Jump to content

Chinese Timegraphers

Legarm
 Share

Recommended Posts

  • Replies 386
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Kalanag
Kalanag

The Chinese microphones to be used with a timegrapher software or app get better and cheaper! Here is what I got today. I used the free tg timegrapher software (tg-timer 0.5.0)

clockboy
clockboy

When you finally purchase you watch timing machine you might find the following vid interesting. How to determine what the watch you are working on lift angle is using a timing machine.  

JohnR725
JohnR725

There are differences beyond the display size of why someone would pay roughly $3000 versus 225 for a 1900. But for most hobbyists you're never going to notice the difference. I have actually done sid

Posted Images

JohnR725 Distinguished Member

JohnR725

Posted
Posted

The  Chinese have a interesting sense a humor for marketing Various spellings of Witschi Which can be found at the site below. Very very nice timing machines unfortunately rather expensive.

 

http://www.witschi.com/en/home.html

 

Another option for timing machine because it's in a very similar price range is the 1900. Both the 1000 1900 Are functionally very similar except 1900 has some added features and  a much nicer display with smaller pixels. Then because it's color display there are some other modes because they can change the color display. One of the more useful things is the display mode where you see 96 seconds and still another mode which will display 192 seconds.

post-673-0-67547900-1426133236_thumb.jpg

post-673-0-42528900-1426133237_thumb.jpg

post-673-0-89428800-1426133237_thumb.jpg

Link to comment
Share on other sites
  • 2 months later...
steveorval Watch Enthusiast

steveorval

Posted
Posted

hi guys, i have just leapt into the 21st century and invested? in a timegrapher 1900 haven't got it out the box yet but read the instructions which took all of 5 minutes what a let down i was expecting at least some screen shots of faults or what to look for so what i need is some advice or is there some docs somewhere to download, thanks lads

Link to comment
Share on other sites
  • 2 weeks later...
steveorval Watch Enthusiast

steveorval

Posted
Posted

hi guys, having used my timegrapher for the last two weeks and wondering before if it was worth getting i now wonder how i managed with out one, but now i have a little question, i have a movement on it that that does what it should for about a couple of seconds then goes to the home screen and then back again to the evaluating screen and so on, the movement is working fine thro this and the machine is fine with another movement, just wondered if anyone else has had this prob, thanks, steve

Link to comment
Share on other sites
  • 2 months later...
Vich Distinguished Member

Vich

Posted
Posted

Hello Folks,

 

Good news - I took delivery of a "2015 New Coaxial LCD MTG Watch Tester Timing Multifunction Timegrapher NO.1900" yesterday - Birthday present from my gorgeous wife. :woohoo-jumping-smiley-emoticon:

 

Bad News - I did have to pay duty (£20.00) to DHL prior to delivery :thumbsd:

 

Worse News - It was immediately confiscated by said wife and I am not allowed to even look at it until my birthday  :startle: 

 

Oh well just have to survive until then :beerhat:

 

Cheers,

 

Vic

  • Haha 1
Link to comment
Share on other sites
DJT2 WRT Addict

DJT2

Posted
Posted

Hello Folks,

Good news - I took delivery of a "2015 New Coaxial LCD MTG Watch Tester Timing Multifunction Timegrapher NO.1900" yesterday - Birthday present from my gorgeous wife. :woohoo-jumping-smiley-emoticon:

Bad News - I did have to pay duty (£20.00) to DHL prior to delivery :thumbsd:

Worse News - It was immediately confiscated by said wife and I am not allowed to even look at it until my birthday :startle:

Oh well just have to survive until then :beerhat:

Cheers,

Vic

Lucky guy Vic. I wish my wife gave me presents like that[emoji1]

Sent from my GT-I9505 using Tapatalk

Link to comment
Share on other sites
Marc Distinguished Member

Marc

Posted
Posted

I have been using a 1900 since March last year (curiously enough also a birthday present from my lovely wifey) and have to say that it is quite a good machine for the money. I think you would have to spend a heck of a lot more to get any kind of a meaningful upgrade on it.

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Marc,

 

Thats good to hear. 

 

I did the research that I could looking at the opinions and have to say that you have come up with the same opinion as me.  At first I was looking at the 1000 but for the difference in price it seemed worth it.  It seems to be a good balance between cost and efficacy.  And of course there were some resounding recommendations from other forum members like old George ;) .

 

Cheers,

 

Vic

  • Like 1
Link to comment
Share on other sites
  • 8 months later...
Bill3 Watch Enthusiast

Bill3

Posted
Posted

I am thinking about buying a timegrapher.  I have seen some on Alibaba for about $150 including shipping costs.  Has anyone here tried one of these?  They are made by Wei Shi and are offered in 120  or 110 watt models.  The model I have looked at is the #1000.  Comments, praise, and criticism are welcomed.  Help me make a decision.  

