Jump to content

Hello from a newbie

paul1977

By paul1977
in Introduce Yourself Here

 Share

Recommended Posts

paul1977 New Member

paul1977

Posted
Posted

Hello All.

I am interested in watch repair as a hobby. I have been looking at books and repair kits.

It would be great if professionals in this forum can direct in the right direction on the following list of things

  1.  Books
  2. Watch repair kits (looking at www.esslinger.com) --> any thought on the quality of this site.
  3. Witch should I start with for my first watch

Any help would be greatly appreciated.

Link to comment
Share on other sites
Ced Member

Ced

Posted
Posted

Hello Paul,

I was pretty much in the same situation when I started this hobby two years ago, so I am certainly no professional. 

This site helped me a lot: http://www.clockmaker.com.au/diy_seiko_7s26/ This is the best free source of structured information I could find so far, together with Esslinger and Mark's video of course... can't wait for his lessons to start later this month by the way !

I spent some time in Seiko modding, there are tons of sites about it. Thanks to these, I now feel confident enough to invest in more expensive parts in order to assemble my first ETA based watch later this summer. 

About books, I found most of them too advanced. There is one that provides a great deal of background information about watch assembly: https://www.amazon.com/Beginner-Watchmaking-Build-First-Watch/dp/1456451650 

True watchmakers will find this book ridiculously easy and sub-quality, but hey, we all need to start somewhere !    

Last but not least, I started with inexpensive Chinese and Indian made tools. Over time I got them replaced by German and Swiss made, as I realized how important the tools quality is in terms of reliability, accuracy, comfort...and therefore learning curve !

Cheers,

Cédric.

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello from me. You will find plenty on here.

If you are starting out on watch repairing and have little or no experience, get yourself some old pocket watch movements and practice on taking them apart and putting together. Do not buy the fusee type get the spring driven type they are very similar to a wrist watch but much bigger. Also get to know what the parts are called. Buy a good set of watch screwdrivers, a good pair of tweezers and different eyeglasses you will need a few, you might need to practice first in holding an eyeglass.

  • Like 2
Link to comment
Share on other sites
vinn3 Distinguished Member

vinn3

Posted
Posted

Paul,  welcome to the forum.   first you need magnification to look at very small parts,   ( i suggest a "head band magnifier" with replacable lenses) and some practice using tweesers to  pick up and move very small parts.  vinn

  • Like 1
Link to comment
Share on other sites
paul1977 New Member

paul1977

Posted
  • Author
Posted

thank you everyone for your advice and tips

Cedric: I prefer to get good quality tools right away. that way I will save money in the long run.

do you know a site where can I get swiss or german made tools, the site must be able to ship to Canada?

thanks

 

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome Paul! Good tools are a plus and I agree with you to get the good ones straight away. Good books will help too, but you need to be ready for them as your watchmaking skills advance. Some pdf of De Carle are free on the net so that would be a good starting point.

Check Ofrei or the TimeZone Watch School for a list of tools needed...I've also found that quality (of the same name brand), choice and price are much better with ofrei than all the rest...although, cousinsUK sometimes are unbeatable even overseas. Also, don't forget to visit our tools section.

Cheers,

Bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • oldhippy
      Movement inserted from crytal side

      By oldhippy · Posted

      Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
    • Jon
      Introducing myself

      By Jon · Posted

      Hi there  
    • Jon
      Movement inserted from crytal side

      By Jon · Posted

      Put the movement in a movement holder and it will be supported as you push down on the setting lever post to release the winding stem. Make sure the post is over the shoulder of the movement holder so what you are pressing down on is supported. As a general rule, hold the movement and not the movement holder. Replace the hands when the movement isn't in the case and support the centre jewel (if it has one) on a hard surface or staking block when replacing the hands to stop the jewel accidentally moving or even coming out. A dedicated movement holder with a central jewel support is even better, but pricey
    • JohnR725
      Main spring

      By JohnR725 · Posted

      It might help us if we knew which watch like model number.
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
×
×
  • Create New...