Jump to content

Could this mean the end of ultrasonic cleaners as we know them?


ro63rto

Recommended Posts

Truely interesting! I'd love to throw one in the bottom of my cleaning machine and make it ultrasonic!

That said, watch cleaning machines normally cycle through different frequencies, because that goes from large part cleaning to small part cleaning, so you'd need one specialized. But, totally doable!

 

 

Link to comment
Share on other sites

  • 1 year later...
On ‎05‎/‎02‎/‎2018 at 1:54 PM, jtorress said:

I use an old electric toothbrush without the brush. I dip the tip in a stainless steel container with degreaser and the vibration does the rest. The idea is similar to this.

Which sort of tooth brush?? Normal or Sonic??

 

Link to comment
Share on other sites

  • 2 weeks later...
On 2/5/2018 at 8:54 AM, jtorress said:

I use an old electric toothbrush without the brush. I dip the tip in a stainless steel container with degreaser and the vibration does the rest. The idea is similar to this.

That's cool. I suppose you're using water based degreasers, I think solvents would melt the plastic toothbrush. No? 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • They are for balance wheels only and wheels with similar pivots (B = bombé). You can use flat jewels for balance wheels (not recommended)  but no bombé jewels for ordinary wheels.
    • Not SS but very slight wear on the underside edges have a little brass showing under magnification. New crystal arrived £3 with tax. Nice champaign dial color.
    • I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf While parts are drying I'm on the hunt for a replacement crystal. I can measure the opening and get a generic one, but it'd be nice to find out what the original looked like first. Of course, case code 3093 does not appear in any of my reference materials. JulesBorel lists a C3093 case code, and shows Bulova part # 1222-5. Does anyone have information on this guy? I found a thread here talking about how the -5 is the height of the crystal, but that's as far as I've gotten. I also found one site that claims to have it in stock, but before I risk my $20 I'd like to confirm it's the right part.  
    • Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
×
×
  • Create New...