Jump to content

Excited - re-assembled my first watch and it is running.


Recommended Posts

Congrats. Looks like it has good amplitude, but can you take pics on the timegrapher or equivalent application? That will tell if the watch is running properly.

Edited by jdm
  • Like 1
Link to comment
Share on other sites

Ah there's nothing like your first. Good job my man keep it up it looks to be running well. Do you own a timegrapher yet it will help a lot with regulating and help with fault finding. But with the amount of oil you bought I should let your funds replenish unless of course money is no object in which case get one ordered:D

  • Like 1
Link to comment
Share on other sites

Great job! Remember to buy the timegrapher, the staking tool set, the jeweling set and the escapement tester. Do not waste your money on cheap, disreputable tools, buy witschi, Bergeon, Seitz, and Bergeon respectively....It is only a few dollars...like US$10K....more?

PS. I have to make a living somehow, remember to tell them I sent you!!! :D

Cheers,

Bob

PS2. No, seriously, great job and just have fun!!

I remember my first one: I was so happy then, I threw away my only time keeping devise I had before: a solar alarm clock. You know, the one with the blade sticking up...in the garden... always making this sound in the morning: cock-a-doodle-doo, oh well! :D

 

  • Like 1
Link to comment
Share on other sites

Sometimes not having a timegrapher is a blessing. It's fine if you trying to find/diagnose the problem but you will waste a lot of time trying to nail down that last bit of accuracy..getting it perfect. Most watches run ok enough. Give or take a minute or two a day.

A watch would have been a good runner 40 years ago but there will be wear and you have to accept that unless you are prepared to change all the wheels other stuff. Positional accuracy is especially tough to get right.

Sometimes ignorance is bliss.

Anil

Link to comment
Share on other sites

Congratulations from me as well, I stripped and reassembled my bro in laws watch as my first, it was not so much excitement as sheer relief that it worked, it was just gummed up really and needed a service. I was lucky it kept good time as well.  

I have since acquired the timegrapher and spent quite a bit on tools as well but sometimes I just like to look at them and clean them a bit - oh dear that sounds  weird, but tools are great.

Cheers,

Vic

Edited by Vich
Forgot why I did it
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...