Jump to content

Wrong tool for the job


Recommended Posts

Tonight I ran into a problem winding a left handed mainspring. My mainspring winders are all right handed winders. Luckily, I have two winders in the size I needed. So I wound the spring into one, then carefully pressed it out into the other. Then into the barrel. Not ideal, but it works in a pinch.

  • Like 4
Link to comment
Share on other sites

I remember that Marc posted a simple but clever (to me anyway;)) suggestion last year on this. Have a collection of washers in different sizes, then it doesn't matter which way your winder goes. If you need to change orientation it you can transfer the mainspring to a washer, flip it over and press out. Saves having to have spare winders or buying another set going the other way.

 

Stephen

  • Like 3
Link to comment
Share on other sites

I remember that Marc posted a simple but clever (to me anyway;)) suggestion last year on this. Have a collection of washers in different sizes, then it doesn't matter which way your winder goes. If you need to change orientation it you can transfer the mainspring to a washer, flip it over and press out. Saves having to have spare winders or buying another set going the other way.

 

Stephen

That is a good idea, too!

Link to comment
Share on other sites

Tonight I ran into a problem winding a left handed mainspring. My mainspring winders are all right handed winders. Luckily, I have two winders in the size I needed. So I wound the spring into one, then carefully pressed it out into the other. Then into the barrel. Not ideal, but it works in a pinch.

That is a great idea. Thanks

Link to comment
Share on other sites

I remember that Marc posted a simple but clever (to me anyway;)) suggestion last year on this. Have a collection of washers in different sizes, then it doesn't matter which way your winder goes. If you need to change orientation it you can transfer the mainspring to a washer, flip it over and press out. Saves having to have spare winders or buying another set going the other way.

 

Stephen

Don't understand

Link to comment
Share on other sites

14 hours ago, jdrichard said:

Don't understand

Simple. If you only have a right handed winder but your spring needs to be wound left handed, wind it up right handed but instead of installing it into the barrel, install it into a washer. Flip the washer over and then press it into the barrel as you would a new main spring. obviously the hole in the washer needs to be slightly smaller than the inner diameter of the barrel.

  • Like 1
Link to comment
Share on other sites

Simple. If you only have a right handed winder but your spring needs to be wound left handed, wind it up right handed but instead of installing it into the barrel, install it into a washer. Flip the washer over and then press it into the barrel as you would a new main spring. obviously the hole in the washer needs to be slightly smaller than the inner diameter of the barrel.

Got it, thanks

Link to comment
Share on other sites

On 4/5/2016 at 3:49 AM, UrgurTheGurgur said:

Tonight I ran into a problem winding a left handed mainspring. My mainspring winders are all right handed winders. Luckily, I have two winders in the size I needed. So I wound the spring into one, then carefully pressed it out into the other. Then into the barrel. Not ideal, but it works in a pinch.

Moved to Tutorials & Information section :)

Good tip - thanks for sharing.

  • Like 1
Link to comment
Share on other sites

9 hours ago, Folkvisor said:

I recently found this on YouTube: Servicing an IWC FA Jones watch.

I can't find it on the videos on this site. Just wondering if it's there or will be put up soon. It's a beautiful watch and a very good video.

Dave

Lol - very big change in topic from "Wrong tool for the job" apologies to the OP.

@Folkvisor, I have added the video now: 

 

Link to comment
Share on other sites

Your solution to reverse winding was simple but affective like all good ideas.

I'm supposed to take the mainspring out of my 2836-2 movement by hand, clean it, lube it, and put it back by hand. I can see all sorts of problems with this. One of the main problems is that my hand would contaminate the spring with the sweat/oil from my hand and make it susceptible to rusting, etc. So, I'll buy a winder before I attempt this manoeuvre.

Link to comment
Share on other sites

Your solution to reverse winding was simple but affective like all good ideas.

I'm supposed to take the mainspring out of my 2836-2 movement by hand, clean it, lube it, and put it back by hand. I can see all sorts of problems with this. One of the main problems is that my hand would contaminate the spring with the sweat/oil from my hand and make it susceptible to rusting, etc. So, I'll buy a winder before I attempt this manoeuvre.

I have attempted to wind a couple automatic wristwatch mainsprings by hand. But never been successful. I can't get more than a few coils wound in before the while thing explodes in my hands(twss). I gave up trying and found a cheap set of used winders on eBay.

Link to comment
Share on other sites

But what about the opportunity to exercise the very thing that makes human hands such miracles of evolution - the ability to apply immense forces (clamping that damned bridle against the barrel wall) while dexterously holding a 10mm object and a loose, floppy spring end, and simultaneously winding and guiding the spring into the (virtual) center of the spring? Only to realize that you've wound the thing in backwards...

So on the other hand, humans also invented tools so that work was easier and more productive.  Buy the winder, Folkvisor...

Drat, can't "wriggle out of the crushing grip of reason" (Calvin and Hobbes quote, for those that are fans).

Link to comment
Share on other sites

When done with the barrel on the bench is not that difficult. However as mentioned before it's better not to to manipulate the hairspring with bare hands.

Edited by jdm
Link to comment
Share on other sites

Just now, canwdarose said:

But what about the opportunity to exercise the very thing that makes human hands such miracles of evolution - the ability to apply immense forces (clamping that damned bridle against the barrel wall) while dexterously holding a 10mm object and a loose, floppy spring end, and simultaneously winding and guiding the spring into the (virtual) center of the spring? Only to realize that you've wound the thing in backwards...

So on the other hand, humans also invented tools so that work was easier and more productive.  Buy the winder, Folkvisor...

Drat, can't "wriggle out of the crushing grip of reason" (Calvin and Hobbes quote, for those that are fans).

You make hand-winding sound almost appealing - or was that appalling? LOL

I even read Calvin and Hobbes in French; everyone needs a hobby...

Link to comment
Share on other sites

  • 1 month later...


×
×
  • Create New...