Jump to content
  • Similar Content

    • By Padd
      Hello Everyone,
      Padd here from the UK.
      It all started with a desire to fix a Submariner replica I bought off a lucky lucky man in Pisa, Italy while on a European tour.
      Next thing I know I'm investigating Submariner replicas and building my own, signed by me, using a Seagull ST2130 movement, adventure watch.
      Now I'm hooked, I took inspiration from Marks videos, now I'm happily starting to work on parts of the movement, and have recovered one or two movements where the stem came out, but wouldn't stay back in. I have built a few watches for friends and relations, but now I need to be able to service them when they come back to me.
      I also have a couple of movements that run really badly, so I will be practising on those over the winter weekends. Full repair/servicing kit IS my Christmas present.
      I really want to get one of those ST2130's, serviced and tweaked by me, doing a -------------------------- on my timegrapher. not a -.'-.'''--,'.'.' (and worse) that they do at the moment.
      I wont start to list my watch collection, but it runs from a Casio digital to a Rolex pocket watch with Seikos, Citizens, Omegas and home builds in the mix.
      Must do Mark's course, but I'm afraid I may have already learned 60+% of it already.

    • By PJA
      Just in case, I came across this "Watch-O-Scope" software. To those who have a need for it. Also here is an instructional video how to install. I hope it will help somebody here.
    • By maclerche
      I have gotten hold on a Elma Star vibrograf. Does anyone know if you can still buy paper and carbon for this machine?  
       

    • By SteveT
      I was wondering how do the timegrapher phone app's out there compare to a dedicated bench top machine. I'm guessing it's all down to the piezoelectric pickup? I installed tickoprint on my phone the other day. But to get the full features you need to shell out $30, if you then also have to shell out for a piezoelectric mic, then you are almost at the same price point as a cheap chinese bench top machine!
       
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Hi   All advise given is wise and should be noted, also consider lightening the inside of any desk/work place so as to give good reflection of light. My workbench is covered in white lino tile, a pale green as per the bergeon mats etc.  as Marc says the roll top is probably the best option.
    • Brilliant HSL nice of you to share the data  Thanks.
    • Thanks for the encouragement. I think it has to be a right-hand thread on the arbor, due to the direction the spring is acting. The mainspring did indeed have quite a bit of power left in it. There was a buzzing and a whirring for quite a while after I pulled out the balance, so it seems I have been very lucky indeed! I will check everything carefully again for damage. I have already found one cracked jewel.
    • That is (almost) identical to the part I have. Could not have wished for better support, thank you! I do not have the two holes in the barrel arbour, so I can't use a compass or similar to unscrew it. I will try gripping the circumference with something. The action of the spring suggests it is a conventional right-hand thread, correct? Part of the stop-function (the disc with the finger on it) was missing when I opened the case, so it may well have been broken by another bodger who got there before me. I have the Maltese cross part. I may have a go at making a replacement if it's not too difficult. Would you have a picture of the part I need? How is it held in place?
    • HSL- I am new to this and know the above will help me in the future. Thank you for sharing.  I believe and apply pay-it-forward :ThumbsUp:
×
×
  • Create New...