Jump to content

Want to say hallo

maclerche

By maclerche
in Introduce Yourself Here

 Share

Recommended Posts

maclerche WRT Addict

maclerche

Posted
Posted

Hi
This is my first post in this forum.
This forum is for me "godsend". I have had an interest in watches since early 2013 when I bought an Omega 30T2 from 1945. As the watchmaker where I bought the wristwatch shown me the movement I was quite impressed. The technique, wow that you can produce these small mechanical wonders …
After some time, my interest was now in the Vulcain Cricket, this movement and its histore did that it was the fire that really caught my interest. In the beginning of 2013 I took a week on the Danish watchmaker school to try the watchmaking profession. After these 5 days I was determined that I, despite the age of 50 soon would train as a watchmaker. Unfortunately I could not fine a solution to getting in learning when I founded the home just before the financial crisis and therefore will not withstand the low pay as a learning relationship will bring. However, I have now decided that I must study on my own and in that way get more and more skills. I just signed up for an online course http://learnwatchmaking.com which is quite fine and are gathering tool to get properly started. I found this forum when I googled for Elma Super Elite and SSteel has a very fine tread on such a machine ... .. I am looking to use this forum!

PS: Google translate is often my friend .... hope you will bear with it ...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nickelsilver
      What are these Seitz B-Jewels?

      By nickelsilver · Posted

      I've seen some really nice early 20th century pieces where all the jewels, including center wheel, were convex. Definitely to reduce friction. It can be quite hard to tell if a jewel has olive holes, especially on small sizes, but that again reduces friction- as well as accommodates small misalignments better. Why they aren't used more often? I imagine it was found that at a certain point in the train the actual advantage became negligible, and the added cost on high production movements is why it's not seen on those, just higher-end pieces.   I did an experiment on a little 5x7"' AS 1012 a few years back. These things run OK sometimes, but often are absolute dogs. And AS made gajillions of them. I had a NOS novelty watch in for a service, ran OK flat, massive drop in amplitude vertical. Made like 3 staffs for it trying different pivot sizes, no change. Tried high quality (not Seitz) convex/olive jewels, no change- the original were flat, but could have been olive hole. Same for the pallet fork, then escape wheel, no change. Probably had 20 hours in the watch, new staff and new hole jewels through the escape wheel, no difference in running. Just a dog of a movement. But if I were making a watch I would use them, just because.
    • Neverenoughwatches
      What are these Seitz B-Jewels?

      By Neverenoughwatches · Posted

      When Nicklesilver mentioned the use of them on non coned pivots on older high end watches closer to the escapement.  That suggested to me  probably fourth wheels and possibly third wheels. The square shoulder rotatating on the much smaller surface area of a dome as opposed to a flat jewel surface. I'm curious as to why they are not used predominantly?
    • VWatchie
      What are these Seitz B-Jewels?

      By VWatchie · Posted

      That's what I thought, but as I said, it makes sense. See if any of our pros will have something to add.
    • Neverenoughwatches
      What are these Seitz B-Jewels?

      By Neverenoughwatches · Posted

      Kind of guessing here watchie with a bit of logic.
    • rossjackson01
      Canon with FE 4612a movement

      By rossjackson01 · Posted

      Canon with FE 4612a movement. Day and Date display Trying something new. Although is will take some time for me to start, I have a back injury that is very painful and so cannot concentrate. Set myself a target to begin mid May. Purchased a Canon wrist watch with  FE 4612a movement. Advertised with Rotor missing. Arrived, took photographs. Strap broken, removed and place in bin. Back removed. No rotor. Wind is stiff. Can wind up. Everything moves ok. Oscillates for under a minute, then stops. No rotor but all wheels appear the be there. Have sent for a donor movement FE4612. No day wheel.  I have taken basic photographs up to the point of service commencement. I will try a new format and use the record system on the microscope to show the full disassembly subsequent assembly. I will photograph the cleaning process.  Whilst I have no intention beginning a YouTube channel, I would like to begin to make a better record of my work standard. Work to do.  Make case to a better standard. Repair crystal. Replace strap.  Only a thought. I will try to insert an English day wheel. Not sure if it can be done, but hey, what can I lose. Got to stop now, back so sore.
×
×
  • Create New...