Jump to content
  • Similar Content

    • By deathkei
      Hello
      I measured my Omega Caliber 1120 through an timegrapher app. (Dial Up, full wind)
      I know the app is not very accurate.

      I checked about +100s/d difference and sharply tilted graph .
      The odd thing is that the bottom part of the graph is not printed every 100+- seconds.(red-colored circle)
      Is this a feature of the timegrapher, or does it indicate abnormal state of movement component?
       
      Thank you for the comments.
    • By FitOutPost
      Hi, my name is Ross. I am a rookie watch enthusiast and I am really puzzled here.
      Could someone explain to me what kind of a problem am I facing with my timegrapher?
      I do two sets of measurements with the same watch (1 day or 6 days apart) and receive vastly different results - to the point of being completely different from what I observe in real life. 
      For example, my timegrapher shows that my watch is running fast (or ahead of time), while in real life I observe that it runs 7 seconds per day behind. I even recorded a video about it so you could see it for yourself: https://youtu.be/mhGzf6aLMlY
      How should I interpret that? Am I doing anything wrong?

      Problem_with_Timegrapher_-_Knowledge_Sharing__16.mp4
    • By east3rn
      Hello. 
      I am working on a vtg. Citizen cal.7520 automatic movement.
      I have put the watch on the timegrapher 
      The graph looks OK but the beat error shows 9.9ms. I presumed that beat error should be around 1.0~2.0 given the shape of the graph.
      Is the beat error actually bad or the timegrapher is wrong??
      Thank you!
       

    • By Padd
      Hello Everyone,
      Padd here from the UK.
      It all started with a desire to fix a Submariner replica I bought off a lucky lucky man in Pisa, Italy while on a European tour.
      Next thing I know I'm investigating Submariner replicas and building my own, signed by me, using a Seagull ST2130 movement, adventure watch.
      Now I'm hooked, I took inspiration from Marks videos, now I'm happily starting to work on parts of the movement, and have recovered one or two movements where the stem came out, but wouldn't stay back in. I have built a few watches for friends and relations, but now I need to be able to service them when they come back to me.
      I also have a couple of movements that run really badly, so I will be practising on those over the winter weekends. Full repair/servicing kit IS my Christmas present.
      I really want to get one of those ST2130's, serviced and tweaked by me, doing a -------------------------- on my timegrapher. not a -.'-.'''--,'.'.' (and worse) that they do at the moment.
      I wont start to list my watch collection, but it runs from a Casio digital to a Rolex pocket watch with Seikos, Citizens, Omegas and home builds in the mix.
      Must do Mark's course, but I'm afraid I may have already learned 60+% of it already.

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I've not tried shipping from outside the UK recently, other than from China. UK to UK shipping is currently pretty normal. i.e. slow as ever, but not much slower. China shipping is variable. I rarely ship to/from the USA as it has always been a bit of a rip off. $30 for a $10 item.. that sort of nonsense.
    • Many are just friction fitted. They are factory pushed on. 
    • Oh my word that’s so kind... I’ll be happy to reimburse you if you find anything
    • This is the pallet staff in place with both plates screwed down. A puff off my blower and as you can see it spins freely, as does the rest of the train. So I’m thinking the low amplitude is again the hairspring. It seems to be catching on itself as there looks to be a definite click to it when it’s in motion, it’s not massive but it’s visible.  Theories and thoughts appreciated, cheers  IMG_7091.MOV
    • Called an assortment or a mess, I,ll dig in my bag of 2000 staffs, I just may find some to suit your balance wheel. If not an exact match, you can get by with broaching for J and G while  K isn't as significant. Making a staff is a last resort and expensive and whoever makes one should fit it onto the wheel and poise it as well. I,ll start digging, be happy to gift wrap and send you some, fingers  crossed.    
×
×
  • Create New...