Jump to content

Wittnauer back removal

canwdarose
 Share

Recommended Posts

canwdarose Member

canwdarose

Posted
Posted

Good afternoon,

I'm looking ahead to my next project and this is my fathers watch he got from his parents when he graduated from high school back in about 1951.  It runs, and my Dad was particular about his stuff, so I'm sure he had it serviced periodically.  It hasn't been worn for at least 10 years, but it started right up just picking it up out of the drawer.  Anyone recognize it?  I've never seen one like it on Ebay, etc.

the back is a 10 sided wrench affair, and I'm not sure my aftermarket Jaxa style opener is up to this.  It calipers 27.0mm across the flats, so I envisioned trying (in order): the back traction ball, my Jaxa wrench with the flat pins, or having the machinist at work make me a bespoke 2 sided wrench with very crisp shoulders.  I know there are specialist wrenches produced, but...   

id be grateful for other advise from the WRT community, however.

thanks

 

image.jpeg

image.jpeg

Link to comment
Share on other sites
ro63rto Distinguished Member

ro63rto

Posted
Posted

Google Panerai caseback tool.

They are the same style but a lot bigger at 44mm and up.

Do NOT use a Jaxa on this or any homebrew two sided affair.

Get some cling film and cover the watch sealing it well.

Then get some of that metal putty. Mix a large lump and squash it over the clingfilm covered back making sure it only covers the back and not the sides if the case.

Leave finger grips molded into it.

Once set, give it a twist.

This worked for me on an old non valuable watch that wasn't age sealed shut.

Try at your own risk [emoji16] [emoji6]

Link to comment
Share on other sites
JimInOz WRT Addict

JimInOz

Posted
Posted (edited)

I agree with Roberto. Don't try to use a Jaxa or anything else unless you can score a vintage opener somewhere. Roberto suggested the robbers key approach, you may also use the superglue/nut solution which has worked well in the past and is reversible with superglue removal. Your caseback is an ideal candidate for this method and will only require you to get a nice flat surface on the nut (wet and dry paper).

 

I'll see if I can find an example (I'm sure I've seen it here, @Geo ?)

 

Doh!

 

Just use the search for "caseback nut"

Edited by JimInOz
add search info
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

The OP hasn't tried yet a friction ball or similar tool?

Beside, if the watch is not to be used , and is working, It may not need to be opened except for the curiosity.. From the picture all it needs is a strap.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Down the rabbit hole!

      By RichardHarris123 · Posted

      Well done, let us know how you get on with the citizen. 
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • oldhippy
      Without Our Forum

      By oldhippy · Posted

      This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • fnick
      Down the rabbit hole!

      By fnick · Posted

      Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...