Jump to content

Wittnauer back removal

canwdarose
 Share

Recommended Posts

canwdarose Member

canwdarose

Posted
Posted

Good afternoon,

I'm looking ahead to my next project and this is my fathers watch he got from his parents when he graduated from high school back in about 1951.  It runs, and my Dad was particular about his stuff, so I'm sure he had it serviced periodically.  It hasn't been worn for at least 10 years, but it started right up just picking it up out of the drawer.  Anyone recognize it?  I've never seen one like it on Ebay, etc.

the back is a 10 sided wrench affair, and I'm not sure my aftermarket Jaxa style opener is up to this.  It calipers 27.0mm across the flats, so I envisioned trying (in order): the back traction ball, my Jaxa wrench with the flat pins, or having the machinist at work make me a bespoke 2 sided wrench with very crisp shoulders.  I know there are specialist wrenches produced, but...   

id be grateful for other advise from the WRT community, however.

thanks

 

image.jpeg

image.jpeg

Link to comment
Share on other sites
ro63rto Distinguished Member

ro63rto

Posted
Posted

Google Panerai caseback tool.

They are the same style but a lot bigger at 44mm and up.

Do NOT use a Jaxa on this or any homebrew two sided affair.

Get some cling film and cover the watch sealing it well.

Then get some of that metal putty. Mix a large lump and squash it over the clingfilm covered back making sure it only covers the back and not the sides if the case.

Leave finger grips molded into it.

Once set, give it a twist.

This worked for me on an old non valuable watch that wasn't age sealed shut.

Try at your own risk [emoji16] [emoji6]

Link to comment
Share on other sites
JimInOz WRT Addict

JimInOz

Posted
Posted (edited)

I agree with Roberto. Don't try to use a Jaxa or anything else unless you can score a vintage opener somewhere. Roberto suggested the robbers key approach, you may also use the superglue/nut solution which has worked well in the past and is reversible with superglue removal. Your caseback is an ideal candidate for this method and will only require you to get a nice flat surface on the nut (wet and dry paper).

 

I'll see if I can find an example (I'm sure I've seen it here, @Geo ?)

 

Doh!

 

Just use the search for "caseback nut"

Edited by JimInOz
add search info
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

The OP hasn't tried yet a friction ball or similar tool?

Beside, if the watch is not to be used , and is working, It may not need to be opened except for the curiosity.. From the picture all it needs is a strap.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...