Jump to content

Fixed 2 Pocket Watches


Recommended Posts

Fixed an old German pocket watch and an old 18l Elgin. The German one needed a new mainspring so I picked one up at Cousins UK and after much fun finally got the arbour to grab the spring and installed it. Then I oiled the crap out of it through the side of the movement with D5 and tada in started running. The Elgin I needed to disassemble to get at the jewels and gears because it was completely ceased up. Oils and reassembled it and it runs really well. I intend to do a complete cleaning on both of these watches but, for now, just wanted to see if I could get them running.

18f5f32634a445d9de1316bcabc27d11.jpg4a446b0434d76a9b09902a5f0220e2fb.jpgf36f919353e2430e8bcc45f2247c9745.jpghttps://vimeo.com/166703980

Sent from my iPhone using Tapatalk

  • Like 3
Link to comment
Share on other sites

On May 15, 2016 at 9:34 AM, jdrichard said:

Fixed an old German pocket watch and an old 18l Elgin. The German one needed a new mainspring so I picked one up at Cousins UK and after much fun finally got the arbour to grab the spring and installed it. Then I oiled the crap out of it through the side of the movement with D5 and tada in started running. The Elgin I needed to disassemble to get at the jewels and gears because it was completely ceased up. Oils and reassembled it and it runs really well. I intend to do a complete cleaning on both of these watches but, for now, just wanted to see if I could get them running.

18f5f32634a445d9de1316bcabc27d11.jpg4a446b0434d76a9b09902a5f0220e2fb.jpgf36f919353e2430e8bcc45f2247c9745.jpghttps://vimeo.com/166703980

Sent from my iPhone using Tapatalk

I'll bet it was fun getting all the wheel train pivots lined up on that thing!

Dave

  • Like 2
Link to comment
Share on other sites

I'll bet it was fun getting all the wheel train pivots lined up on that thing!

Dave

A living hell:) the trick was to poke things very carefully From the side without any real pressure. Plus 200% patience and 500% luck.

Link to comment
Share on other sites

  • 1 month later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...