 

Such as... how do you get the jewel out of the metal part of the incabloc once you have undone the spring and removed it ?

 

 

Andrew

Link to comment
Share on other sites
anilv Distinguished Member

anilv

Posted
Posted

I've had some where the lighter fluid did not work. What usually does the trick is the ultrasonic cleaner.

In the absence of an ultrasonic cleaner, boiling the jewel assembly in plain water works as well (I have done this) but make sure you can spot the jewel again..some watches like Longines use transparent jewels which will be impossible to find in clear water.

A jewel setting is fairly robust and boiling it would not hurt as long as you don't dunk it in cold water immediately.

rgds

Anil

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

Hi Andrew & welcome. The easy & safe way to  remove the jewel from it,s setting is to release the shock spring & then use "Rodico" to lift it out. I suggest you watch some of Mark,s vids on youtube to get a feel for how to work on a watch.

Enjoy.

Link to comment
Share on other sites
vinn3 Distinguished Member

vinn3

Posted
Posted

welcome to the forum Andrew !  a small utrasonic cleaner is GOOD  Just big enough for a pocket watch.  i have used them often,  BUT with  various solvents.   water or soapy water - i have learned something here today.     Vinn

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome Andrew! I also find it relaxing to take them apart...the stressful thing is to put them back together specially when they are not your watches!! :)

Yes, the jewels come out with rodico. They will stick to it. An example of things you don't ask but nevertheless are valuable to learn is boiling the jewels: Thanks Anil!!!

Cheers,

Bob

Link to comment
Share on other sites
stoli67 Member

stoli67

Posted
  • Author
Posted

Ah yes.... just found that out..... lost an incablock spring..... I thought that they were hinged and could not fly out..... Not So!

 

I then spent a long time looking for said spring before ordering one that I think is the closet on the Incablock site.... that watch is quite old so no part numbers!

I took a photo with a 1.2 mm screw driver then blew the image right up and measured the spring against the screw driver and decided that it is a 170.03

Fun Fun Fun..... I hope that the new part fits.

IMG_2593 (002).JPG

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

Hi Andrew,

Next time when releasing a shock spring I suggest steading the spring with a piece of pegwood so it does not fly. Fitting a new spring is not easy and takes a lot of practice. May I suggest that you get some really good magnification for the job & some do this job with clingfilm over the working area to catch it when it springs away.
See below some info on the little blighters:

 

Shock springs.pdf

 

KIF shock springs.pdf

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Andrew and welcome.

Welcome as well to the flyaway club, its one of those topics that we have all posted about at some time or another. I use the pegwood method but there have been some ingenious suggestions through the years, even one chap working with his hands and watch in a plastic bag !

The irritating thing is that the bit usually turns up when you dont need it anymore !

Cheers,

Vic

Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

Yes I had that just last week click spring went flying when putting it back spent half an hour on my knees with the old trusty magnet then Eureka I found it. But alas no it was one I lost about 2 months ago from a Helvetia ah well at least I have a Helvetia spare I'm sure it will turn up the next time I'm on my knees :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Down the rabbit hole!

      By RichardHarris123 · Posted

      Well done, let us know how you get on with the citizen. 
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • oldhippy
      Without Our Forum

      By oldhippy · Posted

      This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • fnick
      Down the rabbit hole!

      By fnick · Posted

      Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...