Jump to content

Hello from South Wales.


Recommended Posts

Ive just joined after watching many of Mark's excellent videos on Youtube. They have taught me many things and reminded me of many I had forgotten...

I'm now 55 and slowly getting back into watch-repair. When in school at age 12 or so I used to mess around repairing, and by age 16-17 was OK-ish I thought, even tackling an Omega 861 with complete success. I would never contemplate doing one now however!

I Thought at the time that there was little future in watch-repairs as the Q revolution had taken a big hold so went into electronics repair instead I was pretty wrong!.....

Is the age of 55 too old to get back into this?--I dunno maybe, but with lots of loupes and glasses plus a £5 microscope from ebay I manage--so far!

I'm particularly into Accutron Tuning-Fork types and have a number of 'Vicims' I have four 214, four or five 218's, and a couple of 219's most running well

Recently Ive aquired a couple of ESA 9162 types One of these, a very poor Tissot looked as though it had had a very hard life and was used as a donor for others--Even the bezel is missing from the case, Both coils faulty, missing hour-wheel etc, Very sad condition but does have a nice blue dial.

I managed to fix the coils, (the windings themselves were good, or I wouldnt have stood a chance.) The TR coil had a broken transistor and the RC had a high value resistor (4M8 instead of 3M3) so both the res and cap were replaced (One benefit of being electronics engineer!). bought a new hour-wheel, serviced it now its working good, so the hunt for bezel is on....

This afternoon, I'm going to tackle an ESA 9164 in an Omega, See what sort of mess I can make of that!

 

 

  • Like 1
Link to comment
Share on other sites

Welcome back to a fantastic hobby. Like yourself I returned about a year ago after at leased 25 years away and I'm afraid being over 50 means your sight goes but some good loupes a pair of 3.50 reading glasses and good light work for me.

Link to comment
Share on other sites

Welcome Alastair belatedly, from me in Newcastle upon Tyne,

It is good to have young blood joining the forum and I am sure you have found a good home for your hobby amongst like minded folk.

Cheers,

Vic

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...