Jump to content
  • Similar Content

    • By Padd
      Hello Everyone,
      Padd here from the UK.
      It all started with a desire to fix a Submariner replica I bought off a lucky lucky man in Pisa, Italy while on a European tour.
      Next thing I know I'm investigating Submariner replicas and building my own, signed by me, using a Seagull ST2130 movement, adventure watch.
      Now I'm hooked, I took inspiration from Marks videos, now I'm happily starting to work on parts of the movement, and have recovered one or two movements where the stem came out, but wouldn't stay back in. I have built a few watches for friends and relations, but now I need to be able to service them when they come back to me.
      I also have a couple of movements that run really badly, so I will be practising on those over the winter weekends. Full repair/servicing kit IS my Christmas present.
      I really want to get one of those ST2130's, serviced and tweaked by me, doing a -------------------------- on my timegrapher. not a -.'-.'''--,'.'.' (and worse) that they do at the moment.
      I wont start to list my watch collection, but it runs from a Casio digital to a Rolex pocket watch with Seikos, Citizens, Omegas and home builds in the mix.
      Must do Mark's course, but I'm afraid I may have already learned 60+% of it already.

    • By PJA
      Just in case, I came across this "Watch-O-Scope" software. To those who have a need for it. Also here is an instructional video how to install. I hope it will help somebody here.
    • By maclerche
      I have gotten hold on a Elma Star vibrograf. Does anyone know if you can still buy paper and carbon for this machine?  
       

    • By SteveT
      I was wondering how do the timegrapher phone app's out there compare to a dedicated bench top machine. I'm guessing it's all down to the piezoelectric pickup? I installed tickoprint on my phone the other day. But to get the full features you need to shell out $30, if you then also have to shell out for a piezoelectric mic, then you are almost at the same price point as a cheap chinese bench top machine!
       
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Yes I considered that, i would pick up one which has no shelves or drawers at the bottom, most of them have them.
    • Make sure you have plenty of leg room. You could be sat there for hours so you do not want to be cramped up. 
    • good show,  you did good by not removing the balance till the main spring was let down.  "no pallets in this design!"   a watch "with pallets"  it is proper to remove the ballance before spring let down.   keep up the good work.   vin
    • Hi fellow Clockmakers, Would a bureau desk work as a clock/watchmaker desk? Not high enough (could be solved) or stable enough? I could fetch one of these from facebook around 30-40 pounds. I like the idea because it would be more or less child and dustproof as you can close and lock the whole thing. Best regards, lui
    • I have a monoprice voxel. It is limited in features compared to others but works out-of-the-box and was a good price. I wouldn't bother with a 3d printer for parts holders and the like. There are a few nice designs on thingiverse but really it isn't worth the bother. Injection molded supplies are going to be better quality and you can buy a bunch all at once instead of one waiting to print them out one at a time. Where it may come in handy is when you need something in a specific shape that you cannot buy. But keep in mind you will need to learn at least some basic CAD design. I use Moi3d which is excellent but there are cheaper alternatives. I've used my 3d printer to create different adapters and holders where I needed an exact shape. For example, I was bending a strip of brass and was able to create plastic bending clamps I compressed with some pliers. I was able to figure out the exact inside and outside curve I needed and print to match. The nice thing about the 3d printed parts is you can use glue to attach whatever you need to it without worrying about having to damage the print when removing it as you can always print a new one.
×
×
  • Create New...