Jump to content

Homemade Watch Parts 2016


Recommended Posts

Very limited in time at the moment but want to try and do semi-homemade watches for me and the wife before the autumn ends. First day this year in the garage. Starting with the wife's as this "should" be the easier as it must be a quartz. Total hobbyist at this, and although I have a rough idea of what I am trying to achieve, making a lot of it up as I go along. Hope to share progress on this forum for anyone who is interested 

Dial 0.2mm brass sheet

IMG_3174h.jpg

 

Cut out and superglued onto a brass 3mm disc (machined from 10SWG sheet)

IMG_3175mj.jpg

Drill centre hole 1.1mm (was going to be 1.0mm but I snapped the drill bit)

IMG_3182jj.jpg

Swap onto the smaller lathe

IMG_3186mm.jpg

 

Mark out the dial diameter

IMG_3185mm.jpg

 

Aldi today selling routers for £24.99. Perfect to fix an old Gravograph I bought ages ago on ebay with dead motorIMG_3198nnn.jpg

 

Test piece which will go on the watch box as a plaque. Can now do engraving on the case back of the gents watch (later project still in the head)

IMG_3203jj.jpg

This is movement for my wife's watch. Ronda 1042. Smallest I could find which suites what I think I will need. Beside is a 5pence piece to give scale. Had to be a quartz as winding and setting the time was an absolute no no for the user

 

IMG_3204ll.jpg

Showing with dial in position. Decided I will try to attach with dial stickers rather then solder on feet (more chance of disaster and no time to keep scrapping)

mmm.jpg

Trying bath repair enamel. Will leave this for a week to set. Hopefully not too high and works ok

m  ggg.jpg

Square lump of silver. Starting the casing

 

IMG_3199bb.jpg

10mm hole to start things off

 

IMG_3202nn.jpg

 

 

 

 

 

 

 

  • Like 6
Link to comment
Share on other sites

  • 2 weeks later...

I've always wanted to build a watch from 'scratch', or at least start with basic movement and embellish accordingly. I met a watchmaker, (sort of, on line) who started with ETA 6497/8 and had a variety of dials and hand combinations you could "customize" your own watch. Below pics from his website. I'm not promoting his efforts, just showing what can be done.

Good job on your efforts! Can't wait to see more.

Some of the many parts available for your custom design.

All cases have display backs. These are the plain movements.

Lineup of hand options.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

More progress today, getting close to finish line ......

Make the case back ... fit rubber o-ringIMG_3352small.jpg

 

 

 

IMG_3355small.jpg

 

IMG_3383small.jpg

 

 

 

IMG_3387small.jpg

 

IMG_3390small.jpg

 

This is not finished, but getting close, so just laid things together to see roughly what end result will look like

 

IMG_3428small.jpg

Cubic zircona finish

IMG_3437small.jpg

  • Like 5
Link to comment
Share on other sites

very good lathe  work !   as far as snapping drill bits,  " vary feed and speed"  to produce a "proper chip".  drill bit sharpening and dubbing is another  vast subject.   keep up the good work.  vinn

Link to comment
Share on other sites

post 5 A.jpg

 

Thank you for positive comments. Glass is on, all the zircona was glued onto silver setting strips with Araldite Crystal Clear. There is plenty of things not right which I would do differently, but I suppose that is the problem when no prototype to try things out first. Anyway, I learnt a lot doing this project, and I know some of the areas that need to be improved

 

  • Like 3
Link to comment
Share on other sites

  • 3 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...