Jump to content

Recommended Posts

5 minutes ago, nickelsilver said:

I am American, expated in Schweiz for over 20 years! Yes, tenacious mank is a real problem, actually almost killed us as watchmaking students with a fresh batch of new old stock movements. Through the top of the line machine, garbage. We pegged and pithed for like 2 days to get that mank off and hit 270 amplitude. Would love to know what original oil was used.

Haha. And all we did at joinery school was try to set each other on fire with lit wood shavings and have nail gun shoots outs. Oh fun days, then I had to grow up and become sensible.  Why is my wife laughing and shaking her head ?

Link to comment
Share on other sites

  • 1 month later...

I think I'm ready to abandon the use of lighter fluid to clean my watch parts and use a dedicated ultrasonic solution from either Zenith or L&R.  Question is: if I use a mason jar with the parts baskets in it, do I leave the jar uncovered while ultrasonic-ing, covered with lid but not secured (to allow it to vent), or completely shut with lid?

And how much can I reuse the main cleaner before having to dispose?  How much can I use a rinse before having to dispose?

Does anyone have recommendations for which one to use?  I prefer non-ammoniated, both for the purposes of smell and the possibility of the ammonia attacking the metal.  I know L&R 566 is ammonia free.  Don't know about anything by Zenith.

Edited by GregG
Link to comment
Share on other sites

17 minutes ago, GregG said:

I think I'm ready to abandon the use of lighter fluid to clean my watch parts and use a dedicated ultrasonic solution from either Zenith or L&R.  Question is: if I use a mason jar with the parts baskets in it, do I leave the jar uncovered while ultrasonic-ing, covered with lid but not secured (to allow it to vent), or completely shut with lid?

And how much can I reuse the main cleaner before having to dispose?  How much can I use a rinse before having to dispose?

Does anyone have recommendations for which one to use?  I prefer non-ammoniated, both for the purposes of smell and the possibility of the ammonia attacking the metal.  I know L&R 566 is ammonia free.  Don't know about anything by Zenith.

I use both naptha and ammoniated elma. It makes the parts very shiny although i think is that necessary? It does stink i use an open plastic tub but have an extractor. I noticed pressure build up inside sealed glass  jars when i used them, so maybe just a tiny hole in the lid to vent the pressure. I think you will know when to change the cleaner by looking at its state. I do filter the cleaner but monitor its cleaning efficiency. I also filter quite often just to keep the cleaning up to scratch. I cant say I've noticed the regular filtering effects its performance until its been used for a good while.

  • Like 1
Link to comment
Share on other sites

4 hours ago, GregG said:

if I use a mason jar with the parts baskets in it,

A couple of weeks ago I picked up a set of four of these 300ml jars. The Elma basket fits inside very nicely. I fill the basket with parts, drop into the jar and put that into the ultrasonic, then fill the ultrasonic with water to a point below the rim of the jar. I don't use the lids for the jars but so far I've just been pouring my naphtha and IPA back into their containers. Part of me likes the economy of using naphtha and IPA but I might break down and buy a gallon each of the L&R cleaning and rinse solutions (to last the rest of my life). If I do that, I'll use the lids on the jars.

 

basket and jar.jpg

Edited by grsnovi
clarified "it"
  • Like 1
Link to comment
Share on other sites

3 hours ago, grsnovi said:

A couple of weeks ago I picked up a set of four of these 300ml jars. The Elma basket fits inside very nicely. I fill the basket with parts, drop into the jar and put that into the ultrasonic, then fill the ultrasonic with water to a point below the rim of the jar. I don't use the lids for the jars but so far I've just been pouring my naphtha and IPA back into their containers. Part of me likes the economy of using naphtha and IPA but I might break down and buy a gallon each of the L&R cleaning and rinse solutions (to last the rest of my life). If I do that, I'll use the lids on the jars.

You've been ultrasonic-ing pure naphtha?  What is the flash point of that?  I've read forum posts of people who have sonicated petroleum ether (32F flash point) with no problems.

Link to comment
Share on other sites

1 hour ago, GregG said:

You've been ultrasonic-ing pure naphtha

Yes, in as much as I put the naphtha into the jar and the jar goes into the water bath of the u/s. I don't run the heater on the u/s. So far I haven't blown anything up (but it wouldn't surprise me if I do eventually, nothing else seems to be going right).

I have to say that I'm very likely to switch over to using the $50/gallon L&R cleaners.

Link to comment
Share on other sites

3 hours ago, GregG said:

You've been ultrasonic-ing pure naphtha?  What is the flash point of that?  I've read forum posts of people who have sonicated petroleum ether (32F flash point) with no problems.

