Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Padd
      Hello Everyone,
      Padd here from the UK.
      It all started with a desire to fix a Submariner replica I bought off a lucky lucky man in Pisa, Italy while on a European tour.
      Next thing I know I'm investigating Submariner replicas and building my own, signed by me, using a Seagull ST2130 movement, adventure watch.
      Now I'm hooked, I took inspiration from Marks videos, now I'm happily starting to work on parts of the movement, and have recovered one or two movements where the stem came out, but wouldn't stay back in. I have built a few watches for friends and relations, but now I need to be able to service them when they come back to me.
      I also have a couple of movements that run really badly, so I will be practising on those over the winter weekends. Full repair/servicing kit IS my Christmas present.
      I really want to get one of those ST2130's, serviced and tweaked by me, doing a -------------------------- on my timegrapher. not a -.'-.'''--,'.'.' (and worse) that they do at the moment.
      I wont start to list my watch collection, but it runs from a Casio digital to a Rolex pocket watch with Seikos, Citizens, Omegas and home builds in the mix.
      Must do Mark's course, but I'm afraid I may have already learned 60+% of it already.

    • By PJA
      Just in case, I came across this "Watch-O-Scope" software. To those who have a need for it. Also here is an instructional video how to install. I hope it will help somebody here.
    • By maclerche
      I have gotten hold on a Elma Star vibrograf. Does anyone know if you can still buy paper and carbon for this machine?  

    • By SteveT
      I was wondering how do the timegrapher phone app's out there compare to a dedicated bench top machine. I'm guessing it's all down to the piezoelectric pickup? I installed tickoprint on my phone the other day. But to get the full features you need to shell out $30, if you then also have to shell out for a piezoelectric mic, then you are almost at the same price point as a cheap chinese bench top machine!
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I don't doubt that it didn't made a problem but the attached service sheet indicates 9010 for the third wheel. As a general rule HP (High Pressure, is not even really an oil) is used to parts that are driven from turning the crown, or directly by the barrel. All the rest get fine oil. _C_T_CT_2824-2_FDE_481688_24.pdf
    • Do the day change? With the dial removed check that the day / date  driving wheel turns, that date ring is free and its finger spring is engaged. You will need to remove the calendar plate to correct any problem in this area. At the same time check quick-set. Attached service sheet.   7S26C_36C.pdf
    • NH36 are good mov'ts and should be accurate to the specifications or better. You can post pictures on the timegrapher (or equivalent application) take in 2 or 3 positions.
    • I recently got a nice set of dust covers Envoyé de mon moto g(7) power en utilisant Tapatalk
    • Have you checked mainplates side at 5hr and at 2hr for little screws holding the dial feet? If they don,t unscrew peacefully, put penetrating oil on them, let soak over night, sharpen you screwdriver to perfect fit. If you can,t find the screws, give claiber post pix of MP sides( outer circumference) Good luck
  • Create New...