Jump to content
  • Similar Content

    • By Padd
      Hello Everyone,
      Padd here from the UK.
      It all started with a desire to fix a Submariner replica I bought off a lucky lucky man in Pisa, Italy while on a European tour.
      Next thing I know I'm investigating Submariner replicas and building my own, signed by me, using a Seagull ST2130 movement, adventure watch.
      Now I'm hooked, I took inspiration from Marks videos, now I'm happily starting to work on parts of the movement, and have recovered one or two movements where the stem came out, but wouldn't stay back in. I have built a few watches for friends and relations, but now I need to be able to service them when they come back to me.
      I also have a couple of movements that run really badly, so I will be practising on those over the winter weekends. Full repair/servicing kit IS my Christmas present.
      I really want to get one of those ST2130's, serviced and tweaked by me, doing a -------------------------- on my timegrapher. not a -.'-.'''--,'.'.' (and worse) that they do at the moment.
      I wont start to list my watch collection, but it runs from a Casio digital to a Rolex pocket watch with Seikos, Citizens, Omegas and home builds in the mix.
      Must do Mark's course, but I'm afraid I may have already learned 60+% of it already.

    • By PJA
      Just in case, I came across this "Watch-O-Scope" software. To those who have a need for it. Also here is an instructional video how to install. I hope it will help somebody here.
    • By maclerche
      I have gotten hold on a Elma Star vibrograf. Does anyone know if you can still buy paper and carbon for this machine?  
       

    • By SteveT
      I was wondering how do the timegrapher phone app's out there compare to a dedicated bench top machine. I'm guessing it's all down to the piezoelectric pickup? I installed tickoprint on my phone the other day. But to get the full features you need to shell out $30, if you then also have to shell out for a piezoelectric mic, then you are almost at the same price point as a cheap chinese bench top machine!
       
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I finally got around to getting the NH36 movement and changed out the day wheel. When I put on the dial and was turning the crown to establish the 12 o'clock position to install the hands, I noticed that no matter how much I turned the crown, it would not change over. Did I screw up something? I was turning clockwise like my other 7S26 Seiko. 
    • Thanks everyone, food for thought and I’ve learned some by reading your posts. More research needed! Sent from my iPhone using Tapatalk
    • The Spiedel wasn't really doing it for me, so I popped it on a plain leather band, somewhere between rosewood and burgundy.  Much more appropriate I think, and a sight more comfortable I might add. I was almost tempted to post it in "Watch of Today" again, since I'm still wearing it. Not a single issue so far, and hovering somewhere less than +20s/day aver the last couple of days. 
    • I figured it out. I totally overlooked that this particular 974 has the little blue locking screw to lock it in the winding position when out of the case which explains why the hands wouldn't move. I didn't have it locked which kept it in the setting position when out of the case and thus not having enough power to turn the hands....I'm an idiot
    • I think this is possible if there is very low friction to the cannon pinion. The balance and the trainwheels run but the cannon pinion and all following wheels and the hands do not as one of these parts is stuck somehow.    I would try and analyze step by step. Take of dial, hands, hour wheel and intermediate wheel, put the minute hand on the cannon pinion and observe. If the minute hand does not stop at 12.05 take the next step and add the intermediate wheel and observe. After that add the hour wheel and so on until you find the step where the error occurs.  
×
×
  • Create New...