I think you mean 32 C' greg otherwise the firebrigades are going to be extremely busy. I have used naptha at 50 degrees Celsius but that was by accidentally turning  the us heater on. I consider myself quite lucky. I stick to around 35 C which the us may reach on its own without the heater on. Still i wouldnt leave it alone running in the room. Check out my homemade gear post. Possibly a better alternative if you are worried. Its a rotary washer made from an old pillar drill , its actually pretty good. Very cheap to make and much quieter. I had plans for a MKII but  MKl  works so well i may not bother now. 

1 hour ago, grsnovi said:

Yes, in as much as I put the naphtha into the jar and the jar goes into the water bath of the u/s. I don't run the heater on the u/s. So far I haven't blown anything up (but it wouldn't surprise me if I do eventually, nothing else seems to be going right).

I have to say that I'm very likely to switch over to using the $50/gallon L&R cleaners.

$50 per gallon ? Which one is that gary ?

Link to comment
Share on other sites

3 hours ago, Neverenoughwatches said:

I think you mean 32 C' greg otherwise the firebrigades are going to be extremely busy

Definitely 32F (see attached picture).

2 hours ago, Paul80 said:

L&R 111 is £50 for 3.8 litres in the UK which I about a US gallon so for 50 bucks you are getting it cheap 😎

I did the math, and petroleum ether comes out to about the same price per ounce as 566 and 111. Difference is you can buy small quantities of lighter fluid XD

Screenshot_20220607-055850.png

  • Like 1
Link to comment
Share on other sites

8 minutes ago, Neverenoughwatches said:

Ok, but im not sure what any of that means. I even have a few friends that are firemen lol

Flash is the temperature when the fumes would briefly ignite if exposed to a  heat source.  So don't have any flames near it, obviously. All it really tells you is that it's volatile I.e has a low boiling point. 

The autoignition temperature means that if it was heated to that temperature it would burst into flames. 

  • Thanks 1
Link to comment
Share on other sites

1 hour ago, grsnovi said:

make sure when you're purchasing this you also purchase the associated rinse that goes with it.

then in the US you can purchase it from Amazon at about $10 more but it includes free shipping. Claims if I ordered it now I can have it by Thursday. So looks like relatively fast shipping.

https://www.amazon.com/Ultrasonic-Ammoniated-Watch-Cleaning-Solution/dp/B06X9CC2RM/ref=sr_1_2?crid=2L7XCW6QIFH2W&keywords=l%26r+s+%23111+waterless+watch+cleaning+solution+ammoniated&qid=1654622753&sprefix=l%26R+111%2Caps%2C161&sr=8-2

  • Thanks 1
Link to comment
Share on other sites

4 hours ago, joaquin said:

 

I have already bought tetrachloroethylene for one dip substitute.

 

If I’m completely honest, I’ve tried the route of tetrachloroethylene as a replacement for One Dip or B Dip. While tetrachloroethylene on its own does an ok job, it’s still not as good as B Dip at the end. Yes, I know tetrachloroethylene is a key ingredient in B Dip (they both even have the same odour), but Bergeon obviously has something else they add to spice up the mix. A 50ml bottle of B Dip goes a long way so I would get a bottle if I was you.

I do agree on the merits of a home made cleaning solution in your case (where importing commercial cleaners are a problem) especially in large quantities. I also use a locally available brew that seems very close to what your link above describes.

Edited by gbyleveldt
  • Thanks 1
Link to comment
Share on other sites

4 hours ago, joaquin said:

Maybe this was already posted in the forum but I can't find any info.

Homemade cleaning solution

What do you think about the recipe? I'm from Spain and I can't get a proper cleaning solution cheap because import taxes but I can gather the ingredients very cheaply.

I have already bought tetrachloroethylene for one dip substitute.

 

I've tried this before but this is recommended for clocks only.

It doesn't work as well as commercial cleaners. The brass comes out shinier but a little patchy. Dried up grease doesn't come off very well. And some steel parts will start to rust the moment it comes out of the solution. I suspect commercial cleaners contain a rust inhibitor which is not listed in the MSDS.

18 hours ago, Neverenoughwatches said:

How do you rate the 111 ? please paul 

L&R #111 is a very good cleaner. It removes stubborn grease, shines up brass and doesn't smell half bad if used in a sealed jar in the ultrasonic. 

The only drawback is the price. It costs $180 SGD in Singapore, which is about £100. And you need the #3 rinse which is the same price.

I try to stretch my dollar by doing a manual pre-clean when disassembling and a pre-soak in benzine before putting it in the #111. And when the solution looks a little cloudy, I put the jar in the freezer to freeze-distill some of the dissolved oils, then filter the solution to remove any particulate matter.

But #111 is way too expensive to use for clocks. 😥

  • Thanks 2
Link to comment
Share on other sites

Thank you for your answers, I understand that professionally made cleaners are the option to go but for the moment I will try with the home made and in the future I will move to the pro option.

I read something about ammonia dissolving shellac, is that true? A lot of professionally made cleaners have an ammonia base so I find it odd.

