Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By east3rn
      Hello. 
      I am working on a vtg. Citizen cal.7520 automatic movement.
      I have put the watch on the timegrapher 
      The graph looks OK but the beat error shows 9.9ms. I presumed that beat error should be around 1.0~2.0 given the shape of the graph.
      Is the beat error actually bad or the timegrapher is wrong??
      Thank you!
       

    • By Padd
      Hello Everyone,
      Padd here from the UK.
      It all started with a desire to fix a Submariner replica I bought off a lucky lucky man in Pisa, Italy while on a European tour.
      Next thing I know I'm investigating Submariner replicas and building my own, signed by me, using a Seagull ST2130 movement, adventure watch.
      Now I'm hooked, I took inspiration from Marks videos, now I'm happily starting to work on parts of the movement, and have recovered one or two movements where the stem came out, but wouldn't stay back in. I have built a few watches for friends and relations, but now I need to be able to service them when they come back to me.
      I also have a couple of movements that run really badly, so I will be practising on those over the winter weekends. Full repair/servicing kit IS my Christmas present.
      I really want to get one of those ST2130's, serviced and tweaked by me, doing a -------------------------- on my timegrapher. not a -.'-.'''--,'.'.' (and worse) that they do at the moment.
      I wont start to list my watch collection, but it runs from a Casio digital to a Rolex pocket watch with Seikos, Citizens, Omegas and home builds in the mix.
      Must do Mark's course, but I'm afraid I may have already learned 60+% of it already.

    • By PJA
      Just in case, I came across this "Watch-O-Scope" software. To those who have a need for it. Also here is an instructional video how to install. I hope it will help somebody here.
    • By maclerche
      I have gotten hold on a Elma Star vibrograf. Does anyone know if you can still buy paper and carbon for this machine?  
       

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I presume by that, you mean that they would survive a nuclear apocalypse, rather than that they are tasty when fried in a wok.
    • Hi *, Originally I did not introduce myself thinking noone is really interested who I am but after a few months and after receiving so many friendly advice and comments I felt i must do it. The story is started with this one: WWW Eterna I knew absolutely nothing about clocks and watches apart from the fact that they do show the time and you can overwound them.  Now i am on level 3 with the course and I have already serviced a few watches and clocks. I seem to like clocks more than watches but time will decide. I want to live a 1000 years to see all type of clocks and watches and to try all the food we have on this globe.  Id like to learn more about clocks and watches and I would love to have the experience with them but I have a very limited time I can spend with them, anyway I am going to be the new Tompion. If you find a WWW watch in the dirt let me know I am interested in buying it. I am Hungarian but living in UK, Cambridgeshire so I am not just breaking the pivots, but English too time to time. Good luck and my best regards, lui    
    • The cockroach  of watches.
    • Hello Clockmakers, unfortunately I could not spend much time with clocks recently (what a relief for them) but now I have to read about carriage clocks. I paid £48 pounds for this one without knowing anything about carriage clocks, sounds realistic but i dont know. I have already manually cleaned the case a bit, but did not touch the movement yet. What I noticed is that every brass piece has a number stamped in it: 756 What does that mean? Serial number? Or the type? Ohh and more thing. Should it be really shiny and polished? Generally speaking? Or shall we leave the patina on? Best regards, lui  VID_20191016_002219.mp4
    • Thank you. This repair forum is fantastic on many  levels the people on here are honest and reliable and makes the whole experience pleasurable.
×
×
  • Create New...