Jump to content

Well This A Bit Late.


BeyondWorld

Recommended Posts

Hello, 

 

My name is Justin.

 

I came here after watching marks videos, as they've helped quite alot.

 

I've been dealing in vintage watches since I was 17 and have been doing it for 13 years now.

 

I worked at a second hand goods shop at the age of 16 and the money I got from that I bought a £150 screwback longines from the 1940's and sold it the next week for £250 and then used that money to buy and sell onwards to become a full time watch dealer.

 

Now I specialize in military watches, rolex, omega, jaeger lecoultre, longines, divers watches and chronographs between the years 1920's - 1960's.

 

As for repair work, this is only something I've taken more seriously recently. I've always been able to change a watch glass, take a watch dial off and replace watch crowns with the original watch crowns since I've started.

 

However prices are starting to get really high with my watch maker and I've learned to do some more things with the help of marks videos, such as changing a mainspring and proper cleaning and oiling.

Link to comment
Share on other sites

Also welcome from me as well Justin.

 

Good to have a Dealer on the forum as your advice would no doubt be useful and reciprocated with watch repair advice by the forums greybeards and elders if needed.  Great place this and not too starchy either.

 

Cheers,

 

Vic

Edited by Vich
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • that band is old as stated, there is a kit that pops up from time to time on selling sites for the repair of these type bands, some of this type are adjustable on a few links, one adjustable type allows you to align the round opening in the expansion slit [like yours] with the rivet to separate, but if yours won't come out then the rivet head is too big and will have to be done with some rivet removal and replacement, I suppose if you could make/optain the correct rivets that one could alter the said band, the tops/caps do lift off after raising the tabs....  
    • This is a watch from a friend who sent it to a neighborhood watchmaker for a battery change. It came back with the watch stem in a ziplock bag and the dial skewed 20°. The watchmaker told him that the stem was faulty and the watch cannot be repaired. I opened up the watch and found that one dial foot was broken off and still stuck in the movement, while the other was bent until it was flat against the dial. The stem could be inserted but it couldn't be pulled out to quickset and time adjusting positions. I did a full disassemble, cleaned and oiled the movement. But when it put in the battery, the second hand runs super fast. Like it gains 30 mins every hour. Any advice on fixing this problem? TIA.
    • I determined that the balance staff is rotating, not the roller table, so my second attempt at riveting was unsuccessful. I have ordered a new balance staff and will take measurements when it arrives. The balance staff i originally ordered (and now reordered) was specified as: Replacement balance staff: (A. Schild Caliber 984 1002 1021 1124 Original Balance Staff Part 723) so it should be correct. Measurements: (see pic below for terminology) xxxyy is a place holder until the new balance staff arrives. Lower pivot: Old - .08 mm New - xxxyy Lower pivot to balance seat: Old - 1.53 mm New - xxxyy Roller shoulder: Old - .42 mm New - xxxyy Hub: Old - xxxyy New - xxxyy Balance shoulder: Old - .86 mm New - xxxyy Collet shoulder: Old - .56 mm New - xxxyy Upper pivot: Old - broken New - xxxyy
    • Hello and welcome from Leeds.  We're here to help. 
    • I was just about to adk that, probably they have unnecessary waiting lists to make their watches appear more exclusive than they actually are.
×
×
  • Create New...