Jump to content

Recommended Posts

Here's some information on the output of the Cousins LED light as measured by a lux app on my IPhone.

This light is fitted with two rows of LEDs that can be both individually selected and dimmed. The readings were taken with my phone 10" below the light as this is the height I have it when working on watches. I also measured the light colour temperature at the different settings.

One row low setting 1,240 Lux ......... 6600K colour.

Two rows low setting 3,960 Lux ......... 6000K colour.

One row high setting 5,450 Lux ......... 6300k colour

Two rows high setting 20,800 Lux ....... 5600K colour

To give an idea of how it compares with the Cousins small portable fluorescent desktop lamp that I have currently been using.

At the same distance of 10" it gave 3,170 Lux .......5600K colour

At a distance of 5" it gave 30,600 Lux ....... 5600K colour although there was a bright hot spot with rapid fall off at the side. This was the the distance I have been using, and it was a nuisance as it often got in my way.

This has been the best improvement I have made regarding equipment this year. Please remember that these tests are for guidance only as I have not used specialised equipment. I hope you find the information useful.

post-124-0-04677400-1424984076_thumb.jpg

Here's some information on recommended lighting.

post-124-0-02862700-1424984329_thumb.jpg

  • Like 3
Link to comment
Share on other sites

Well cousins conveniently removed the branding from the box. (Just a thought: Did someone find it cheaper online and call them out?)

2a9534bc6893bb1f9900de1123d141ae.jpg

But here is a pic of the tag on the lamp itself.

2608a5a03cce4d7ac9b9639d4351dd8b.jpg

Hope this helps

Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites

Thanks, Mark. Based on the model number,  I found them for sale in Russia and Poland. Strangely not in China. Prices (ex-delivery) approx. £56.2 in Russia and £53.8 in Poland. If anybody interested, I can try to find cost of postage.

Isn't Internet wonderful thing?

Link to comment
Share on other sites

Following Rob's link to the model I note that the manufacturer offers samples - see on right under model name. If any of you has a legit company then this might be a way to collar a few lights at a competitive price. You could sign a few of us up maybe? :-)

Link to comment
Share on other sites

It is a broad strip-light giving fore and aft shadows. I see them in your photo George, admittedly fairly faint. Is it not better to have a circular light source? Mine is a neon tube but surely it must exist now with LEDs? But if not, then this one is the nbt..

Link to comment
Share on other sites

Hi Colin, without having a circular light to compare it with I can't really make comment. All I can say that working on movements has been a lot easier since I installed it. I'm sure others will pitch in when they start using them.

Link to comment
Share on other sites

Would you not have to look through the centre of the light as a camera would with a ring flash fitted, to get the result you are after?

I really don't think you would be disappointed with the linear light fitting Colin.

Link to comment
Share on other sites

Would you not have to look through the centre of the light as a camera would with a ring flash fitted, to get the result you are after?

I really don't think you would be disappointed with the linear light fitting Colin.

This light is 50 cm diameter and would be placed slightly above head height so as to be able to work underneath. Then there is the problem of shadows from the hands, but on account of the distributed light source these would be less obtrusive than from any other more localised source.

 

Yes, George, I am sure that the Cousins light is the best at present on the market for fitting to the bench and I shall buy one for my lathe workshop bench that now has a miserable expensive LED spotlight sold for professional machine use, but very heavy on shadows.

 

Maybe I shall give the circular one a go for my watch tinkering table, although for this, during the daytime, I have hard-to-beat overhead daylight from a roof Velux - except after snow, and we have had plenty this Winter!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...