Link to comment
Share on other sites

Any part that had shellac I always cleaned it in Ronsonal lighter fluid.  I have said that many times on this forum. It is safe you could leave the parts in it for days and it won't come to any harm. Get yourself a small screw on lid jar as it evaporates quick. It is not a rerecorded watch cleaning agent but it works and does a fine job.    

  • Like 2
Link to comment
Share on other sites

10 hours ago, joaquin said:

Maybe this was already posted in the forum but I can't find any info.

Homemade cleaning solution

What do you think about the recipe? I'm from Spain and I can't get a proper cleaning solution cheap because import taxes but I can gather the ingredients very cheaply.

I have already bought tetrachloroethylene for one dip substitute.

 

That's very similar to a mix I found in an old book and also one the local drugstore used to mix up for clockmakers around here, they called it soupe Vaudoise  (canton Vaud is a big watchmaking area). I've used a recipe from the Finnish watchmaking school for years, no problem, no rust, if anything it's a little too gentle- but I'd rather pre-clean and have a gentle cleaner than have one that etches the plates. It's probably been posted above somewhere, but here again

 

1L 99% isopropyl alcohol

3L distilled water

50g oxalic acid

60g oleic acid

around 80 grams of 24% ammonia

In a stainless pot, heat the alcohol and 1L water, add the oxalic acid (powder) and dissolve, add the rest of the water and oleic acid, then add ammonia slowly. It will go cloudy, then turn clear. The ammonia is reacting with the oleic acid making a soap, when it goes clear all the oleic has reacted. This keeps the solution fairly safe for brass, as the ammonia now being a soap doesn't eat the metal like some other cleaners with higher ammonia concentrations.

Rinse in hot water, with a final bath in alcohol before drying with hot air. I have never had a part rust with this, but the final alcohol rinse is important.

 

In that one there's no added soap, since the oleic and ammonia have made a soap. Not sure why Mike adds so much- but again, I've seen similar other solutions.

 

I've also posted somewhere in the past a recipe Gruen suggests when the watchmaker doesn't have access to proper solutions:

Gruen recipe:

1 ounce oleic acid

2 ounces acetone

4 ounces 22% ammonia

25 ounces distilled water

 

Not that different than the Finnish one. The oxalic acid in the Finnish one is a common chemical used to remove rust stains; in high concentration it will remove heavy rust as well. In this dilute concentration I wonder if it acts more as a preventative? Like I said I haven't had rust issues with it.

 

Some will say never use a water based cleaner as- wait for it- it will rust parts. I used Greiner GS watch concentrate as my watch cleaner for many years; this is water based, mixed 1:19 with water, and rinsed in alcohol (in a purpose made machine from Greiner in my case). Once again, no rust issues, and no issues with shellac dissolving unless I forgot the parts in the (hot) alcohol for quite a while.

 

 

  • Like 1
Link to comment
Share on other sites

2 hours ago, joaquin said:

I read something about ammonia dissolving shellac, is that true? A lot of professionally made cleaners have an ammonia base so I find it odd.

It's IPA that affects certain types of Shellac - ammonia based solutions are perfectly safe hence its use in commercial solutions. We spoke about it on another thread yesterday if I recall. In any case I keep pallet forks separate from my usual cleaning regime and they get their own cleaning in Naphta (lighter fluid) then One Dip / B Dip.

Link to comment
Share on other sites

36 minutes ago, nickelsilver said:

I've also posted somewhere in the past a recipe Gruen suggests when the watchmaker doesn't have access to proper solutions:

Gruen recipe:

1 ounce oleic acid

2 ounces acetone

4 ounces 22% ammonia

25 ounces distilled water

I will try this recipe for my next batch as I already have all the ingredients.

The cleaning solution I have made has among its ingredients dish soap that was originally green but now the solution has turned reddish-brown (I suppose the ammonia or acetone has attack de colorant component of the dish soap), I think this is not a problem.

If I do this Gruen recipe should I water it down when using for cleaning?

4 minutes ago, gbyleveldt said:

It's IPA that affects certain types of Shellac - ammonia based solutions are perfectly safe hence its use in commercial solutions. We spoke about it on another thread yesterday if I recall. In any case I keep pallet forks separate from my usual cleaning regime and they get their own cleaning in Naphta (lighter fluid) then One Dip / B Dip.

So only the pallet forks goes to naphta, can I put the rest of the balance wheel and plate in the ultrasonic cleaner (mounted in the movement) or is better to clean it also separately in naphta?

Edited by joaquin
clarification
Link to comment
Share on other sites

1 hour ago, joaquin said:

If I do this Gruen recipe should I water it down when using for cleaning?

 

Here's the document (it's got plenty of other interesting information in it) Gruen Watchmaking Institute Course, page 72

 

As written, it's to be used straight, but it does sound kind of strong. But Gruen knew what they were doing, no doubt about that.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...