 

Link to comment
Share on other sites
Hertzogpholian Member

Hertzogpholian

Posted
Posted (edited)

very useful, they work great and save lots of time/aggro.

I have the 1900.  differences to the 1000 are color screen so the tick and tock are different colors and the pixels are smaller than the 1000; graphing display can be changed to show longer time ranges and has a couple different curves; resolution is .1 instead of 1.0 for some measurements: lift angle and fast/slow and the 1900 does "signal conditioning" or some other unknown mumbo jumbo.

i don't know if any of those are worth the price premium (other than the color screen) but I got it for the same price as the 1000, so it was kind of a no-brainer for me.

btw, the sound it makes is not the actual sound of the watch - it's generated by the tester.  which is kinda lame, imo.

 

Edited by Hertzogpholian
  • Like 1
Link to comment
Share on other sites
maclerche WRT Addict

maclerche

Posted
Posted
On 19. april 2016 at 0:36 AM, Bill3 said:

I am thinking about buying a timegrapher.  I have seen some on Alibaba for about $150 including shipping costs.  Has anyone here tried one of these?  They are made by Wei Shi and are offered in 120  or 110 watt models.  The model I have looked at is the #1000.  Comments, praise, and criticism are welcomed.  Help me make a decision.  

 

http://watchguy.co.uk/improvements/

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
3 hours ago, maclerche said:

http://watchguy.co.uk/improvements/

For 15x the money of the Chinese one, you get a bigger display (that is harder to read), and it shows exactly the same beat rate, amplitude, etc. as the Chinese one. Down to the last s/d. But you can do Omega co-axial escapements on it, so there is some advantage. And I can call myself serious now 

Christian at his best. Always straight and down to earth. Try asking some other "watchmaker" about their $5,000 timing machine sporting  a lo-res display straight back from the 80s, they will tell you that it's unique, inimitable, and worth more than what it cost. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • arron
      Ball PW balance staff and hands

      By arron · Posted

      @JohnR725 that's very helpful.  I appreciate the time you took to give those instructions and post the pictures.  below is a picture of my staff, which looks identical to the ones you posted.  The approx measurements I got are: .772 on the left part of the staff; .715 on the right side of the hub; the hub is 1.107; and the overall length (minus the broken pivot) is 5.248; which seem to line up with the measurements you posted.  I didn't think to measure the pivot, which I'll do if there's enough of one left on the staff.  Thanks again.
    • DDean
      Incabloc Lyre Spring & Low Earth Orbit

      By DDean · Posted

      Thank you to both of you!  I've been somewhat derailed by this quandary for a couple of days now. I am guessing that the point of the wider tweezers is to support the whole spring at the same time in an effort to prevent it going under tension... I have already discovered the Zen of a clutter free space, and trying to keep my work well away from the edge, however the most terrifying of the flights wasn't so short, I had my work in the middle of the table and nothing else around.  That particular launch was towards me.  I distinctly recall feeling the spring hit my left hand as it escaped.  I only found it by dumb luck, on the floor, between the legs of my chair.  I need to order a pack of replacements just in case.  I think I recall a thread discussing where to find them, and the differences between the clones and the authentic ETA ones, pointing out that they're not interchangeable (the clones being longer IIRC).  Now I just have to find that thread again.  What I haven't mastered is the zen of the search function here.  I'm sure I"ll get that down eventually. So this is similar to, but different from one of the posts I had found in my original searches (or maybe I'm just hallucinating, I can't find the post I thought I remember).  The bits about the corner filled in a gap in what I'd read before.  At least I have a more clear picture in my head about what needs to happen now.  Yes, I've learned about how touchy these springs are.  What I'm not sure I have a good grasp on is the understanding of what causes the spring to flex, other than to say "the slightest little touch"  I think I'm going to try a small bit of Rodico to position the spring next time.
    • HectorLooi
      Casio AQ-321G Battery

      By HectorLooi · Posted

      I think it's stamped on the inside cover. 309 I think.
    • Waggy
      Casio AQ-321G Battery

      By Waggy · Posted

      Hi all, needing a little help. I have an old Casio AQ-321G, but have no idea what battery it takes. I've looked around online, but cannot see anything... I see a 309 stamped on the case back, could this be it....? Can you please help, below are some pictures:
    • nevenbekriev
      'Services' Chronograph

      By nevenbekriev · Posted

      The radial teeth are for hte seconds register, and the other (which is simple and doesn' take away significant torque from the train) for the minutes register.
×
×
  • Create New...